Wheels MFG BB Extractor Essential Kit
Description
These extractors remove sealed bearings with inside diameters from 22, 24, 29, and 30mm
Bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size-specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.
Removes these sealed bearing sizes: 6806, 24x37, 29DUB, GXP22
4-piece set includes:
(1) 22mm ID Bearing Extractor
(1) 24mm ID Bearing Extractor
(1) 29mm ID Bearing Extractor
(1) 30mm ID Bearing Extractor
(1) Spare parts bag
(1) bolt set
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-BB-OB
DESIGNED TO PRESS IN ALL CURRENT WHEELS MFG BOTTOM BRACKETS!
Our universal bottom bracket drift is designed to press all current Wheels Mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed in the Compatibility tab below. Each step is laser etched with the diameter size.
Drift can also can be used as a frame bottom bracket shell sizing guide!
Recommended for use with Wheels Mfg Universal BB Press, but can be used with PRESS-1 or PRESS-4 handles.
-Inner hole sized to fit 1/2" threaded rod
-Compatible with any other press with a 1/2" diameter rod
-Machined aluminum
-Anodized Red
* Sold individually (2 drifts required for some installations) *$42.00 (RRP)Add To Cart
-
Stock Code:WMTL-BR-5
Wheels Mfg Bottom Bracket wall chart shows most popular bottom bracket standards and cranksets in an easy to read reference chart detailing the easiest way to determine what bottom bracket, cranks and adapters your shop will need to service most bicycles.
- 24" wide x 36" high
- Printed on one side only$10.02 (RRP) -
Stock Code:CKTL-TBB007
The Chris King® Bottom Bracket External Cup Tool is anodized aluminum and features a 3/8" socket drive. Ahigh-quality torque wrench is recommended for installation. The spline interface on the reverse side perfectly matches the Chris King® Bottom Bracket cups to ensure a secure fit during installation while preventing damage to the finish of the bracket.
For use with Chris King Threadfit T47 30i and 24i Bottom Brackets.Expected Date:06 June 2024$90.00 (RRP) -
Stock Code:WMTL-BBGAUGE
The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. The gauge can measure:
bottom bracket width
bottom bracket shell inner diameter
crank spindle length
crank spindle diameter
bearing inner diameter
A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching.
Overall size 7" x 3" x 0.125".$45.15 (RRP)Add To Cart
-
Stock Code:WMTL-BE-24MM-SET
Sealed bearing extractor for 24mm ID bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles.
This extractor is part of a system that requires additional pieces to function.$42.00 (RRP)Add To Cart
