Enduro

  • Enduro 6903 17x30x7 XD15 G3
    Stock Code:
    ENBG-BB-CXD-6903-LLB

    Want to make your bike faster than any other? Had enough of servicing your ceramic bearings so that they will survive another rainy day race? Would you rather have a bottom bracket outlast your frameset? Then you have arrived at the solution. XD-15 ceramic bearings have it all - hands down the speediest, and longest lasting ceramic bearing available on the market. Nitrogen steel is the secret, precision machined and ground to ABEC-5 tolerances at our facility in Gilroy, California. Voted “Hands down the best bottom bracket we have ever tested” from Bike Radar, you can find out why. These bearings spin with the very least resistance of anything we have developed to date featuring oversized Grade 3 Silicon Nitride balls. On top of this, they will be spinning with the same ease one year or even two years from now, with longer intervals between servicing. No one else in the bicycle industry offers this combination of speed and durability: XD-15 bearings for wheels, bottom brackets, and drive train.

    - XD-15 are Corrosion Free, little serving required!

    - Si3N4 Grade 3 Balls

    - Silicone Seals allow Faster spinning

    - New Limited Warranty

    - Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    2
    Stock Level:
    2
    $209.85 (RRP)

    Add To Cart

  • Enduro 6903 MAX-E 10mm
    Stock Code:
    ENBG-BB-6903-LLU-MAX-E

    10mm Extended Race

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $16.41 (RRP)
  • Enduro 698 8x19x6 MAX
    Stock Code:
    ENBG-BB-698-LLU-MAX-BX

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $9.61 (RRP)
  • Enduro 699 9x20x6 ABEC 5
    Stock Code:
    ENBG-BB-699-LBB

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    2
    Stock Level:
    2
    $8.77 (RRP)

    Add To Cart

  • Enduro 7/32 Grade 25 Steel Balls 100
    Stock Code:
    ENBG-BK-5051

    Enduro 7/32 Grade 25 Steel Balls 100 pack

    Grade 25:
    Dura Ace or Campy Record quality

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $13.92 (RRP)
  • Enduro 7900 10x22x6 A/C MAX
    Stock Code:
    ENBG-BB-7900-2RS-MAX

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $11.15 (RRP)
  • Enduro 7900 10x22x6 MAX
    Stock Code:
    ENBG-BB-7900-1ZS-MAX

    MAX type bearings are designed specifically for suspension pivots. Using a special design where the maximum number of balls are inserted into the bearing, they have more load capacity than standard radial bearings The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with suspension pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    - 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals, full complement of bearings, up to 45% increased load capacity
    - Installed with shield facing out
    - 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals, full complement of bearings, up to 45% increased load capacity
    - MAX bearings are designed specifically for suspension pivots and have deeper race grooves for more lateral support

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $12.96 (RRP)
  • Enduro 7901 12x24x6 A/C MAX
    Stock Code:
    ENBG-BB-7901-2RS-MAX

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    POA
  • Enduro 7902 15x28x7 A/C MAX
    Stock Code:
    ENBG-BB-7902-2RS-MAX

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $13.64 (RRP)

    Add To Cart

  • Enduro 7902 15x28x7 MAX
    Stock Code:
    ENBG-BB-7902-1ZS-MAX

    MAX type bearings are designed specifically for suspension pivots. Using a special design where the maximum number of balls are inserted into the bearing, they have more load capacity than standard radial bearings The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with suspension pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    - 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals, full complement of bearings, up to 45% increased load capacity
    - Installed with shield facing out
    - 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals, full complement of bearings, up to 45% increased load capacity
    - MAX bearings are designed specifically for suspension pivots and have deeper race grooves for more lateral support

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $15.39 (RRP)

    Add To Cart

  • Enduro 7903 17x30x7 MAX
    Stock Code:
    ENBG-7903-2RS-MAX

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $14.32 (RRP)
  • Enduro 8x22x7 ZERO Ceramic
    Stock Code:
    ENBG-BB-CO-608-VV

    Proven time and again in World Cup race conditions, the ZERØ Ceramic bearings are the ultimate race day weapon. Oversized Grade 3 balls roll on races which are ground to a mirror finish after receiving Magnetite and then Cryogenic treatments for hardness and longevity. More durable and with even lower rolling resistance than any 2RS bearings, they come closer to that magic “zero” rolling resistance number. Enduro Bearings uses Silicone seals which are more slippery than rubber seals used by other ceramic bearing suppliers. We get more email and blog feedback on the ZERØ's than any other bearing, describing the noticed difference in downhill rolling speed. And they win the independent wattage output tests when stacked against the competition. If you want to buy raw speed, ZERØ bearings are it.

    - ABEC 5 precision cartridge bearing
    - CERBEC USA Grade 3 Si3n4 Silicon Nitride balls
    - 52100 high carbon Chromium alloy races
    - Races receive 3 cryogenic treatments and a rust proof Magnetite finish
    - "VV" type 2-lip non-contact Silicone labyrinth seals

    Enduro VV Type Seals
    Developed with the idea of rolling as fast as possible, this dual lip configuration does not make contact with the bottom of the machined groove. Since these bearings also have a high rate of grease fill, the grease migrates to the bottom of the groove where a hydromatic type seal is established between the 2 lips and the grease in the groove. This grease barrier keeps the dirt and contaminates from coming inside the bearing, while still rolling smoothly and with the least resistance of all our bearings.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $60.33 (RRP)

    Add To Cart

  • Enduro A/C S/S BB30 > 24mm TT Black
    Stock Code:
    ENBB-BKS-0151

    Enduro TorqTite Stainless Bottom Brackets

    - TorqTite bottom brackets use a threaded center sleeve for a perfectly aligned and creak free installation
    - Angular contact 440C stainless steel bearings
    - TorqTite bottom brackets require two Enduro TorqTite wrenches for proper installation.

    - BB Shell Width (mm): 68 mm , 73 mm
    - BB/Frame Interface: BB30
    - Bottom Bracket Shell I.D.: 42
    - Spindle Interface Type: FSA MegaExo , FSA MegaExo Light , Shimano Hollowtech II , SRAM/Truvativ GXP

    Stock Level:
    2
    Stock Level:
    2
    $288.00 (RRP)

    Add To Cart

  • Enduro A/C S/S BB30 > BB386EVO TT Black
    Stock Code:
    ENBB-BKS-0159

    For the ultimate bottom bracket bearings, and for many hubs, these are the best bearings available for speed, balance, and longevity. Because they utilize a large surface area design, the load from all the balls is shared equally at all times, spinning faster than any radial bearing where only 30% of the balls may be taking the load. A patented Enduro Bearings design, they may be serviced just as any other bearing with no special tools needed. Perfect for disc brake wheels where you need to remove all wheel play. Just remember, the RED color seal side is the loading side; don’t BLACK out! Also now available in ceramic for 2015.

    Stock Level:
    2
    Stock Level:
    2
    $288.00 (RRP)

    Add To Cart

  • Enduro A/C S/S BB386EVO > 24mm TT Black
    Stock Code:
    ENBB-BKS-0141

    Enduro TorqTite Stainless Bottom Brackets

    - TorqTite bottom brackets use a threaded center sleeve for a perfectly aligned and creak free installation
    - Angular contact 440C stainless steel bearings
    - TorqTite bottom brackets require two Enduro TorqTite wrenches for proper installation.

    - BB Shell Width (mm): 86 mm
    - BB/Frame Interface: 386EVO
    - Bottom Bracket Shell I.D.: 46
    - Spindle Interface Type: Shimano Hollowtech II , SRAM/Truvativ GXP , FSA MegaExo , FSA MegaExo Light

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $288.00 (RRP)

    Add To Cart

  • Enduro A/C S/S BB386EVO > 24mm TT Red
    Stock Code:
    ENBB-BKS-0140

    Enduro TorqTite Stainless Bottom Brackets

    - TorqTite bottom brackets use a threaded center sleeve for a perfectly aligned and creak free installation
    - Angular contact 440C stainless steel bearings
    - TorqTite bottom brackets require two Enduro TorqTite wrenches for proper installation.

    - BB Shell Width (mm): 86 mm
    - BB/Frame Interface: 386EVO
    - Bottom Bracket Shell I.D.: 46
    - Spindle Interface Type: Shimano Hollowtech II , SRAM/Truvativ GXP , FSA MegaExo , FSA MegaExo Light

    Stock Level:
    2
    Stock Level:
    2
    $288.00 (RRP)

    Add To Cart

  • Enduro A/C S/S BB386EVO TT BB Black
    Stock Code:
    ENBB-BKS-0161

    Enduro TorqTite Stainless Bottom Brackets

    - TorqTite bottom brackets use a threaded center sleeve for a perfectly aligned and creak free installation
    - Angular contact 440C stainless steel bearings
    - TorqTite bottom brackets require two Enduro TorqTite wrenches for proper installation.

    - BB Shell Width (mm): 86 mm
    - BB/Frame Interface: 386EVO
    - Bottom Bracket Shell I.D.: 46
    - Spindle Interface Type: 386 EVO , Rotor 3D+

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $288.00 (RRP)

    Add To Cart

  • Enduro A/C S/S BB86/92 TT Black
    Stock Code:
    ENBB-BKS-0121

    Enduro TorqTite Stainless Bottom Brackets

    - TorqTite bottom brackets use a threaded center sleeve for a perfectly aligned and creak free installation
    - Angular contact 440C stainless steel bearings
    - TorqTite bottom brackets require two Enduro TorqTite wrenches for proper installation.

    - BB Shell Width (mm): 86 mm , 92 mm
    - Bottom Bracket Shell I.D.: 41
    - Spindle Interface Type: FSA MegaExo , FSA MegaExo Light , Shimano Hollowtech II , SRAM/Truvativ GXP

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $288.00 (RRP)
  • Enduro A/C S/S BBright > 24mm TT Black
    Stock Code:
    ENBB-BKS-0116

    Enduro TorqTite Stainless Bottom Brackets

    - TorqTite bottom brackets use a threaded center sleeve for a perfectly aligned and creak free installation
    - Angular contact 440C stainless steel bearings
    - TorqTite bottom brackets require two Enduro TorqTite wrenches for proper installation.

    - BB Shell Width (mm): 79 mm
    - BB/Frame Interface: BBright Direct Fit
    - Bottom Bracket Shell I.D.: 42
    - Spindle Interface Type: FSA MegaExo , FSA MegaExo Light , Shimano Hollowtech II , SRAM/Truvativ GXP

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $288.00 (RRP)
  • Enduro A/C S/S BBright BB TT Black
    Stock Code:
    ENBB-BKS-0139

    For the ultimate bottom bracket bearings, and for many hubs, these are the best bearings available for speed, balance, and longevity. Because they utilize a large surface area design, the load from all the balls is shared equally at all times, spinning faster than any radial bearing where only 30% of the balls may be taking the load. A patented Enduro Bearings design, they may be serviced just as any other bearing with no special tools needed. Perfect for disc brake wheels where you need to remove all wheel play. Just remember, the RED color seal side is the loading side; don’t BLACK out! Also now available in ceramic for 2015.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $288.00 (RRP)
  • Enduro A/C S/S PF30 > 24mm TT Black
    Stock Code:
    ENBB-BKS-0111

    Enduro TorqTite Stainless Bottom Brackets

    - TorqTite bottom brackets use a threaded center sleeve for a perfectly aligned and creak free installation
    - Angular contact 440C stainless steel bearings
    - TorqTite bottom brackets require two Enduro TorqTite wrenches for proper installation.

    - BB Shell Width (mm): 68 mm , 73 mm
    - BB/Frame Interface: PF30
    - Bottom Bracket Shell I.D.: 46
    - Defined Color: Black
    - Spindle Interface Type: FSA MegaExo , FSA MegaExo Light , Shimano Hollowtech II , SRAM/Truvativ GXP

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $288.00 (RRP)

    Add To Cart

  • Enduro A/C S/S PF30 > BB386EVO TT Black
    Stock Code:
    ENBB-BKS-0119

    For the ultimate bottom bracket bearings, and for many hubs, these are the best bearings available for speed, balance, and longevity. Because they utilize a large surface area design, the load from all the balls is shared equally at all times, spinning faster than any radial bearing where only 30% of the balls may be taking the load. A patented Enduro Bearings design, they may be serviced just as any other bearing with no special tools needed. Perfect for disc brake wheels where you need to remove all wheel play. Just remember, the RED color seal side is the loading side; don’t BLACK out! Also now available in ceramic for 2015.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $288.00 (RRP)

    Add To Cart

  • Enduro A/C S/S PF30 TT BB Black
    Stock Code:
    ENBB-BKS-0131

    Enduro TorqTite Stainless Bottom Brackets

    - TorqTite bottom brackets use a threaded center sleeve for a perfectly aligned and creak free installation
    - Angular contact 440C stainless steel bearings
    - TorqTite bottom brackets require two Enduro TorqTite wrenches for proper installation.

    - BB Shell Width (mm): 68 mm , 73 mm
    - BB/Frame Interface: PF30
    - Bottom Bracket Shell I.D.: 46
    - Spindle Interface Type: BB30/PF30

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $288.00 (RRP)

    Add To Cart

  • Enduro A3 10x19x5mm
    Stock Code:
    ENBG-BB-6800-LLB/C3

    Enduro ABEC-3 bearings start with high-precision Grade 10 Balls are ground within 10/1,000,000? round, which is twice as round as the industry standard, at it’s highest level.

    Enduro Bearings uses highest quality 52100 High Carbon Chromium Steel Alloy race material from Japan. There are many suppliers of 52100 material, but they do not all necessarily provide the same quality material. The material for Enduro steel races starts with and extremely-pure, vacuum de-gassed chromium steel alloy that is then hardened to Rockwell HRC 64 by multiple rounds of heat and cryogenic treatment. The material is then cut to size and the races are machined, ground and polished to a mirror finish for ABEC-3 precision and noiseless movement.

    Enduro ABEC-3 bearings also feature riveted steel bearing retainers for toughness, and are noise tested to meet or exceed ABEC-3 tolerances

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $7.61 (RRP)

    Add To Cart