WolfTooth 6Bit Hex Multi Keychain Orange
Description
The new Wolf Tooth 6-Bit Hex Wrench is a slim, strong multi-tool with 11 functions for common bike repairs and everyday needs. Six hex bits are stored inside the handles that fit into the end of a ball detent swivel head for use. The 11 functions include: 2, 2.5, 3, 4, 5, 6, and 8mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible bits. All bits are ED-coated and corrosion-resistant. It is small enough to fit into a riding tool wrap or pocket, and has an optional keyring attachment to fit on any keychain for use away from the bike.
The keyring attachment is an option for those who like to have a multi-tool on or off the bike for everyday-carry needs. The 6-Bit Hex Bit Wrench is locked shut while the keyring is attached. This prevents it from opening while you’re on the go. Then when you need to use the multi-tool, press the end of the keyring attachment to detach it from your keyring. When you’re done using it, close the handles and click it back onto the keyring attachment to lock it shut once again. The handles also have a magnetic closure to keep it closed when the keyring attachment is not connected.
• All bits are ED-coated and corrosion-resistant
• Magnets keep all bits in place and secure
• Ball detent swivel head tested to over 40Nm of torque
• Same bits as 8-Bit System and EnCase System multi-tools
• Optional ball detent keychain locks multi-tool closed
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Stock Level:In StockStock Level:1Stock Level:In StockStock Level:1Stock Level:2Stock Level:2Stock Level:2Stock Level:2Stock Level:2Stock Level:1Stock Level:Out of StockStock Level:In StockStock Level:In Stock$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP) -
Stock Code:WTTL-8BIT-BLK-RED
The 8-Bit Pack Pliers is a lightweight multi-tool with 17 functions. Eight attachments nest inside the handles of master link pliers using magnets and a clever storage system. These attachments then fit into an 8mm ball detent swivel head that has a 4mm opening for hex bits, which adds functionality to the already-versatile master link pliers. This new multi-tool was created to solve almost any minor repair on MTB and road rides alike.
- 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut
- Magnets keep all bits in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar for extra torque when head is bent
- 8mm hex bit tested to over 40 Nm torque
Compatibility
- Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
- Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)Stock Level:In StockStock Level:In Stock$136.50 (RRP)Add To Cart
-
Stock Code:WMTL-BP0005
Essential Bearing Press for installation of bearings with a minimum inner diameter of 10mm For use with 3/8" Press Rod and handles.
Includes:
- QTY 1 3/8 ACME THREADED ROD
- QTY 2 FAME LINKAGE STANDOFF 30mm QTY
- 2 THREADED HANDLEStock Level:In StockStock Level:In Stock$157.50 (RRP)Add To Cart
-
Stock Code:WTTL-6-BIT-KR-RED
The new Wolf Tooth 6-Bit Hex Wrench is a slim, strong multi-tool with 11 functions for common bike repairs and everyday needs. Six hex bits are stored inside the handles that fit into the end of a ball detent swivel head for use. The 11 functions include: 2, 2.5, 3, 4, 5, 6, and 8mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible bits. All bits are ED-coated and corrosion-resistant. It is small enough to fit into a riding tool wrap or pocket, and has an optional keyring attachment to fit on any keychain for use away from the bike.
The keyring attachment is an option for those who like to have a multi-tool on or off the bike for everyday-carry needs. The 6-Bit Hex Bit Wrench is locked shut while the keyring is attached. This prevents it from opening while you’re on the go. Then when you need to use the multi-tool, press the end of the keyring attachment to detach it from your keyring. When you’re done using it, close the handles and click it back onto the keyring attachment to lock it shut once again. The handles also have a magnetic closure to keep it closed when the keyring attachment is not connected.
• All bits are ED-coated and corrosion-resistant
• Magnets keep all bits in place and secure
• Ball detent swivel head tested to over 40Nm of torque
• Same bits as 8-Bit System and EnCase System multi-tools
• Optional ball detent keychain locks multi-tool closedStock Level:2Stock Level:2$99.00 (RRP)Add To Cart
-
Stock Code:WMTL-29MM-EXT
Individual extractor for removing 6806 sealed bearings with 29mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.Stock Level:In StockStock Level:In Stock$85.00 (RRP)Add To Cart