- Home /
- Components /
- Chain rings /
- Wolf Tooth Chainring 1x bolt+nut 4xEspre
Wolf Tooth Chainring 1x bolt+nut 4xEspre
Description
We designed these bolts to be the best on the market. These are 6 mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs.
- Any of our bolt-on Drop-Stop® chainrings with through holes
- Works with other brands single chainrings as well
Material: 7075-T6 aluminum
Size: M8 x.75 x 5
Torque spec: 7-8 NM tightening torque with light grease on threads only
Made in the USA
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WTCH5CBCN06BLK
We designed these bolts to be the best on the market. These single chainring optimized bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut so no spanner is needed. These are 6 mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs.
Compatibility
- Any of our bolt-on Drop-Stop® chainrings with through holes 110 BCD and 130 BCD
- Works with other brands single chainrings as well
Material: 7075-T6 aluminum
Size: M8 x.75 x 5
Torque spec: 7-8 NM tightening torque with light grease on threads only
Made in the USAStock Level:1Stock Level:1$50.40 (RRP)Add To Cart
-
The 88 BCD for Shimano's XTR M985 crankset was one of the first additions to our chainring line. We added this early on because this crankset is one of our favorites for durability, weight, q-factor, and aesthetics. These rings are beautifully machined to match the contours of the crankset.
- Fits Shimano M985 race crankset
- Drop-Stop® technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.
- Alternating wide/narrow tooth pattern prevents chain derailmentStock Level:Out Of StockStock Level:Out of Stock$158.00 (RRP) -
Stock Code:WTCH-SDM8-38Stock Code:WTCH-SDM8-40Stock Code:WTCH-SDM8-42Stock Code:WTCH-SDM8-44
Direct mount chainrings for SRAM cranks with 8-bolt mounting replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet.
Compatibility
- These direct mount chainrings will replace your existing chainring and spider or replace the direct mount chainring for SRAM AXS cranksets and other cranks that use the 8-bolt mounting. Most SRAM cranksets have traditionally used a 3-bolt mounting, but the 8 bolt mounting has always been used on the Quarq power meter cranks. Now some non-power meter cranks like SRAM AXS use the 8-bolt mounting.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability
- 6mm offset
- Chainline 45mmStock Level:In StockStock Level:Out of StockStock Level:2Stock Level:In StockStock Level:Out of StockExpected Date:31 May 2024Expected Date:31 May 2024$167.90 (RRP)$167.90 (RRP)$167.90 (RRP)$178.50 (RRP) -
Stock Code:WTCHOVAL-RFC30Stock Code:WTCHOVAL-RFC30-BSTStock Code:WTCHOVAL-RFC32Stock Code:WTCHOVAL-RFC32-BSTStock Code:WTCHOVAL-RFC34Stock Code:WTCHOVAL-RFC34-BSTStock Code:WTCHOVAL-RFC34-BST-BStock Code:WTCHOVAL-RFC36-BST-BStock Code:WTCHOVAL-RFC36-BSTStock Code:WTCHOVAL-RFC28-BSTStock Code:WTCHOVAL-RFC40-BST
Elliptical Direct Mount Chainring for Race Face Cinch Boost / 3mm Offest
Compatibility
- Any Race Face Cinch(TM) system crankset (including Next SL, Sixc, Turbine, Aeffect)
- Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)
- Chainline 49mm (standard), 52mm (Boost)Stock Level:In StockStock Level:2Stock Level:In StockStock Level:In StockStock Level:2Stock Level:In StockStock Level:Out of StockStock Level:In StockStock Level:2Stock Level:Out of StockStock Level:Out of StockStock Level:Out of Stock$158.00 (RRP)$138.25 (RRP)$138.25 (RRP)$158.00 (RRP)$148.15 (RRP)$148.15 (RRP)$158.00 (RRP)$158.00 (RRP)$158.00 (RRP)$138.25 (RRP)$158.00 (RRP) -
Stock Code:WTCH-SHEP8-32-BStock Code:WTCH-SHEP8-32-STStock Code:WTCH-SHEP8-34-BStock Code:WTCH-SHEP8-34-ST
Wolf Tooth Direct Mount Chainrings for Shimano E-Bike Motors have a 55mm chainline and are compatible with all Boost and Super Boost bikes that use the Shimano EP8, E8000, and E7000 e-bike motor splines.
- The Drop-Stop B tooth profile is compatible with almost all 9-, 10-, 11-, and 12-speed chains – the only exception is Shimano Hyperglide+.
- The Drop-Stop ST tooth profile is only compatible with Shimano Hyperglide+ chains.
- Direct Mount Chainrings for Shimano E-Bike Motors are machined with 7075-T6 aluminum at Wolf Tooth in Minnesota, USA.Stock Level:In StockStock Level:2Stock Level:In StockStock Level:In StockStock Level:2$167.90 (RRP)$167.90 (RRP)$167.90 (RRP)$167.90 (RRP)