Chris King
-
Stock Code:CKWA-PHB786B-HG
Convert your ISO B hub to Shimano HG. Conversion kit is complete with axle, adjustment clamp, driveshell and all driveshell internals for a plug and play swap.
$508.55 (RRP)Add To Cart
-
Stock Code:CKWA-PHB786B
Convert your ISO B rear hub to our updated twin-bearing axle and driveshell. Conversion kits come complete with 148x12mm axle, adjustment clamp, and driver. Driveshell internals are pre-installed for a hassle free swap.
- Compatible with ISO B rear hubs - serial numbers start with 851.
- Requires a 2.5mm hex bit for installation.$508.55 (RRP)Add To Cart
-
Stock Code:CKWA-PHB816B
Convert your ISO B rear hub to our updated CERAMIC twin-bearing axle and driveshell. Conversion kits come complete with 148x12mm axle, adjustment clamp, and driver.
Driveshell internals are pre-installed for a hassle free swap.
Compatible with ISO B rear hubs - serial numbers start with 851.
Requires a 2.5mm hex bit for installation.$695.00 (RRP)Add To Cart
-
Stock Code:CKBG-PHB516Stock Code:CKBG-PHB517Stock Code:CKBG-PHB518Stock Code:CKBG-PHB515Stock Code:CKBG-PHB700Stock Code:CKBG-PHB343
CHRIS KING ISO MTB HUB BEARINGS
This bearing is designed for use only on Chris King second generation Front 15mmLD and 20mm hubs with a serial number that starts with 172.$82.29 (RRP)$82.29 (RRP)$75.82 (RRP)$100.39 (RRP)$82.29 (RRP)$75.71 (RRP) -
Stock Code:CKTL-THB020
Chris King Large Split Ring tool for 20mm Hubs
Split ring for the THB001 Hub Service Tool which is compatible with all Chris King hubs except the R45.
This anodized red large Split Ring replaces the pewter large Split Ring. It allows users to remove the bearings in the Chris King LD (15mmLD and 20mm) front hubs.$46.13 (RRP)Add To Cart
-
Stock Code:CKSC-PHS213J
Chris King headsets spacers are turned from solid bar-stock to ensure precise and parallel surfaces and guarantee proper headset preload. And they look great too.
Kits include a 3mm, 2x6mm, and 2x12mm, spacers.Expected Date:06 June 2024$89.00 (RRP) -
Stock Code:CKSC-PHS213H
Chris King headsets spacers are turned from solid bar-stock to ensure precise and parallel surfaces.
Kits include a 3mm, 6mm, 12mm, and 25mm spacer.$89.00 (RRP) -
Stock Code:CKSC-PHS213W
Chris King headsets spacers are turned from solid bar-stock to ensure precise and parallel surfaces.
Kits include a 3mm, 6mm, 12mm, and 25mm spacer.$89.00 (RRP)Add To Cart
-
Stock Code:CKSC-PHS213Q
Chris King headsets spacers are turned from solid bar-stock to ensure precise and parallel surfaces.
Kits include a 3mm, 6mm, 12mm, and 25mm spacer.$89.00 (RRP)Add To Cart
-
Stock Code:CKSC-PHS217Z
Chris King headsets spacers are turned from solid bar-stock to ensure precise and parallel surfaces and guarantee proper headset preload. And they look great too.
Kits include a 3mm, 2x6mm, and 2x12mm, spacers.$89.00 (RRP)Add To Cart
-
Stock Code:CKWL-WB282923
* COMES WITH MATTE BLACK (JET) HUBS NOT TURQUOISE AS IN THE PICTURE
The MTN30 wheel tracks better in hard corners and is more stable at high-speeds due to the dynamic compliance provided by FusionFiberTM a ground breaking thermoplastic alternative to traditional carbon fiber. This is a versatile wheel for riders who ride every kind of terrain.
We paired the MTN30 with our Boost Centerlock hubs and their 72-points of simultaneous engagement. That makes these wheels super efficient at transferring your power to the ground. We throw in one-piece solid axles to provide a stiff hub with rail accurate steering. So you’ve got a light, comfort-oriented, high performance wheelset that will accommodate a lot of tires. It’s really a tremendous value for the rider who just wants to ride bikes all day. That sounds like you.
Finally, our bearings, have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use.
This wheelset comes with the legendary angry-bee sound and you can choose from a bunch of sharp hub colors, including basic black.
- Built in-house with legendary Chris King precision
- Chris King Boost Centerlock 28-hole front hub
- Chris King Boost Centerlock 28-hole rear hub
- Tape and Valve Kit included with this wheelset
- King Lifetime Warranty$3,800.00 (RRP)Add To Cart
-
Stock Code:CKSC-PHS212N$89.00 (RRP)
Add To Cart
-
Stock Code:CKSC-PHS213N
Chris King Navy 1-1/8" Spacer Kit (1 each of 3mm, 6mm, 12mm, 25mm)
$89.00 (RRP)Add To Cart
-
Stock Code:CKBB-108-FN0108
Chris King CERAMIC Road Bottom Bracket Shim/Xtype/FSA (use mtb BB for FSA road Lite cranks ) 24mm spindle
The construction and compatibility of this Chris King® Ceramic Bearing Bottom Bracket are identical to the Chris King® stainless steel bearing bottom bracket. However, this bottom bracket uses ceramic balls, which are lighter, harder and have greater roundness than stainless steel balls, resulting in a bearing with less friction and exceptional speed and strength.
These factors along with Chris King's sealing system mean you need only use a very small amount of low-viscosity lube in the bearing. This means less drag in the bearing, allowing you to pedal with greater efficiency.
•Designed for Shimano™-compatible external type crank systems including Shimano™ Hollowtech II™, Race Face X-Type™, and FSA MegaExo™
•24 ball bearings per side
• Fully user-serviceable bearings$357.12 (RRP) -
Stock Code:CKHS-BGB1Stock Code:CKHS-BGB3Stock Code:CKHS-BGS3
Chris King NoThreadSet 1" Bold Laser mark griplock
- For 30.1mm ID headtube
- 26.4mm Crown RaceExpected Date:06 June 2024Expected Date:06 June 2024$330.00 (RRP)$330.00 (RRP)$330.00 (RRP) -
Stock Code:CKHS-BHB1Stock Code:CKHS-BHB2Stock Code:CKHS-BHB3Stock Code:CKHS-BHR1Stock Code:CKHS-BHS3Stock Code:CKHS-BHBY
The NoThreadSet™ is built to be precise and dependable and sets the standard for quality headset function delivering precision performance to numerous world champions, grand tour winners, and aspiring riders around the world.
- Fits 34mm headtube
- Engineered, manufactured and assembled in Portland, Oregon USA
- 10-year built-to-last warranty
- Legendary made-in-house bearings
- Patented GripLock® retention design for exclusively reliable headset adjustment (1-1/8” only)
- Available in 9 beautifully anodized colors in both bold and sotto voce marking options
- Responsibly lightweightExpected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP) -
Stock Code:CKHS-15-HSE1BStock Code:CKHS-15-HSE1LStock Code:CKHS-15-HSE1MStock Code:CKHS-15-HSE1NStock Code:CKHS-15-HSE1RStock Code:CKHS-15-HSE1SStock Code:CKHS-15-HSE1YStock Code:CKHS-15-HSF1B$312.07 (RRP)$312.07 (RRP)$312.07 (RRP)$312.07 (RRP)$312.07 (RRP)$312.07 (RRP)$312.07 (RRP)$312.07 (RRP)
-
Stock Code:CKHS-BJB1
Our 34mm/44mm NoThreadSet™ provides Chris King precision function in a design that brings Chris King’s legendary headset precision to a new crop of tapered headtubes using tapered forks and external upper and lower cups
- Lifetime warranty
- Legendary made-in-house bearings
- Patented GripLock® retention design for exclusively reliable headset adjustment (1-1/8” only)
- Built to accomodate 1-1/8” to 1-1/4” tapered steerer tubes$330.00 (RRP)Add To Cart
-
Stock Code:CKHS-BKB1
Our 34mm/44mm NoThreadSet™ provides Chris King precision function in a design that brings Chris King’s legendary headset precision to a new crop of tapered headtubes using tapered forks and external upper and lower cups
- King Lifetime Warranty
- Legendary made-in-house bearings
- Patented GripLock® retention design for exclusively reliable headset adjustment (1-1/8” only)
- Built to accomodate 1-1/8” to 1.5” tapered steerer tubes$330.00 (RRP) -
Stock Code:CKHS-85-FB0085
Chris King NoThreadSet Tapered 34/49mm Headtube (1-1/8"/1.5" tapered fork) Griplock Bold Logo
$295.06 (RRP) -
Stock Code:CKHS-1418-HSM1B
Chris King NoThreadSet Black Devolution 1-1/4" > 1-1/8" Soto Voco (fits 1-1/4" (36.9mm) frame for 1-1/8" fork)
$293.10 (RRP) -
Stock Code:CKHS-PHS016-BLKStock Code:CKHS-PHS022BStock Code:CKHS-PHS601B
Chris King No ThreadSet Headset Conversion Kit - 1 inch - Black
This factory Conversion Kit contains everything you'll need to convert your Chris King GripNut or 2Nut into a NoThreadSet with no compromises.
Contains:
Headset Stem Bolt
Scuff washer
Star Nut
Bearing cap
Stem cap$77.58 (RRP)$98.28 (RRP)$98.28 (RRP) -
Stock Code:CKHS-47-FG0047Stock Code:CKHS-47-FL0047Stock Code:CKHS-47-FM0047Stock Code:CKHS-47-FN0047Stock Code:CKHS-47-FR0047Stock Code:CKHS-47-FS0047Stock Code:CKHS-47-FY0047
Chris King NoThreadSet Green Tapered 34/49mm Headtube (1-1/8"/1.5" tapered fork) Griplock Sotto Voce
$293.10 (RRP)$293.10 (RRP)$293.10 (RRP)$293.10 (RRP)$293.10 (RRP)$293.10 (RRP)$293.10 (RRP) -
Stock Code:CKHS-49-FN0049Stock Code:CKHS-49-FR0049Stock Code:CKHS-49-FS0049Stock Code:CKHS-49-FY0049
Chris King NoThreadSet Navy Devolution 1.5">1-1/8" Sotto Vocce Fits 1.5" (49mm) frame 1-1/8" Fork Steerer
$312.07 (RRP)$312.07 (RRP)$312.07 (RRP)$312.07 (RRP)