Enduro

  • Enduro Lefty Headset bearing 50.8mm
    Stock Code:
    ENBG-ACB-B543-LLB-SS

    CANNONDALE LEFTY / HEADSHOK HEADSET BEARING

    Drop-in replacement B-543 bearing for Cannondale Headshok and Lefty headsets. Compatible Cannondale frames with either removable headset cups or drop-in, direct-fit bearings.

    - Stainless balls with stainless races
    - 50.8mm OD x 39.68mm ID x 7.14mm Width
    - Same as Cannondale part # HD169
    - BEARINGS SOLD INDIVIDUALLY

    Enduro Bearings manufactures some series of bearings using 440C stainless steel balls and races. This material provides maximum corrosion resistance in applications and environments where critical. Depending on the application, they are designed to ABEC-3 or ABEC-5 tolerances. Stainless steel has 20% less load capacity than the 52100 chromium steel, used in most of our bearings, but with far superior corrosion resistance.

    When the rain won’t go away, and your bicycle is more often used as a boat rather than a land craft, you may want to consider 440C stainless steel bearings. While a little softer than chromium bearing steel, 440C stainless steel is a good alternative in constant wet conditions, or where sweat becomes a problem such as headset bearings.

    Enduro Bearings uses LLB* type seals and CRC Marine Grease in these bearings to additionally water proof against the elements.

    * Enduro LLB Type Seals: Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $66.55 (RRP)

    Add To Cart

  • Enduro Lefty Hub Pin Tool
    Stock Code:
    ENTL-LHT-001

    Pin tool for removal/replace Lefty cap on Cannondale Lefty hubs.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $77.25 (RRP)
  • Enduro M8x22/24x8/7
    Stock Code:
    ENBG-BB-608-FE2RS-SP

    Enduro Abec 3 Specification:

    Grade 10 Chromium Steel Balls:
    High precision balls are within 10/1,000,000? round, twice as round as the industry standard, at it’s highest level.

    52100 High Carbon Chromium Alloy Races:
    Vacuum de-gassed process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-3 precision and noiseless movement.

    Riveted Steel Retainer for toughness, ABEC-3 tolerances and noise tested, C-3 or C-N Internal Clearance

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $14.66 (RRP)

    Add To Cart

  • Enduro Modular Bearing Multi Press
    Stock Code:
    ENTL-BRT-050

    The Enduro bearings Multi Press is designed to service a variety of bearing applications and components all in one tool-set.

    - The Multi Press will install headset cups, bottom bracket bearings, hub bearings, and linkage bearings.
    - This toolset includes 3 different length rods in 2 different diameters. The larger diameter rod is tasked with installing headset cups, while the 2 smaller diameter rods handle bottom bracket, hub and suspension linkage bearings. The 2 smaller diameter rods are compatible with the BRT-005 hub press, BRT-002 and BRT-003 bottom bracket service tools.
    - This compatiblity allows a customizable way to pack your toolbox for travel, taking only the components you need for lightweight packing.
    - The Multi Press Alloy handles are removable, exposing 15mm stainless steel endnuts for tight clearences in linkage assemblies.
    - Built into the stainless steel endnuts are delrin bearings for smooth operation while installing the bearings.

    Stock Level:
    1
    Stock Level:
    1
    $590.00 (RRP)

    Add To Cart

  • Enduro MR15267 15x26x7
    Stock Code:
    ENBG-BB-MR15267-LLU-C3

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $13.30 (RRP)

    Add To Cart

  • Enduro MR15267 15x26x7 ABEC 5
    Stock Code:
    ENBG-BB-MR15267-LBB

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $19.24 (RRP)

    Add To Cart

  • Enduro MR17286 17x28x6 MAX
    Stock Code:
    ENBG-BB-MR17286-LLU-MAX

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $13.98 (RRP)

    Add To Cart

  • Enduro MR17287 17x28x7 ABEC 3
    Stock Code:
    ENBG-BB-MR-17287-LLB

    ABEC 3 precision bearings with Grade 10 steel balls and cryogenically treated chromium steel races.

    Size: 17x28x7
    Seal: LLB

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $13.98 (RRP)

    Add To Cart

  • Enduro MR17287 17x28x7 ABEC 5
    Stock Code:
    ENBG-BB-MR17287-LBB

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $17.88 (RRP)

    Add To Cart

  • Enduro MR18307 18x30x7 ABEC 3
    Stock Code:
    ENBG-BB-MR-18307-LLB

    ABEC 3 precision bearings with Grade 10 steel balls and cryogenically treated chromium steel races.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    Expected Date:
    24 March 2021
    $9.79 (RRP)
  • Enduro MR18307 18x30x7 ABEC 5
    Stock Code:
    ENBG-BB-MR18307-LBB

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    Expected Date:
    24 March 2021
    $15.45 (RRP)
  • Enduro MR22378 22x37x8 ABEC 5
    Stock Code:
    ENBG-BB-MR22378LLB

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $19.24 (RRP)
  • Enduro MR23327 23x32x7 ABEC 3
    Stock Code:
    ENBG-BB-MR-23327-LLB

    ABEC 3 precision bearings with Grade 10 steel balls and cryogenically treated chromium steel races.

    Size: 23x32x7
    Seal: LLB

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $15.73 (RRP)

    Add To Cart

  • Enduro Needle Bearing Guide
    Stock Code:
    ENTL-NBT-030

    This is the tool for removal and installation of needle bearings in rear shocks on full suspension bicycles. These bearing guides are designed to be used with the BRT-045, front hub and needle bearing press.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $45.00 (RRP)
  • Enduro Outboard BB Tool Set
    Stock Code:
    ENTL-BRT-001

    Tool for removal and install of bearings into any standard outboard cups.


    NOTE: This tool is not compatible with 2013+ Shimano BB-9000 bottom brackets.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $209.61 (RRP)

    Add To Cart

  • Enduro Pedal Dummy Tool
    Stock Code:
    ENTL-CT-010

    Tool for making adjustments on frame when pedals are not in place or present. Threads into crank arm and rotates on smooth steel bearings.

    Stock Level:
    1
    Stock Level:
    1
    $159.65 (RRP)

    Add To Cart

  • Enduro Pilot Bushing Set
    Stock Code:
    ENTL-BBT-004

    Toolset that includes outer guides for all the most common bearing sizes.

    Can be used in conjunction with our Hub Press Tool (BRT-005).

    Stock Level:
    1
    Stock Level:
    1
    $247.20 (RRP)

    Add To Cart

  • Enduro Pro Bearing Removal Tool
    Stock Code:
    ENTL-BBT-200

    This tool set allows you to pull bearings that are pressed into a housing as found in all hubs and pivots. The slide hammer threads in 2 pieces for smaller bearing applications. This tool includes high-quality Stainless collets designed to remove bearings with an inside diameter between 8-40mm.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $590.00 (RRP)
  • Enduro Pro Fork Seal Tool
    Stock Code:
    ENTL-ST-010

    Professional fork seal installation tool for 32, 34. 35, 36 and 40mm seals.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $410.97 (RRP)

    Add To Cart

  • Enduro R6 3/8x7/8x9/32  ABEC 5
    Stock Code:
    ENBG-BB-R6-SRS

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro SRS Type Seals: Featured on many of our ABEC 5 level bearings, these seals employ a snap ring that can be removed with a small knife for quick and easy servicing. These seals can be removed with no danger of bending them while performing lubrication service, ensuring they will spin as smoothly after. The single sealing lip makes contact on a step machined into the inner race, and sealing as an axial face seal. This type of seal configurations has extremely low rolling resistance and speed, while being an effective barrier against dirt and water.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $14.66 (RRP)

    Add To Cart

  • Enduro R8 1/2x1-1/8x5/16 ABEC 5
    Stock Code:
    ENBG-BB-R8-VV

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $11.09 (RRP)

    Add To Cart

  • Enduro ROCKSHOX 32mm Seal Kit
    Stock Code:
    ENFS-FK-6611

    Seal Kit for Rockshox Reba, Sektor, Pike, Tora, *NEW type 32mm

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $60.77 (RRP)

    Add To Cart

  • Enduro ROCKSHOX 35mm Seal Kit
    Stock Code:
    ENFS-FK-6615

    Seal Kit for Rockshox Lyrik, Domain, New Pike, Boxxer Kit 35mm

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $60.77 (RRP)
  • Enduro Rocky Mountain Fox Service Tool
    Stock Code:
    ENTL-BRT-006

    This tool set is designed to remove the Ride-9 and Ride-4 systems on Rocky Mountain frames for FOX rear suspension service. It allows safe removal of the aluminum caps attached to the shock.

    Stock Level:
    1
    Stock Level:
    1
    $245.00 (RRP)

    Add To Cart