Juice Lubes Sponge Job Clean Parts
Description
- Suitable for use on all types of bike. Road, Cyclocross, MTB, Commuter
- Incredibly durable – won’t tear or fall to bits if snagged like conventional sponges.
- Super absorbent.
- Fine pores to be very soft.
- Kind on paint due to low dirt retention.
- Sponge is ideal for General cleaning – Cloth for hard to reach areas.
- Resistant to Bike Cleaner and other chemicals or cleaning agents.
- High tensile strength.
- Oil and general grime can be easily washed out with a quick squirt of Dirt Juice Bike Cleaner and a rinse with fresh water.
- Reduces cleaning time.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-TOOL-BUSH
Easy-to-use tool removes and installs replacement bushings in suspension and shock pivots.
Includes retaining tool, top cap and all three eyelet "slammers".
Fits eyelet sizes - 10mm, 12mm and 1/2".
Machined aluminum$67.00 (RRP) -
Stock Code:WMTL-ST0006
An evolution of our original bushing toolset which required the use of a hammer to pound out shock bushings. The new design uses our threaded handle press system to easily and efficiently remove shock bushing in 12mm and 1/2 inch sizes.
Fits 12mm and 1/2" bushings.
Machined aluminum$199.00 (RRP)Add To Cart
-
Stock Code:WTTL-BBS4116Stock Code:WTTL-BBS4416Stock Code:WTTL-BBS4612Stock Code:WTTL-BBS4816
BBS4116: 16 notch BB socket for 41mm diameter notch pattern, Shimano 105, Ultegra BBR60 and 6800, XT MT-800
Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with 7075-T6 aluminum.
- Large finger notches so you can start threading the cups by hand
- 3/8" square socket or 1" hex for ratchet/torque wrench
- Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets
- Steel inserts for magnetic coupling compatibility with the Pack Wrench$70.00 (RRP)$70.00 (RRP)$70.00 (RRP)$70.00 (RRP) -
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP)
