Chris King Lrg Split Ring tool for 20mm
Description
Chris King Large Split Ring tool for 20mm Hubs
Split ring for the THB001 Hub Service Tool which is compatible with all Chris King hubs except the R45.
This anodized red large Split Ring replaces the pewter large Split Ring. It allows users to remove the bearings in the Chris King LD (15mmLD and 20mm) front hubs.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKTL-THB002Expected Date:06 June 2024$52.96 (RRP)
-
Stock Code:PSTL-TL1302
For quick and easy wheel building, the Holy Driver sets spoke nipples to the same depth. Simply cut a spoke and fix its length with the set screw.
- Insert a cut spoke into the sleeve to desired depth and lock setscrew with 2mm hex wrench
- Compatible with rims up to 45mm deep
- CroMoly with black oxidized finish$65.57 (RRP)POA -
Stock Code:PSTL-TL1303
Thru-axle hubs just don't fit in the truing stand. Our adapters fit into common thru-axle sizes so you can true them up just like a wheel with a standard hub axle. We've also included o-rings so that the thru-axle caps are guided into the hub for a solid fit and stay secure when you remove the wheel to check your dish and stress-relieve the spokes.
- For9/15/20mm axles (pair)
- Developed in cooperation with Handspun Wheels (www.handspunwheels.com)
- Grooved with rubber o-rings
- CNC-machined AL-6061-T6$86.97 (RRP)POA -
Stock Code:CKTL-THB006
This is a small part of the THB001 Hub Service Tool which is compatible with all Chris King® hubs except the R45, 15mmLD, 20mm and 24mm.
POA -
Stock Code:WMTL-EX0001
These extractors remove sealed bearings with inside diameters from 8,9,10 and12mm.
Bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.
Removes these sealed bearing sizes: 608, 609, 6000, 6001
4-piece set includes:
(1) 8mm ID Bearing Extractor
(1) 9mm ID Bearing Extractor
(1) 10mm ID Bearing Extractor
(1) 12mm ID Bearing Extractor
(1) Spare parts bag
(1) M5 bolt set$199.50 (RRP)Add To Cart
