Wolf Tooth BB Socket 46mm 12notch
Description
BBS4612: 12 notch BB socket for 46mm diameter notch pattern, BB386, Race Face 30mm Spindle, TF47, SRAM DUB, RaceFace Cinch, Zipp Vuma, Rotor BSA30, Hawk Racing BB3086, Cane Creek Hellbender, and more.
Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with 7075-T6 aluminum.
- Large finger notches so you can start threading the cups by hand
- 3/8" square socket or 1" hex for ratchet/torque wrench
- Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets
- Steel inserts for magnetic coupling compatibility with the Pack Wrench
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6901OA-2
Our 6901 over axle adapter is used to press 6901 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6901 bearing
Outer Diameter: 23.8mm
Thickness: 17mm
Thru Hole Diameter: 12.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)$21.00 (RRP)Add To Cart
-
Stock Code:WMTL-6900OB
Our 6900 open bore adapter is used to press 6900 sealed bearings. The adapter is machined with one step at 9.9mm OD, which fits into the center of the sealed bearing.
- Installs: 6900 bearing
- Inner Step Outer Diameter: 9.9mm
- Outer Diameter: 21.8mm
- Thickness: 5.9mm
- Thru Hole Diameter: 5.2mm
- Inner hole sized to fit quick release skewer or M5 bolt
- Compatible with PRESS-2
- Machined, red anodized aluminum
- Sold individually (2 drifts required for some installations)$21.00 (RRP) -
Stock Code:WTTLFWI-H16
Steel hex wrench inserts were designed to pair with the Pack Wrench - Ultralight 1 Inch Hex and Bottom Bracket Wrench.
The aluminum wrench (sold separately) has magnets that hold the inserts in place
Made in the USA and CNC machined from hardened steel with electroless nickel plating
Inserts each sold separately
We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 50 lbs of tools. To help with this we developed some very specific Pack Tools that are high quality but weight conscious for those that do mobile wrenching, travel with their bike, or just want one set of tools that can be thrown in when heading to the trail. While the Pack Wrench is lightweight, we wouldn't necessarily call the inserts lightweight. We made the inserts out of steel for extra strength and durability.$39.43 (RRP) -
Stock Code:WTTLOP1RED
This opener grips the bottle cap like a wolf on prey and pops it right off every time! We even added a slot for truing your brake rotors and a large hole for a keychain or carabiner. This is not just some generic opener we selected from a catalog – this is a precision engineered tool that you will want to have with you all the time. Weight is a mere 32g so you can carry it with you wherever you go (even on the bike).
- Precision shaping for the best bottle opening experience
- Rotor truing slot for getting those rotors just perfect
- Hole for key chain or carabiner$29.55 (RRP)Add To Cart
-
Stock Code:WTTL-8-BIT-TL-KIT-ONE
8-BIT TIRE LEVER + DISC BRAKE MULTI-TOOL A double-sided multi-tool with a tire lever on one end and disc brake support on the other. The high-strength plastic lever easily removes tires without damaging the rim. On the machined end of the multi-tool, an 8mm flare wrench can open and close the compression nut on hydraulic brakes and there is a slot for truing rotors up to 2.5mm thick.
8-BIT TIRE LEVER + RIM DENT REMOVER MULTI-TOOL The high-strength plastic lever slips under the tire and removes tires easily without slipping out from metal or carbon rims. The rim dent remover perfectly fits over the lip of metal rims for repairs.
This multi-tool is designed to work on its own or be grouped with other 8-Bit System multi-tools. The multi-tools nest together via magnets and clever machining. These tools were designed to solve most trailside fixes to get you back to the trailhead or next town. They are strong, versatile, lightweight, and small enough to fit in a jersey pocket or riding tool wrap.$59.85 (RRP)Add To Cart
