PROBLEM SOLVERS BRAZE ON ADAPTERS
Problem Solvers Braze-on Adaptor Clamp 28.6mm Slotted Silver
These adapters clamp on to the seat tube so you can use your braze-on derailleur on a conventional frame.
Available in black and silver in 28.6, 31.8 & 34.9mm diameters.
Problem Solvers Braze-on Adaptor Clamp 31.8mm Slotted Silver
Problem Solvers Braze-on Adaptor Clamp 31.8mm Slotted Black
These adapters clamp on to the seat tube so you can use your braze-on derailleur on a conventional frame.
Problem Solvers Braze-on Adaptor Clamp 34.9mm Slotted Black
Webshops and Bike shops
Related Products
-
Description
These adapters clamp on to the seat tube so you can use your braze-on derailleur on a conventional frame.
POA -
Description
· Works for Shimano and SRAM High Direct Mount front derailleurs
· 34.9mm Clamp with shims for 31.8 & 28.6
· 55mm offset for Surly MoonlanderPOA -
Description
Old road frames with a braze-on derailleur mount were designed for large road rings. They aren't compatible with sub-compact chainrings
This adapter for the frame front derailleur braze-on allows you to mount your derailleur lower to get it to work with smaller chainrings.Expected Date:06 June 2024 -
Description
ShiftMounts are adapter mounts which allows you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura. Handlebar space is prime real-estate and this ShiftMount integrates seamlessly for a clean look.
Mount Type
ShiftMount naming convention is [shifter type - brake type]
MM-ISII is for a SRAM Matchmaker shifter mounting to a Shimano I-Spec II brake
MM-ISEV is for a SRAM Matchmaker shifter mounting to a Shimano I-Spec EV brake
ISEV-ISB is for a Shimano I-Spec EV shifter mounting to a Shimano I-Spec B brake
ISEV-ISII is for a Shimano I-Spec EV shifter mounting to a Shimano I-Spec II brake
MM-MAG is for a SRAM Matchmaker shifter mounting to a Magura brake
Compatibility
Designed to work with rear (right side) brakes and shifters.
Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters.
MM-ISEV, MM-ISII, & MM-MAG is compatible with but not designed for SRAM AXS. With SRAM AXS the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders.
Shimano I-spec A, Hope, and TRP brakes are not supported.
Shimano I-spec EV to Magura brakes is not supported because of geometric challenges. -
Description
MM-31.8 Clamp is for a SRAM MatchMaker shifter mounting directly to a 31.8 mm diameter road handlebar.
