Wolf Tooth BB Socket 41mm 16notch
Description
BBS4116: 16 notch BB socket for 41mm diameter notch pattern, Shimano 105, Ultegra BBR60 and 6800, XT MT-800
Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with 7075-T6 aluminum.
- Large finger notches so you can start threading the cups by hand
- 3/8" square socket or 1" hex for ratchet/torque wrench
- Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets
- Steel inserts for magnetic coupling compatibility with the Pack Wrench
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Our 2437 open bore adapter is used to press 24x37 sealed bearings in to Shimano compatible bottom bracket cups, and direct fit frames like Trek BB90. The adapter is machined with one step at 24mm OD, which fits in to the center of the sealed bearing.
Use with 24x37x7 bearing
Outer Diameter: 37mm
Inner Step Diameter: 24mm
Inner hole sized to fit 3/8" threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, anodized gray aluminum
Sold individuallyStock Level:In StockStock Level:In StockStock Level:1Stock Level:2Stock Level:1Stock Level:In StockStock Level:In StockStock Level:In StockStock Level:2Stock Level:1Stock Level:1Stock Level:In StockStock Level:2Stock Level:1Stock Level:2Stock Level:In Stock$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Stock Level:In StockStock Level:1Stock Level:In StockStock Level:1Stock Level:2Stock Level:2Stock Level:2Stock Level:2Stock Level:2Stock Level:1Stock Level:Out of StockStock Level:In StockStock Level:In Stock$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP) -
Stock Code:WTTL-8-BIT-KIT-ONE
The 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes to keep you rolling to the trailhead or next town. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. The three neatly nest together using magnets and clever machining for compact storage.
8-BIT PACK PLIERS MULTI-TOOL has 17 functions. On one end of the multi-tool, an 8mm hex swivel head serves as a driver for the bits that are stored inside: flat head #3.5 and phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, and 6mm hex; and T10 and T25 Torx-compatible bits. A spoke wrench and valve core wrench are stored on the back and a rasp is on the inside of the upper handle for clearing sealant from valve stems. On the other end of the multi-tool, pliers for master link installation/removal and tightening/loosening of valve stem nuts.
8-BIT TIRE LEVER + RIM DENT REMOVER MULTI-TOOL has two functions. A slender, ergonomic plastic tire lever is on one end opposite of a machined aluminum rim dent remover. The tire lever will work with all tubed and tubeless tires, while the rim dent remover is compatible with all metal rims.
8-BIT CHAINBREAKER + UTILITY KNIFE MULTI-TOOL has three functions. It has a chainbreaker on one end and a retractable utility blade on the other. The chain tool is operated by an included 3mm hex L key that doubles as a tire plug inserter. A machined slot fits the L key and converts the entire multi-tool into a tire plug inserter, with the forked end of the L key extending outward. The handles of this multi-tool slide open to provide storage for tire plug inserts, a valve core, and a spare mini utility blade.
Each multi-tool can be paired with any other multi-tool or both. They are sold separately and in this group of three. All existing 8-Bit Pack Pliers are compatible with the two new 8-Bit System multi-tools.Stock Level:1Stock Level:1$204.75 (RRP)Add To Cart
-
Stock Code:WMTL-SS-30Stock Code:WMTL-SS-15-25Stock Code:WMTL-SS-17-25Stock Code:WMTL-SS-17-35
Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up. 15mm thru hole size makes this perfect for use on hubs with larger axles.
Compatible with:
PRESS-4 - Economy Press
PRESS-1 - Large Sealed Bearing Press
PRESS-1 Handle & Rod Assembly
Length: 25mm
OD: 23.8mm
ID: 15.1mm
Machined Aluminum
*Sold individuallyStock Level:In StockStock Level:In StockStock Level:In StockStock Level:In StockStock Level:Out of Stock$15.75 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP) -
Stock Code:BBTL-CALLIPERStock Level:In StockStock Level:In Stock$58.66 (RRP)
Add To Cart