CHRIS KING BMX FRONT HUB
The 36-hole front, with no rotor mount, is made for 20mm axles. These are redesigned, lightweight, race-focused BMX hubs. We maintain stiffness and weight with a one-piece hardened alloy axle. These hubs feature optimized flange diameter and flange angles for 20" rims, and the same large diameter bearings as our MTB hubs for improved speed and durability.
- Engineered, manufactured and assembled in Portland, Oregon, USA
- King Lifetime Warranty
- Wide flange placement
- Fits 100x20mm BMX axles
- Legendary made-in-house LD bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our Universal Hub Service Tool
- Responsibly lightweight
The 36-hole front, with no rotor mount, is made for 20mm axles. These are redesigned, lightweight, race-focused BMX hubs. We maintain stiffness and weight with a one-piece hardened alloy axle. These hubs feature optimized flange diameter and flange angles for 20" rims, and the same large diameter bearings as our MTB hubs for improved speed and durability.
- Engineered, manufactured and assembled in Portland, Oregon, USA
- King Lifetime Warranty
- Wide flange placement
- Fits 100x20mm BMX axles
- Legendary made-in-house LD bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our Universal Hub Service Tool
- Responsibly lightweight
The 36-hole front, with no rotor mount, is made for 20mm axles. These are redesigned, lightweight, race-focused BMX hubs. We maintain stiffness and weight with a one-piece hardened alloy axle. These hubs feature optimized flange diameter and flange angles for 20" rims, and the same large diameter bearings as our MTB hubs for improved speed and durability.
- Engineered, manufactured and assembled in Portland, Oregon, USA
- King Lifetime Warranty
- Wide flange placement
- Fits 100x20mm BMX axles
- Legendary made-in-house LD bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our Universal Hub Service Tool
- Responsibly lightweight
The 36-hole front, with no rotor mount, is made for 20mm axles. These are redesigned, lightweight, race-focused BMX hubs. We maintain stiffness and weight with a one-piece hardened alloy axle. These hubs feature optimized flange diameter and flange angles for 20" rims, and the same large diameter bearings as our MTB hubs for improved speed and durability.
- Engineered, manufactured and assembled in Portland, Oregon, USA
- King Lifetime Warranty
- Wide flange placement
- Fits 100x20mm BMX axles
- Legendary made-in-house LD bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our Universal Hub Service Tool
- Responsibly lightweight
The 36-hole front, with no rotor mount, is made for 20mm axles. These are redesigned, lightweight, race-focused BMX hubs. We maintain stiffness and weight with a one-piece hardened alloy axle. These hubs feature optimized flange diameter and flange angles for 20" rims, and the same large diameter bearings as our MTB hubs for improved speed and durability.
- Engineered, manufactured and assembled in Portland, Oregon, USA
- King Lifetime Warranty
- Wide flange placement
- Fits 100x20mm BMX axles
- Legendary made-in-house LD bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our Universal Hub Service Tool
- Responsibly lightweight
The 36-hole front, with no rotor mount, is made for 20mm axles. These are redesigned, lightweight, race-focused BMX hubs. We maintain stiffness and weight with a one-piece hardened alloy axle. These hubs feature optimized flange diameter and flange angles for 20" rims, and the same large diameter bearings as our MTB hubs for improved speed and durability.
- Engineered, manufactured and assembled in Portland, Oregon, USA
- King Lifetime Warranty
- Wide flange placement
- Fits 100x20mm BMX axles
- Legendary made-in-house LD bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our Universal Hub Service Tool
- Responsibly lightweight
The 36-hole front, with no rotor mount, is made for 20mm axles. These are redesigned, lightweight, race-focused BMX hubs. We maintain stiffness and weight with a one-piece hardened alloy axle. These hubs feature optimized flange diameter and flange angles for 20" rims, and the same large diameter bearings as our MTB hubs for improved speed and durability.
- Engineered, manufactured and assembled in Portland, Oregon, USA
- King Lifetime Warranty
- Wide flange placement
- Fits 100x20mm BMX axles
- Legendary made-in-house LD bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our Universal Hub Service Tool
- Responsibly lightweight
The 36-hole front, with no rotor mount, is made for 20mm axles. These are redesigned, lightweight, race-focused BMX hubs. We maintain stiffness and weight with a one-piece hardened alloy axle. These hubs feature optimized flange diameter and flange angles for 20" rims, and the same large diameter bearings as our MTB hubs for improved speed and durability.
- Engineered, manufactured and assembled in Portland, Oregon, USA
- King Lifetime Warranty
- Wide flange placement
- Fits 100x20mm BMX axles
- Legendary made-in-house LD bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our Universal Hub Service Tool
- Responsibly lightweight
The 36-hole front, with no rotor mount, is made for 20mm axles. These are redesigned, lightweight, race-focused BMX hubs. We maintain stiffness and weight with a one-piece hardened alloy axle. These hubs feature optimized flange diameter and flange angles for 20" rims, and the same large diameter bearings as our MTB hubs for improved speed and durability.
- Engineered, manufactured and assembled in Portland, Oregon, USA
- King Lifetime Warranty
- Wide flange placement
- Fits 100x20mm BMX axles
- Legendary made-in-house LD bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our Universal Hub Service Tool
- Responsibly lightweight
The 36-hole front, with no rotor mount, is made for 20mm axles. These are redesigned, lightweight, race-focused BMX hubs. We maintain stiffness and weight with a one-piece hardened alloy axle. These hubs feature optimized flange diameter and flange angles for 20" rims, and the same large diameter bearings as our MTB hubs for improved speed and durability.
- Engineered, manufactured and assembled in Portland, Oregon, USA
- King Lifetime Warranty
- Wide flange placement
- Fits 100x20mm BMX axles
- Legendary made-in-house LD bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our Universal Hub Service Tool
- Responsibly lightweight
Webshops and Bike shops
Related Products
-
Description
Chris King Boost Centerlock 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals, and a threaded driveshell seal ring.
Our bearings have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing races break in they get faster with age. All our hubs and bearings are fully serviceable for years upon years of demanding use.
The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Canted flanges for stronger wheel builds
- Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
- Legendary made-in-house bearings
- Available with Micro Spline, HG or XD driveshell
- Easily serviceable with a T10 Torx and pick or pen knife
- Specifically designed for "BOOST" 148mm x 12mm axle standard -
Description
Chris King Boost 6-Bolt 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost 6-Bolt hubs have heavy-duty bearing seals, and a threaded driveshell seal ring.
Our bearings, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Canted flanges for stronger wheel builds
- Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
- Legendary made-in-house bearings
- Available with Micro Spline, HG or XD driveshell.
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with the ISO Hub Service Tool
- Responsibly lightweight
- Specifically designed for "BOOST" 148mm x 12mm axle standard -
Description
The High Flange Rear is a single speed hub with large diameter flanges.
- Flanges have six window cutouts in them to save weight and draw on the influence of classic track hubs.
- 7075 aluminum axle, which has a great strength to weight ratio.
- Axle ends are threaded to receive Paul stainless steel axle bolts.
- Outer lock nut faces are made of knurled steel for a solid grip against dropouts. -
Description
The 36-hole front, with no rotor mount, is made for 20mm axles. These are redesigned, lightweight, race-focused BMX hubs. We maintain stiffness and weight with a one-piece hardened alloy axle. These hubs feature optimized flange diameter and flange angles for 20" rims, and the same large diameter bearings as our MTB hubs for improved speed and durability.
- Engineered, manufactured and assembled in Portland, Oregon, USA
- King Lifetime Warranty
- Wide flange placement
- Fits 100x20mm BMX axles
- Legendary made-in-house LD bearings
- Easily serviceable with a 2.5mm hex and pick or pen knife
- Completely re-buildable with our Universal Hub Service Tool
- Responsibly lightweight -
Description
These are redesigned, lightweight, race-focused, BMX disc hubs. The 36-hole rear has a 6-bolt rotor mount, and incorporates the legendary King RingDrive with internal needle bearing, just like the King BMX hubs of yore. The rear hub is available for 15mm thru-axle or M10 bolt-on. The rear hub comes stock with our 72T RingDrive for quickest engagement but is also compatible with our 36T RingDrive for lower drag and higher maximum speed.
We maintain stiffness with a one-piece hardened stainless steel axle. These hubs feature optimized flange diameter and flange angles for 20" rims. The bolt-on version of the rear hub comes with steel bolts. Ti bolts for this hub are also available in the King webstore.
- Engineered, manufactured and assembled in Portland, Oregon, USA
- King Lifetime Warranty
- Canted flanges for stronger wheel builds
- Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement
- Legendary made-in-house bearings
- 36-hole drilling
- Easily serviceable with a T10 and pick or pen knife
- Completely rebuildable with our Universal Hub Service Tool
- Responsibly lightweight
- Ceramic bearing upgrade available
- Specifically designed for BMX 15x110mm thru axle and M10 bolt-on standards
