Salsa Guide 35.0 Carbon Bar 800x10mm
Description
Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence.
- Unidirectional carbon fiber construction
- 35.0 mm bar clamp diameter
- 8-degree back sweep with 5-degree up sweep
- 800 mm width with marked lines for easy trimming to desired width
- Tested to ASTM 4 for extreme off-road riding with drops up to 48 inches
Webshops and Bike shops
You may also be interested in...
-
Stock Code:PSHB-SM5700Stock Code:PSHB-SM1071Stock Code:PSHB-SM1070Stock Code:PSHB-SM5701Stock Code:PSHB-SM5319$19.00 (RRP)POAPOAPOAPOAPOA
-
Stock Code:SMHB27845
29ers have a naturally high front end. This is also true of 26ers with long travel forks. This may result in an undesirably upright ride position. The Odin gives you the extra sweep of a riser bars without the rise. Rotate slightly to add a bit of downward or upward sweep.
- Tange Aluminum
- Width: 715mm (28.15")
- Shotpeen Black
- 25.4 mm center
- 15° sweep
- Zero rise
- 360 grams
.$144.00 (RRP) -
Stock Code:TNHB-HB-E128
Thomson Cyclocross 42x31.8 Carbon
Clipon compatible keep all accessory clamps inside the area marked on the bar as safe for clamping. 90mm total safe clamp area available.
For Cyclocross we present the carbon CX bar. The natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a completely round bar when wrapped. Top profile is round and as wide as possible. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
Reach 78.5mm. Drop is proportional.
Cross drops are: 40CM 131mm, 42CM 133mm, 44CM 135mm.$355.00 (RRP) -
Stock Code:SLHB-HB0100
If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that’s your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don’t you worry. We added cut marks so you can easily make it so.
- Material: CroMoly steel
- Clamp diameter: 31.8mm
- Width: 735mm; Cut marks for 685mm
- Rise: 27mm
- Sweep Angle: 34 degrees
- Weight: 709g
- Color: Black$215.00 (RRP)POA -
Stock Code:WSHB-HB2616
The No.9 Mountain carbon handlebar features full unidirectional carbon construction. At 800mm wide, this bar allows for a custom fit.
- Matte unidirectional carbon construction
- Trimmable ends, made easy with graphic markings
- No rider weight limit
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"
- 31.8mm clamp, no rise or upsweep$320.00 (RRP)POA
