BlackBearing B5 BB86/92 25mm Campagnolo
Description
The Blackbearing bottom bracket range has been specifically developed to withstand the most extreme conditions.
The BBlock technology (built in 2 threadable parts) allows a better alignment of the casing in its assembly offering several advantages:
- minimizes possible cracks
- greater protection to the bearing extending its useful life
- an easier replacement of the bearing.
CNC machined aluminum.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-BBUNIV-SHIM
The BBMULTI-SHIM kit adapts Shimano or similar 24mm cranks to virtually any BB30/PF30/BB30a frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm.
This kit includes 2 adapter shims and a 14-piece assortment of left and right side spacers.
Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank.
Machined engineering-grade Delrin.$124.00 (RRP)Add To Cart
-
Stock Code:WMBB-BB30-EBB-BLKStock Code:WMBB-BB30-EBB-GXP-BKStock Code:WMBB-PF30-EBB-BLACKStock Code:WMBB-PF30-EBB-GXPStock Code:WMBB-PF30-EBB-GXP-BL
New Eccentric bottom bracket for use in BB30 frames. Convert your BB30 frame to a single-speed setup with our simple to use bottom bracket.
Compatible with 24mm (Shimano, FSA, Etc.) cranks. Enduro Angular Contact sealed bearings. Double lip seals on all bearings with high fill rate top quality grease for maximum durability. Machined aluminum is superior in function and durability to plastic. Fully serviceable.
- Enduro ABEC-5 Angular Contact sealed bearings
- Fits BB30 bottom bracket shell widths from 68mm to 73mm
- Use with 24mm (Shimano, FSA, Etc.) cranks
** IMPORTANT NOTE: Our Eccentric bottom brackets for BB30 frames will not work with frames that do not have removable c-clips in the shell. If your frame has a shell with a molded step that the bearings press up against, our EBB will not completely fit in to the shell.$279.00 (RRP)$279.00 (RRP)$279.00 (RRP)$279.00 (RRP)$279.00 (RRP) -
Stock Code:WMBB-BBSEAL-SRAMStock Code:WMBB-24MMSEAL
24mm Outer Silicone Seal for Bottom Brackets
Outer seal for Wheels Mfg BB86/92, PF30-OUT, BB30-OUT, BB-ROAD, BB-MTN bottom brackets.
Note: Install seals with rubber-side facing away from bearing.
24mm ID for Drive-Side cup (Both Shimano and SRAM)
24mm ID for Non-Drive Side cup with 24mm crank spindle (Shimano, FSA, etc)
* Sold IndividuallyExpected Date:15 September 2026$15.00 (RRP)$10.00 (RRP) -
Stock Code:WMBB-BB-29MM-0.5Stock Code:WMBB-BB-29MM-1.0Stock Code:WMBB-BB-29MM-2.5-5
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks.
- 29mm I.D.
- 2.5mm thick
- 5 spacers per bag
- Machined engineering-grade Delrin.$29.00 (RRP)$29.00 (RRP)$29.00 (RRP) -
Stock Code:CKBB-AFB2Stock Code:CKBB-AFY1Stock Code:CKBB-AFM2Stock Code:CKBB-AFP1Stock Code:CKBB-AFS1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ T47 30x fits 68mm and 73mm shell widths with 30mm spindles.
This bottom bracket comes packed with King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)
