CHRIS KING ISO REAR HUB PARTS
Chris King Rear 130mm Single Speed Axle bolt on
Chris King® Rear Thru-Axle - 135mm x 10mm
• Fits 135mm or 142mm Chris King ISO Rear Hubs (not compatible with 150mm, 157mm or Singlespeed Hubs).
• Allows you to run a 135x10mm Thru Axle on 135mm or 142mm Chris King ISO Hubs.
Chris King Rear Thru-Axle - 135mm x 12mm
• Fits 135mm or 142mm Chris King ISO Rear Hubs (not compatible with BOOST 148, 150mm, 157mm or Singlespeed Hubs).
• Allows you to run a 135x12mm Thru Axle on 135mm or 142mm Chris King ISO Hubs.
Chris King Rear 150 x 12mm Thru-Axle (2012 hubs or older)
Chris King 157x12mm Rear Thru-Axle Generation
Note: This Generation 2 157x12mm thru-axle is only compatible with 157x12mm and 150x12mm Hubs that were bought in 2013 or later. It will not fit 157x12mm hubs from 2012 or older
Chris King Adjusting Clamp Rear ISO Disc or Rear Single Speed Disc hub
If you need an adjusting clamp for a Chris King non-disc rear hub (Classic or Single Speed,) please see part number PHB702.
Chris King Adjusting Clamp Rear ISO Disc or Rear Single Speed Disc hub BLACK
If you need an adjusting clamp for a Chris King non-disc rear hub (Classic or Single Speed,) please see part number PHB702.
Chris King Rear 142x12mm Disc Hub Thru Axle End Cap - Drive Side
For Non-Drive Side use PHB575
Chris King R 135mm ISO Hub Axle End cap
This 140mm axle end is specified for Chris King® Rear Tandem hubs.
Select from side bar
Chris King Rear 135x10mm QR ISO Disc hub Axle (classic disc) 1 piece.
DOES NOT INCLUDE QR end caps or fun bolts. These must be purchased separately.
Use PHB705 if QR needed
Use PHB507 for Fun bolts
• Fits Chris King ISO Rear Hubs (not compatible with 150mm, 157mm, BOOST or Singlespeed Hubs).
• Replacement for 2-piece Axle and allows you to change any bolt on axle to a QR Axle.
Drive & Driven Ring SS pr
Drive Ring and Driven Ring for all Chris King hubs except R45. Driven Ring includes 0-ring.
Chris King Driveshell - Aluminum - With bearings included
This is the Aluminum drive shell that comes standard on Chris King Classic and ISO Disc hubs.
Chris King Aluminium driveshell to fit Classic and ISO hubs (NOT R45).
Bearings NOT included.
Parts to convert your existing Chris King ISO driveshell to XD.
For Chris King REAR Classic, ISO Disc, Single Speed, or BMX hubs only
Webshops and Bike shops
Related Products
-
Description
Chris King Driveshell, R45, 11 Speed- No Bearings
Specific R45 tool will be needed to convert 9/10spd to 11speed -
Description
Wheels MFG Cone R060 10mmx1 Shimano Rear Right 1 per
Compatible Hubs:
• Tiagra 4400, 9 Speed Rear•105 SC 1056, 8 Speed Rear
• 105 SC 1055, 7 Speed Rear
• 105 SC 1051, 7 Speed Rear
• RX100 A551, 8 Speed Rear
• RSX 410, 7 Speed Rear
• XT M737, 8 Speed Rear
• XT-II M732, 7 Speed Rear
• Deore LX M565, 8 Speed Rear
• Deore LX/Mtn LX M550, 7 Speed Rear
• STX-RC MC38, 8 Speed Rear
• STX-RC MC30, 7 Speed Rear
• STX MC32/33, 7 Speed Rear
• Nexave IMC50, 8 Speed Rear
• Alivio MC18, 8 Speed Rear
• Alivio MC12, 7 Speed Rear
• Acera-X MC290, 7 Speed Rear
• Altus RM-40, 7 Speed Rear
• FH-R080 Silent Hub, 8 Speed Rear
• FH-R050 Silent Hub, 7 Speed Rear
• Compatible with Shimano Rear 10 mm x 1 axle
• Shimano Right Rear Cone
• 1 cone per bag -
Description
Wheels MFG Cone R089 9.5mm (3/8") x26 Joytech/Sovos Front 1 per
• Fits: JoyTech 9.5mm x 26, rear alloy, steel front hubs
• Compatible with 9.5mm x 26tpi axle
• Diameter: 17.0mm
• Length: 13.8mm
• 1 cone per bag -
Description
Drive Ring and Driven Ring for all Chris King® R45 hubs.
Expected Date:07 July 2025 -
Description
These simple, 5mm lightweight aluminium spacers are designed to fit onto Thru-type hub axles to enable regular 100mm spaced hubs to fit into 110mm (Boost) type spaced fork thru-axle dropouts. (1 x 5mm spacer added each side = 10mm)
