Chris King
-
Stock Code:CKHS-14-HSL1S$252.32 (RRP)
-
Stock Code:CKHS-1181-HSN1S
Chris King NoThreadSet Silver Devolution 1-1/8">1" Sotto Vocce fits 1-1/8" (34mm) frame for 1" fork
$275.86 (RRP) -
Stock Code:CKHS-PHS726
This factory replacement O-Ring fits Chris King® GripLock™ NoThreadSets™ only.
$3.45 (RRP) -
Stock Code:CKWA-PHB557Stock Code:CKWA-PHB559Stock Code:CKWA-PHB558Stock Code:CKWA-PHB556Stock Code:CKWA-PHB580Stock Code:CKWA-PHB708Stock Code:CKWA-PHB708BStock Code:CKWA-PHB571Stock Code:CKWA-PHB505Stock Code:CKWA-PHB506Stock Code:CKWA-PHB544Stock Code:CKWA-PHB525Stock Code:CKWA-PHB545Stock Code:CKWA-PHB508Stock Code:CKWA-PHB510Stock Code:CKWA-PHB581Stock Code:CKWA-PHB536
Select from side bar
Chris King Rear 135x10mm QR ISO Disc hub Axle (classic disc) 1 piece.
DOES NOT INCLUDE QR end caps or fun bolts. These must be purchased separately.
Use PHB705 if QR needed
Use PHB507 for Fun bolts
• Fits Chris King ISO Rear Hubs (not compatible with 150mm, 157mm, BOOST or Singlespeed Hubs).
• Replacement for 2-piece Axle and allows you to change any bolt on axle to a QR Axle.Expected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$61.72 (RRP)$61.72 (RRP)$26.21 (RRP)$32.91 (RRP)$32.91 (RRP)$161.28 (RRP)$153.06 (RRP)$306.11 (RRP)$161.28 (RRP)$286.36 (RRP)$440.00 (RRP)$34.97 (RRP) -
Stock Code:CKWA-PHB502Stock Code:CKWA-PHB504$103.40 (RRP)$32.91 (RRP)
-
Stock Code:CKWA-PHB710Stock Code:CKWA-PHB736Stock Code:CKWA-PHB735BStock Code:CKWA-PHB735Stock Code:CKWA-PHB642Stock Code:CKWA-PHB648Stock Code:CKWA-PHB646Stock Code:CKWA-PHB641Stock Code:CKWA-PHB643Stock Code:CKWA-PHB645Stock Code:CKWA-PHB768Stock Code:CKWA-PHB720Stock Code:CKWA-PHB761Stock Code:CKWA-PHB718Stock Code:CKWA-PHB755Stock Code:CKWA-PHB572Stock Code:CKWA-PHB523Stock Code:CKWA-PHB762Stock Code:CKWA-PHB752Stock Code:CKWA-PHB721Stock Code:CKWA-PHB566Stock Code:CKWA-PHB719Expected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024$61.72 (RRP)$65.00 (RRP)$65.00 (RRP)$65.00 (RRP)$144.83 (RRP)POA$144.83 (RRP)$144.83 (RRP)$144.83 (RRP)$144.83 (RRP)$37.85 (RRP)$28.21 (RRP)$161.28 (RRP)$153.06 (RRP)$41.14 (RRP)POA$8.55 (RRP)$161.28 (RRP)$41.14 (RRP)$39.77 (RRP)$29.75 (RRP)$23.51 (RRP)
-
Stock Code:CKBG-PHB723Stock Code:CKBG-PHB730Stock Code:CKBG-PHB758Stock Code:CKBG-PHB716Stock Code:CKBG-PHB731Stock Code:CKBG-PHB713Stock Code:CKBG-PHB729Stock Code:CKBG-PHB715Stock Code:CKBG-PHB732Stock Code:CKBG-PHB714
Chris King bearing PHB713:
- R45 Front Hubshell
- R45D C/L and BOOST C/L Hubshell Front and small non-driveside RearExpected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024$82.29 (RRP)$161.28 (RRP)$82.29 (RRP)$82.29 (RRP)$161.28 (RRP)$75.71 (RRP)$153.06 (RRP)$82.29 (RRP)$161.28 (RRP)$82.29 (RRP) -
Stock Code:CKWA-PHB575
R45D 12mm Axle End Cap - Non Drive Side
Drive Side uses PHB571Expected Date:06 June 2024$21.63 (RRP) -
Stock Code:CKWH-2FB1146Stock Code:CKWH-2FB1064Stock Code:CKWH-2FB1321
Our high performance R45 Disc hubs are built to meet the requirements of the world’s most demanding road and cyclocross riders with the long-term performance, durability, and serviceability that you expect from Chris King components. We equip our R45 Discs with the same race proven 45 point RingDrive engagement system and exceedingly smooth in-house made bearings.
These hubs feature an exquisitely machined 6-bolt disc mount that melds current disc mount specifications with elegant design for a beautiful finish and seamless integration. The front hub retains traditional 100mm spacing while the rear hub is designed around 135mm spacing, which has been established as the industry standard for disc compatible road and cyclocross bicycles.Was:$878.84 (RRP)Now:$275.00 (RRP)Price:$275.00 (RRP)POA$742.23 (RRP) -
Stock Code:CKWH-3FT1278Stock Code:CKWH-3FS1278Stock Code:CKWH-EAB2AA1Stock Code:CKWH-EAB1AA1Stock Code:CKWH-EAR1AA1Stock Code:CKWH-EAB1AA4Stock Code:CKWH-EAB2AA4Stock Code:CKWH-EAT2AA1Stock Code:CKWH-EAT2AA4Stock Code:CKWH-EABYAA1Stock Code:CKWH-EAS1AA1Stock Code:CKWH-EAB2BA1Stock Code:CKWH-EAB2BA4Stock Code:CKWH-EAS1BA1Stock Code:CKWH-EAB1BA1Stock Code:CKWH-EAB1BA4Stock Code:CKWH-EAR1BA4Stock Code:CKWH-EAR1BA1Stock Code:CKWH-EAT2BA1Stock Code:CKWH-EAP1BA1Stock Code:CKWH-EAS1CA1Stock Code:CKWH-EAT2CA1Stock Code:CKWH-EAB1CA1
R45 Centerlock™ hubs combine our low-drag 45-tooth RingDrive™ system, a lightweight hub body, our legendary made-in-house bearings, and now *Centerlock compatibility to harness the power of disc brakes. The result is the undeniable combination of the control of disc brakes, the fast rolling speed of our bearings on long flats, and the superior responsiveness of our RingDrive™ engagement system out of the corners.
- Engineered, manufactured and assembled in Portland, Oregon USA
- Legendary made-in-house bearings
- 5-year built-to-last warranty
- Patented RingDrive™ system with 45 simultaneously engaged points of contact for virtually drag free engagement
- Easily convertible axles 135mm x 10mm QR or 142mm x 12mm thru axle rear.
- Easily serviceable and completely re-buildable with our R45 Hub Service Tool
- Ceramic bearing upgrade available
*Centerlock is a proprietary mounting system that requires a Shimano lock ring to complete installation of rotor. Chris King R45 Centerlock hubs are compatible with the following Shimano lock rings:
Front:
(Y8K198010) – Typically supplied with genuine Shimano rotor.
(Y26N98030) – Typically sold as an after market part.
Rear:
(Y26N98030) – Typically sold as an after market partExpected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024$864.12 (RRP)$864.12 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP)$895.00 (RRP) -
Stock Code:CKWH-DAS1AAStock Code:CKWH-DAB1AAStock Code:CKWH-DAB2AAStock Code:CKWH-DAQ1AAStock Code:CKWH-DAR1AAStock Code:CKWH-DABYAAStock Code:CKWH-DAP1AAStock Code:CKWH-DAS1BAStock Code:CKWH-DAT2BAStock Code:CKWH-DAB2BAStock Code:CKWH-DAP1BAStock Code:CKWH-DAB1BAStock Code:CKWH-DAB1CAStock Code:CKWH-DAT2CAStock Code:CKWH-DAS1CA
R45 Centerlock™ hubs combine a lightweight hub body, our legendary made-in-house bearings, and now *Centerlock compatibility to harness the power of disc brakes. The result is the undeniable combination of the control of disc brakes, the fast rolling speed of our bearings.
- Engineered, manufactured and assembled in Portland, Oregon USA
- Legendary made-in-house bearings
- 5-year built-to-last warranty
- Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options.
- Easily serviceable and completely re-buildable with our R45 Hub Service Tool
- Ceramic bearing upgrade available
*Centerlock is a proprietary mounting system that requires a Shimano lock ring to complete installation of rotor. Chris King R45 Centerlock hubs are compatible with the following Shimano lock rings:
Front:
(Y8K198010) – Typically supplied with genuine Shimano rotor.
(Y26N98030) – Typically sold as an after market part.
Rear:
(Y26N98030) – Typically sold as an after market partExpected Date:06 June 2024$488.00 (RRP)$488.00 (RRP)$488.00 (RRP)$488.00 (RRP)$488.00 (RRP)$488.00 (RRP)$488.00 (RRP)$488.00 (RRP)$488.00 (RRP)$488.00 (RRP)$488.00 (RRP)$431.52 (RRP)$488.00 (RRP)$488.00 (RRP)$488.00 (RRP) -
Stock Code:CKWH-DAR1CA
R45 Centerlock™ hubs combine a lightweight hub body, our legendary made-in-house bearings, and now Centerlock compatibility to harness the power of disc brakes. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the rail steering from our one piece solid axles.
Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.
Engineered, manufactured and assembled in Portland, Oregon USA
Legendary made-in-house bearings
King Lifetime Warranty
Easily convertible axles 100mm x 9mm QR or 100mm x 12mm thru axle front options.
Easily serviceable and completely re-buildable with our R45 Hub Service Tool
Ceramic bearing upgrade available$488.00 (RRP) -
Stock Code:CKWH-2FE1302Stock Code:CKWH-2FT1306Was:$504.00 (RRP)Now:$275.00 (RRP)Price:$275.00 (RRP)Was:$396.63 (RRP)Now:$275.00 (RRP)Price:$275.00 (RRP)
-
Stock Code:CKWA-PHB790B
Convert your R45D Gen. 2, and R45D Centerlock hubs to XDR. Conversion kit is complete with axle and all driveshell internals for a plug and play swap to your R45D Gen. 2 andR45D Centerlock hub.
- Compatible with SRAM Red eTap AXS, Eagle AXS, and all XDR and XD cassettes.
- Compatible with R45D 6-Bolt Gen.2 hubs. Serial numbers will begin with 6910.
- Compatible with all R45D Centerlock hubs.
- 142x12mm axle. (Parts available separately for 135mm QR conversion kit)$508.31 (RRP)Add To Cart
-
Stock Code:CKSC-PHS213R
Chris King headsets spacers are turned from solid bar-stock to ensure precise and parallel surfaces and guarantee proper headset preload. And they look great too.
Kits include a 3mm, 2x6mm, and 2x12mm, spacers.Expected Date:06 June 2024$89.00 (RRP) -
Stock Code:CKWH-15-HBIF32R1I
Chris King Red 15mm thru axle MTB Front ISO Disc SD 32 hole Hub
Was:$300.00 (RRP)Price:$300.00 (RRP)Add To Cart
-
Stock Code:CKLU-THB023
RingDrive™ Lube 2.0 is a Nano-Particle lubricant engineered by Chris King to further reduce resistance and wear in your Chris King rear hub. In addition to lower resistance and a longer wear life RingDrive™ Lube 2.0 improves performance in cold weather conditions.
To install, simply remove old lubricant and contaminants from your RingDrive™, Drive, and Driven Rings and apply 1-2ml of RingDrive™ Lube 2.0. Only a 2.5mm hex key is required to perform the service.Expected Date:06 June 2024$43.00 (RRP) -
Stock Code:CKHS-PHS473Stock Code:CKHS-PHS475Stock Code:CKHS-PHS474
Chris King Seal & Snapring Kit for 1 Inch Headsets and Threadfit24 Bottom Brackets.
Expected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024$15.52 (RRP)$17.68 (RRP)$15.52 (RRP) -
Stock Code:CKSC-PHS213S
Chris King headsets spacers are turned from solid bar-stock to ensure precise and parallel surfaces and guarantee proper headset preload. And they look great too.
Kits include a 3mm, 2x6mm, and 2x12mm, spacers.Expected Date:06 June 2024$89.00 (RRP) -
Stock Code:CKLU-THB027
Chris King Silver Grease is a nano-particle lubricant optimized for hub and bottom bracket bearings. Designed for use as a high performance hub and bottom bracket bearing lubricant. This nano-particle lubricant is engineered to provide extremely low drag while still providing excellent weather resistance. Compatible with steel and Ceramic bearings.
Expected Date:06 June 2024$69.00 (RRP) -
Stock Code:CKLU-THB028
Chris King Silver Grease is a nano-particle lubricant optimized for hub and bottom bracket bearings. Designed for use as a high performance hub and bottom bracket bearing lubricant. This nano-particle lubricant is engineered to provide extremely low drag while still providing excellent weather resistance. Compatible with steel and Ceramic bearings.
Expected Date:06 June 2024$43.23 (RRP) -
Stock Code:CKTL-THB007
Chris King Small Split Ring (for the THB001 Hub Service Tool Kit)- THB007
POA -
Stock Code:CKXT-CKC0766
Insulated MIIR camp mug, in the perfect size for any morning or evening beverage, and printed with the classic KING® logo and Splash graphics in honor of our LE Splash component color.
- 355ml
- Press-fit slide lid
- Copper color with Turquoise and black ink$68.00 (RRP)Add To Cart
