SURLY HURDY GURDY
· Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load
· Designed for Surly Cross-Check’s semi-horizontal front-loading dropouts, and will also work on many other similar dropouts
· Investment cast of stainless steel for durability and good looks
Webshops and Bike shops
Related Products
-
Description
We decided to design a chain tensioner that will keep that rear wheel static in our dropouts...and most other kinds of rear-facing horizontal dropouts. Plus, ours will open up a bottle o' brew. The body of the Tuggnut is investment cast in stainless steel for durability. It features a thumbscrew, for tool-free adjustments, and 2 axle holes for a wide range of fore/aft wheel positions. The Tuggnut comes with an aluminum adapter that reduces the axle hole from 10mm to 6mm, so you can use it with quick-release axles, in addition to nutted axles. We sell it as a single, because you really only need one...on the drive side. But, if you absolutely need one on the non-drive side of your rig, to achieve balance in your life, you are in luck...the bottle opener works either way.
Expected Date:06 June 2024POA -
Description
The 104 BCD bashring can be added to the crankset to protect a 104 or 64 BCD chainring.
- Properly sized to fit 104 or 64 BCD chainring
- Two sizes for ultimate protection: smaller 26-30t (132 mm diameter) and mid-sized 32t-34t (148 mm diameter).
Compatibility
These are for use with 104 BCD chainrings or 64 BCD chainrings on 104 BCD cranksets
These are compatible with all triple 104 BCD cranksets and mount in the “big ring” position
They are compatible with double cranksets that have flat outfacing mounting tabs, like XTR M980. However, many 2x specific cranks, like Shimano XT M785, have a profiled outer surface on the mounting tab so our bashring cannot be mounted on that non-flat surface.
These work great with the 104 BCD Elliptical 32t ring. They will work with the 34t as well, but at the max diameter a few teeth will extend just beyond the bashring.
Chainring bolt requirements for this bashring
104 x 30t - 10mm bolts are required for use with the bashring.
Other 104 BCD sizes - you will need 8mm bolts (stock size that comes on 3x cranksets holding the middle and big rings on). Wolf Tooth does not make these.
When using with the 64 BCD you will need 6mm bolts to mount the bashring. Note: Orient the head of the bolt to the inside to provide clearance for the chain (bolts will go in backwards). -
Description
Our 96 BCD bash ring is one of the few available for the Shimano compact triple cranksets. If you like the rough stuff, log hopping, bouldering on your bike or occasionally like to see if you can break your bike on the gnarlies, at least protect that beautiful Wolf Tooth 96 BCD ring. For use with 30-34t chanirings, bash diameter is 148 mm.
Compatibility
These rings fit any 96 symmetric BCD crankset
Compatible crankset models: M782, M672, M622, M612
Fits with the Drop Stop® 30t, 32t & 34t Wolf Tooth chainrings.
10mm bolts are required for mounting this bashring with our chainring -
Description
The new LoneWolf Aero Chainguide prevents dropped chains on road, gravel, and CX bikes with 1x drivetrains. This chainguide has been tested and developed with Team Jumbo-Visma, has been trusted in road cycling’s biggest races, and ridden to victory in the 2023 Giro d'Italia. LoneWolf Aero Chainguide was also ridden to victory through truly epic conditions at Unbound Gravel 2023.
We think of this little chainguide as 30g of insurance for races where a dropped chain could cost you a shot at the podium. The LoneWolf Aero Chainguide is similar to our existing GnarWolf, and combines a low profile head that only covers the top and inboard side of the chain with our GuideLock quick adjustment system. This eliminates the need for shims and gives you security in a light, easy to use, and aerodynamically optimized chainguide solution.
• Compatible with bikes that have a braze-on front derailleur mount
• Only for use with 1x drivetrains
• Works with round or oval chainrings
• Three base sweep options for chainring sizes ranging from roughly 38T-62T based on frame; Low sweep for smaller chainrings in that range will be most popular
• Head has 8mm of adjustment for chainline via our GuideLock quick adjustment system -
Description
The new LoneWolf Aero Chainguide prevents dropped chains on road, gravel, and CX bikes with 1x drivetrains. This chainguide has been tested and developed with Team Jumbo-Visma, has been trusted in road cycling’s biggest races, and ridden to victory in the 2023 Giro d'Italia. LoneWolf Aero Chainguide was also ridden to victory through truly epic conditions at Unbound Gravel 2023.
We think of this little chainguide as 30g of insurance for races where a dropped chain could cost you a shot at the podium. The LoneWolf Aero Chainguide is similar to our existing GnarWolf, and combines a low profile head that only covers the top and inboard side of the chain with our GuideLock quick adjustment system. This eliminates the need for shims and gives you security in a light, easy to use, and aerodynamically optimized chainguide solution.
• Compatible with bikes that have a braze-on front derailleur mount
• Only for use with 1x drivetrains
• Works with round or oval chainrings
• Three base sweep options for chainring sizes ranging from roughly 38T-62T based on frame; Low sweep for smaller chainrings in that range will be most popular
• Head has 8mm of adjustment for chainline via our GuideLock quick adjustment system
