SOMA HIGHWAY ONE HANDLEBAR
Road bar with a round compact bend and shallow drop. Shape makes it easy to get into a natural position in the drops and brake levers are within easy reach.
- 6061-T6 aluminum
- Drop: 130mm
- Reach: 75mm
- 26.0 or 31.8mm center
- Single groove
- Black or silver polished finish
- 38cm to 46cm
.
Road bar with a round compact bend and shallow drop. Shape makes it easy to get into a natural position in the drops and brake levers are within easy reach.
- 6061-T6 aluminum
- Drop: 130mm
- Reach: 75mm
- 26.0 or 31.8mm center
- Single groove
- Black or silver polished finish
- 38cm to 46cm
.
Webshops and Bike shops
Related Products
-
Description
A roomy riser bar with about 25° of backsweep for a natural wrist position. Offers comfort without sacrificing hardly any control. Dream Cycle Vancouver helped us design this model. They wanted to replicate something close to bars found on MTB bikes of the early 80's. Recommended for bikepacking and touring.
– 6061 T6 aluminum
– 780mm width
– 50mm rise
– 31.8mm center
– 25° backsweep
– 5° upsweep
– 420 grams -
Description
Woodchipper is Salsa’s signature drop bar for off road riding, where it’s unique shape delivers comfort and control no matter how rough the terrain. Woodchipper bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop.
Unidirectional carbon fiber construction
Ergonomic design works well with integrated road shift/brake levers or bar-end shifters
Drop/Reach: 114/56mm
31.8mm clamp diameter with 140mm width for use with Salsa Anything Cradle and aerobars
27 deg flare and 38 deg drop angles
The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25 deg downward angle of the dropsPOA -
Description
Riser bar with extra bend, but a low rise. Not as much bend as Soma's original Dream Riser, but enough so grips don't get in the way of large bar bags.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 25mm
– Backsweep: 20 degrees
– Upsweep: 5 degrees
– Weight: 425g -
Description
If you find your current bars were cut too short or designed too short to fit your brake lever and shifter set up, check these out.
Attach these to your bar ends to add 50mm (2") to each side of your bar. Also useful if you want to your cruiser bars to reach back a little farther.
- For city/MTB bars with 22.2mm OD.
- Aluminum constuction
- 50mm of extension per unit
- The resulting fit is not perfectly seamless, but good enough to where it should feel normal after grips are installed.
- DO NOT use on bars that have been partially machined out at the ends (to fit bar end shifters or reverse levers) This includes Soma Oxford, Sparrow and 3-speed II bars
- ID not sized to accept reverse levers or bar end shifters.
- Requires a 6mm hex key (2 inches long) to install -
Description
Whether you're building the ultimate bikepacking rig, hardtail mountain bike, or trusty commuter, the Top Shelf Flat Bar is designed to dramatically improve comfort and reduce fatigue with 50mm or 70mm of rise.
The 14 degrees of backsweep provides a more natural wrist position without sacrificing off-road control and braking. The signature crossbar design allows you to load up your accessories or be paired with the purpose built Top Shelf Handlebar Bag for a clean, rattle-free setup. The Top Shelf Flat Bar is equally at home cruising pavement, grinding gravel, or tackling rugged backcountry routes.
SPECS:
- Material: 6061 T6 Aluminum, Anodized Black Finish
- Geometry: 800mm wide, 14° backsweep, 5° upsweep
- Clamp diameter: 31.8mm, crossbar is 22.2 and shims are available for mounting
- Weight at 800mm: 544g for 50mm rise and 552g for 70mm rise
- Trimmable ends allow you to fine-tune the width for your ideal fit.
