Juice Lubes Double ender Two Prong Brush
Description
The Double Ender brush is a flexible, stiff and double-pronged brush that'll leave your dirty bits gleaming.
It comes with a tough rubber handle and hard-wearing bristles for anything that’s filthy enough to need a proper scrubbing. It's built to be stiff enough to really take some welly but flexible enough to reach those tricky spots.
As with all things, go steady. Excessive rubbing or pressure won’t do any good and could lead to surface scratching. For really sensitive bits, we’d recommend a sponge or microfibre cloth.
- Removes dirt from hard to reach areas
- Adjustable prongs
- Hard wearing nylon bristles
- Tough impact resistant rubberized handle and impact zones
- Ideal for linkages, discs, shocks, pedals, chainstays, spokes etc
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WTTL-BBS4116Stock Code:WTTL-BBS4416Stock Code:WTTL-BBS4612Stock Code:WTTL-BBS4816
BBS4116: 16 notch BB socket for 41mm diameter notch pattern, Shimano 105, Ultegra BBR60 and 6800, XT MT-800
Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with 7075-T6 aluminum.
- Large finger notches so you can start threading the cups by hand
- 3/8" square socket or 1" hex for ratchet/torque wrench
- Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets
- Steel inserts for magnetic coupling compatibility with the Pack Wrench$70.00 (RRP)$70.00 (RRP)$70.00 (RRP)$70.00 (RRP) -
Stock Code:WTTL-BBS4116Stock Code:WTTL-BBS4416Stock Code:WTTL-BBS4612Stock Code:WTTL-BBS4816
BBS4116: 16 notch BB socket for 41mm diameter notch pattern, Shimano 105, Ultegra BBR60 and 6800, XT MT-800
Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with 7075-T6 aluminum.
- Large finger notches so you can start threading the cups by hand
- 3/8" square socket or 1" hex for ratchet/torque wrench
- Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets
- Steel inserts for magnetic coupling compatibility with the Pack Wrench$70.00 (RRP)$70.00 (RRP)$70.00 (RRP)$70.00 (RRP) -
Stock Code:WMTL-XTR-CAP-DRIVER
The XTR Cap Driver is used for removing and installing the fixing bolt cap on XTR M9100 series crankarms. Designed to be used with a 3/8” drive socket or torque wrench for easy installation and removal.
$30.00 (RRP) -
Stock Code:WMTL-SS-30Stock Code:WMTL-SS-15-25Stock Code:WMTL-SS-17-25Stock Code:WMTL-SS-17-35
Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up. 15mm thru hole size makes this perfect for use on hubs with larger axles.
Compatible with:
PRESS-4 - Economy Press
PRESS-1 - Large Sealed Bearing Press
PRESS-1 Handle & Rod Assembly
Length: 25mm
OD: 23.8mm
ID: 15.1mm
Machined Aluminum
*Sold individually$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)
