Salsa Guide 35.0 Carbon Bar 800x40mm
Description
Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence.
- Unidirectional carbon fiber construction
- 35.0 mm bar clamp diameter
- 8-degree back sweep with 5-degree up sweep
- 800 mm width with marked lines for easy trimming to desired width
- Tested to ASTM 4 for extreme off-road riding with drops up to 48 inches
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SMHB27731
6061-T6 shotpeened aluminum handlebar that offers multiple hand positions for comfortable riding. Will accommodate bar end shifters.
- Width: 505mm
- Drop: 60mm
- 25.4mm clamp diameter
- 23.8mm grip diameter
- Weight: 320g$113.56 (RRP) -
Stock Code:SMHB27869Stock Code:SMHB27872Stock Code:SMHB27801
The Sparrow is a touring/townie bar. The 490mm version is more agile for squeezing through traffic than other townie/MTB bars. The 520mm is still narrow, but with a grip area that fits levers and shifters. The 560mm size is better for climbing and single-speeders. Try all the sizes on a single-speed or fixie. Can be used flipped to be used as a riser bar or down for a less upright position.
- Shotpeened Tange Aluminum
- Widths: 560 mm, 520mm or 490mm
- Silver or Black
- 25.4 mm clamp diameter
- 50mm drop/rise
- 22.2mm grip diameter, 20.0mm inside diameter at ends to allow use of pursuit levers.
- Weight 245g$113.56 (RRP)$113.56 (RRP)$113.56 (RRP) -
Stock Code:TNHB-HB-E128
Thomson Cyclocross 42x31.8 Carbon
Clipon compatible keep all accessory clamps inside the area marked on the bar as safe for clamping. 90mm total safe clamp area available.
For Cyclocross we present the carbon CX bar. The natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a completely round bar when wrapped. Top profile is round and as wide as possible. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
Reach 78.5mm. Drop is proportional.
Cross drops are: 40CM 131mm, 42CM 133mm, 44CM 135mm.$355.00 (RRP) -
Stock Code:SAHB-HB8360
Woodchipper is Salsa’s signature drop bar for off road riding, where it’s unique shape delivers comfort and control no matter how rough the terrain. Woodchipper bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop.
Unidirectional carbon fiber construction
Ergonomic design works well with integrated road shift/brake levers or bar-end shifters
Drop/Reach: 114/56mm
31.8mm clamp diameter with 140mm width for use with Salsa Anything Cradle and aerobars
27 deg flare and 38 deg drop angles
The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25 deg downward angle of the dropsPOA -
Stock Code:SAHB-HB8245
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether out exploring a new trail or devouring your favorite descent, they'll help keep you in control and ready for the terrain ahead.
- Lightweight and strong 6061-T6 alloy construction with bead-blasted finish
- Graduated lines for easy trimming
- 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars
- Signature 11 deg back, and 6 deg up sweep with 20mm rise
- Note: Rustler bars are not compatible with bar endsPOA
