Wolf Tooth Bottle Opener RotorTruing Ora
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-BR-3
Updated for 2020!
Wheels Mfg Derailleur Hanger wall chart shows every hanger we currently produce. In order from DROPOUT-1 to DROPOUT-342. Use as a visual reference to quickly compare damaged hangers against ours.
- 24" wide x 36" high
- Printed on one side only$6.71 (RRP)Add To Cart
-
Stock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Our 2437 open bore adapter is used to press 24x37 sealed bearings in to Shimano compatible bottom bracket cups, and direct fit frames like Trek BB90. The adapter is machined with one step at 24mm OD, which fits in to the center of the sealed bearing.
Use with 24x37x7 bearing
Outer Diameter: 37mm
Inner Step Diameter: 24mm
Inner hole sized to fit 3/8" threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, anodized gray aluminum
Sold individually$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP) -
Stock Code:WTTL-8-BIT-LEVER-BRAKE
The 8-Bit Tire Lever + Disc Brake Multi-tool has two functions. A double-sided multi-tool with a tire lever on one end and disc brake support on the other. The high-strength plastic lever easily removes tires without damaging the rim. On the machined end of the multi-tool, an 8mm flare wrench can open and close the compression nut on hydraulic brakes and there is a slot for truing rotors.
• Tapered, angled tip to fit under tight tires
• Rounded edges prevent damage to rim and rim tape
• Extra-long lever fits nicely in hand and provides additional leverage
• 147mm length$47.25 (RRP)Add To Cart
-
Stock Code:WTTL-6-BIT-KR-GRY
The keyring attachment is an option for those who like to have a multi-tool on or off the bike for everyday-carry needs. The 6-Bit Hex Bit Wrench is locked shut while the keyring is attached. This prevents it from opening while you’re on the go. Then when you need to use the multi-tool, press the end of the keyring attachment to detach it from your keyring. When you’re done using it, close the handles and click it back onto the keyring attachment to lock it shut once again. The handles also have a magnetic closure to keep it closed when the keyring attachment is not connected.
• All bits are ED-coated and corrosion-resistant
• Magnets keep all bits in place and secure
• Ball detent swivel head tested to over 40Nm of torque
• Same bits as 8-Bit System and EnCase System multi-tools
• Optional ball detent keychain locks multi-tool closed$99.00 (RRP)Add To Cart
-
Stock Code:BBTL-TO-TOOLHEADSET
This stainless steel tool is used to measure the angle of the headset’s bearings
There are 4 measure points: 36° and 45° inside and 36° and 45° outside.$43.74 (RRP)Add To Cart
