WOLF TOOTH CAMO STAINLESS STEEL CHAINRINGS
Webshops and Bike shops
Related Products
-
Description
Wheels MFG C/ring Mid 2.0mm Spacer (20)
chainring spacer for middle position. Machined to close tolerances out of 6061 aluminum. Excellent for improving chain line, or for replacing missing spacers.
Inner Diameter: 10mm
Thickness: 2.0mm
20/bag -
Description
Enter the Surly Stainless Steel chainring,you can now have an all-steel drivetrain that will love you long time. Stainless, as it’s name implies, is a rust and corrosion-resistant alloy steel that is known for it’s toughness.
- No ramps or shift gates
- use of Surly rings with 9 and 10 speed chains will have a tight fit and require a short break in period
- Chain Compatibility: 3/32"
- Material: 304 Stainless
- Ring Position: Middle , SinglePOA -
Description
Elliptical Direct Mount Chainring for Race Face Cinch Boost / 3mm Offest
Compatibility
- Any Race Face Cinch(TM) system crankset (including Next SL, Sixc, Turbine, Aeffect)
- Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)
- Chainline 49mm (standard), 52mm (Boost) -
Description
Direct Mount Chainrings for Shimano Cranks for Shimano 12spd Hyperglide+ Chain BOOST / 3mm Offset
The Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology.
- The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.
- Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.
- Prevents premature ring and chain wear that can come from non-optimized profiles.
Compatibility
- Shimano XTR M9100, XT M8100, and SLX M7100 series 12 speed cranksets.
- Compatible with Shimano 12-speed Hyperglide+ chains
- Boost crankset, models M9100, M8100, M7100, MT610 - will use a Boost ring with Boost rear hub spacing (148mm) -
Description
Direct Mount Chainrings for SRAM 3-Bolt Cranks BOOST / 3mm Offset Drop-Stop B
Drop-Stop B is optimized for SRAM T-Type Transmission and compatible with many other chains. (They do not work with Shimano 12 speed Hyperglide+ chain)
Compatibility
- Boost: 3mm offset for 52mm chainline or Transmission compatibility with Super Boost bikes
- These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle.
- NOT compatible with SRAM 8-bolt direct mount cranksets.
- Also compatible with Cane Creek eeWings cranksets??
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- There are 3 offsets:
Boost: 0mm offset for 55mm chainline required for SRAM Transmission
Boost: 3mm offset for 52mm chainline or Transmission compatibility with Super Boost bikes
BB30: 0mm offset for BB30 short spindle cranks for 49mm chainline
Standard MTB: 6mm offset for non-Boost mountain bikes, GXP and long spindle BB30 cranks for 49mm chainline
Fat bikes: If your fat bike has a 170/177 rear hub spacing, use the standard 6mm offset
Praxis Works Road/CX cranks use the 6mm offset. Praxis Works mountain cranks use the 3mm offset for their DM-A and 0mm offset for their DM-B chainrings.
