BlackBearing B5 PF30A 29mm DUB
Description
The Blackbearing bottom bracket range has been specifically developed to withstand the most extreme conditions.
The BBlock technology (built in 2 threadable parts) allows a better alignment of the casing in its assembly offering several advantages:
- minimizes possible cracks
- greater protection to the bearing extending its useful life
- an easier replacement of the bearing.
CNC machined aluminum.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-386EVO-CER-ZERO
Threaded BB for 386EVO frames. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance.
No more creaking. Smooth operation. Fast bearing replacement.
Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).
Bearings: Enduro ZERØ Ceramic Hybrid
Bottom Bracket/Frame Interface: BB386EVO
Bottom Bracket Shell Width (mm): 86.5mm
Bottom Bracket Shell I.D.: 46mm
Crank Spindle Diameter: 30mm
Weight: 126g
*Will accept 24mm and 24/22mm cranksets using Wheels Mfg. 386EVO BB / Crank Adapters$445.00 (RRP)Add To Cart
-
Stock Code:WMBB-T47-BB-SRAM-BB
T47 threaded BB cups for T47 frames and 22/24mm spindle diameter SRAM GXP cranks. Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
1 - 24mm ID wave washer
Bearings: Enduro ABEC-3
Bottom Bracket/Frame Interface: T47
Bottom Bracket Shell Width (mm): 68mm - 132mm
Bottom Bracket Shell I.D.: 47x1.0mm Threaded
Crank Spindle Diameter: 22/24mm
Over Bearing Width: 91.7mm in 86.5mm wide shell*
Tool Pattern: 48.5mm x 16-notch$227.00 (RRP)Add To Cart
-
Stock Code:CKBB-PBB008B
For DUB mountain cranks there are a few extra fitments notes to be aware of.
If you have a 68mm BB shell and a THREADFIT30, BSA bottom bracket you will need two of these 2.5mm Cup Spacers.$24.50 (RRP)Add To Cart
-
Stock Code:CKBB-PBB078
For DUB mountain cranks there are a few extra fitments notes to be aware of.
If you have a 68mm BB shell and a T47 bottom bracket you will need two of these 2.5mm Cup Spacers. SOLD INDIVIDUAL.$24.50 (RRP)Add To Cart
-
Stock Code:WMBB-BB-MTB-1Stock Code:WMBB-BB-MTB-1-6Stock Code:WMBB-BB-MTB-1-3Stock Code:WMBB-BB-MTB-1-7Stock Code:WMBB-BB-MTB-1-1Stock Code:WMBB-BB-MTB-1-5
Wheels Manufacturing standard outboard bottom bracket features Enduro ABEC 3 sealed bearings. Compatible with 24mm (Shimano, FSA, Etc.) cranks. Fully serviceable.
Weight: 98g
Road (68mm Shell width) - Grey anodized, machined aluminum cups
Mountain (73mm Shell width) - Black or Red anodized, machined aluminum cups
Enduro ABEC 3 sealed bearings
Dual silicone seal keeps the contamination out for longer life
Will accept current 24mm spindle (Shimano, FSA, Etc.) cranks$184.00 (RRP)$184.00 (RRP)$184.00 (RRP)$184.00 (RRP)$184.00 (RRP)$184.00 (RRP)
