Wheels MFG E-bike Socket 60mm Gen1 Bosch
Description
Compatible with 60mm Gen 1 Bosch Lockring.
Designed to save the mechanic time and money, our new e-bike lockring sockets are machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. • Precision machined aluminum body • Anodized in Wheels MFG red.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Our 2437 open bore adapter is used to press 24x37 sealed bearings in to Shimano compatible bottom bracket cups, and direct fit frames like Trek BB90. The adapter is machined with one step at 24mm OD, which fits in to the center of the sealed bearing.
Use with 24x37x7 bearing
Outer Diameter: 37mm
Inner Step Diameter: 24mm
Inner hole sized to fit 3/8" threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, anodized gray aluminum
Sold individuallyStock Level:In StockStock Level:In StockStock Level:1Stock Level:2Stock Level:1Stock Level:In StockStock Level:In StockStock Level:In StockStock Level:2Stock Level:1Stock Level:1Stock Level:In StockStock Level:2Stock Level:1Stock Level:2Stock Level:In Stock$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Stock Level:In StockStock Level:1Stock Level:In StockStock Level:1Stock Level:2Stock Level:2Stock Level:2Stock Level:2Stock Level:2Stock Level:1Stock Level:Out of StockStock Level:In StockStock Level:In Stock$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-6003-EXT
Individual extractor for removing 6003 Bearing ID: 17mm / OD: 35mm / Width: 10mm
Stock Level:In StockStock Level:In Stock$46.20 (RRP)Add To Cart
-
Stock Code:WMTL-6002-EXT
Individual extractor for removing 6002, 6702, 6802, 6902, 15268 & 15267 sealed bearings with 15mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.Stock Level:Out Of StockStock Level:Out of Stock$49.35 (RRP) -
Stock Code:WTTL-AXLE-TOOL-GRN
The Wolf Tooth Axle Handle Multi-Tool is a minimalist, lightweight option to cover 10 essential tool functions. It is stored at the end of a Wolf Tooth rear axle during rides as a multi-tool that is easy to access for quick adjustments and trailside fixes.
An O-ring on the inside of the axle’s threaded end locks the Axle Handle Multi-Tool in place so it is secure while riding. On one side of the handle is a 5mm hex end stepped to 6mm closer to the handle that fits into the end of an axle. The other side of the handle has a 4mm opening for double-sided hex bits that nest on the inside of the handle via magnet. It was designed for Wolf Tooth axles, though is compatible on other axles that have a threaded end.
Four hex bits are included with the Axle Handle Multi-Tool. Two bits can then be selected to be stored in the back of the tool based on the functions that you use the most. Each bit has two functions. So if you find yourself frequently reaching for the 4mm hex on a multi-tool in your frame bag, the Axle Handle Multi-Tool makes it quickly available and always within reach, without needing to unpack your tool wrap on the trail.
- Four hex bit options are included, allowing the cyclist to select functions most frequently used: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible
- Designed for Wolf Tooth rear axles with a female threaded head-end but also compatible with axles from Trek and other manufacturers that have a removable handle retained with an o-ring"
- Available in eight colors to match other Wolf Tooth anodized components and accessories
- Designed, engineered, and machined at Wolf Tooth in Minnesota with 6061-T6 aircraft-grade aluminum
Compatibility
- Designed for Wolf Tooth rear axles with a female threaded head-end but also compatible with axles from Trek and other manufacturers that have a removable handle retained with an o-ring"Stock Level:1Stock Level:1$73.50 (RRP)Add To Cart