CHRIS KING ISO-B TWIN BEARING CONVERSION KIT
Convert your existing Chris King mountain hub to Micro Spline with a new driveshell.
- Compatible with all ISO or Centerlock mountain rear hubs with twin-bearing axles.
- Installation requires a T10 Torx and Park Tool FR-1.3 (or equivalent)
- Refer to the Boost Centerlock Service Video for driveshell removal and installation instructions.
If you have an ISO hub with a needle-bearing axle & driver, you will need a Twin-Bearing Conversion Kit.
Convert your existing Chris King mountain hub to XD with a new driveshell.
- Compatible with all ISO or Centerlock mountain rear hubs with twin-bearing axles.
- Installation requires a T10 Torx and Park Tool FR-1.3 (or equivalent)
- Refer to the Boost Centerlock Service Video for driveshell removal and installation instructions.
If you have an ISO hub with a needle-bearing axle & driver, you will need a Twin-Bearing Conversion Kit.
Convert your existing Chris King mountain hub to Micro Spline with a new driveshell.
- Compatible with all ISO or Centerlock mountain rear hubs with twin-bearing axles.
- Installation requires a T10 Torx and Park Tool FR-1.3 (or equivalent)
- Refer to the Boost Centerlock Service Video for driveshell removal and installation instructions.
If you have an ISO hub with a needle-bearing axle & driver, you will need a Twin-Bearing Conversion Kit.
Webshops and Bike shops
Related Products
-
Description
Wheels MFG Axle-15 Front Quick Release 110x9.0x26 Campy Compatible
• Fits Campagnolo / Italian front hubs
• Thread Pitch: 9mm x 26
• Length: 110mm
• Hollow Axle
• 1 axle per bag
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. -
Description
Chris King Rear Axle for R45 Disc 135 x 10mm QR Axle, R45D Campy Gen2
* This part is for for Gen 2 R45 hubs (hubs starting with serial number 6910). -
Description
Looking for a front axle that is easy to use, lightweight and looks great? Wolf Axle is the perfect fit. Available in a variety of colors and standard or Boost spacing. Easily installed with a 6 mm hex key.
Unlike other similar products, Wolf Axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles.
Always apply a small amount of grease to the washer and threads when installing.
Compatibility
- Fox suspension forks
- 100 mm (standard) or 110 mm (Boost) with the below exceptions
- Not compatible with 2021 Fox F36 and F38 forks
- Similar to Fox Kabolt axle but with more color choices and beautiful Wolf Tooth design. -
Description
Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.
Product features:
- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles
Tech Specs:
- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA -
Description
Wolf Tooth Front Axles are lightweight, easy to use, and friendly with your fork. They are available in a variety of colors and lengths for Standard, Boost, and Fat Bike forks. They use a captive steel washer under the head that protects your fork, transfers more of the tightening torque to the clamping load for a stiffer interface, and prevents the axle from sticking or galling when you want to remove it. The new updated Wolf Tooth Front Axles now have an o-ring that makes them compatible with the Wolf Tooth Axle Handle Multi-Tool.
Compatibility
- Fox suspension forks
- 100 mm (standard) or 110 mm (Boost) with the below exceptions
- Not compatible with 2021 & newer Fox F36 and F38 forks
- Similar to Fox Kabolt axle but with more color choices
