Enduro

  • Enduro 24x37x7 ZERO Ceramic BB90
    Stock Code:
    ENBG-BB-CO-MR2437-VV

    Direct OEM replacement for most BB86/92, Trek BB90/95 (individual bearing)

    Proven time and again in World Cup race conditions, the ZERØ Ceramic bearings are the ultimate race day weapon. Oversized Grade 3 balls roll on races which are ground to a mirror finish after receiving Magnetite and then Cryogenic treatments for hardness and longevity. More durable and with even lower rolling resistance than any 2RS bearings, they come closer to that magic “zero” rolling resistance number. Enduro Bearings uses Silicone seals which are more slippery than rubber seals used by other ceramic bearing suppliers. We get more email and blog feedback on the ZERØ's than any other bearing, describing the noticed difference in downhill rolling speed. And they win the independent wattage output tests when stacked against the competition. If you want to buy raw speed, ZERØ bearings are it.

    - ABEC 5 precision cartridge bearing
    - CERBEC USA Grade 3 Si3n4 Silicon Nitride balls
    - 52100 high carbon Chromium alloy races
    - Races receive 3 cryogenic treatments and a rust proof Magnetite finish
    - "VV" type 2-lip non-contact Silicone labyrinth seals

    Enduro VV Type Seals
    Developed with the idea of rolling as fast as possible, this dual lip configuration does not make contact with the bottom of the machined groove. Since these bearings also have a high rate of grease fill, the grease migrates to the bottom of the groove where a hydromatic type seal is established between the 2 lips and the grease in the groove. This grease barrier keeps the dirt and contaminates from coming inside the bearing, while still rolling smoothly and with the least resistance of all our bearings.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $125.92 (RRP)
  • Enduro 25x37x7 ZERO Ceramic
    Stock Code:
    ENBG-BB-CO-6805-VV

    Proven time and again in World Cup race conditions, the ZERØ Ceramic bearings are the ultimate race day weapon. Oversized Grade 3 balls roll on races which are ground to a mirror finish after receiving Magnetite and then Cryogenic treatments for hardness and longevity. More durable and with even lower rolling resistance than any 2RS bearings, they come closer to that magic “zero” rolling resistance number. Enduro Bearings uses Silicone seals which are more slippery than rubber seals used by other ceramic bearing suppliers. We get more email and blog feedback on the ZERØ's than any other bearing, describing the noticed difference in downhill rolling speed. And they win the independent wattage output tests when stacked against the competition. If you want to buy raw speed, ZERØ bearings are it.

    - ABEC 5 precision cartridge bearing
    - CERBEC USA Grade 3 Si3n4 Silicon Nitride balls
    - 52100 high carbon Chromium alloy races
    - Races receive 3 cryogenic treatments and a rust proof Magnetite finish
    - "VV" type 2-lip non-contact Silicone labyrinth seals

    Enduro VV Type Seals
    Developed with the idea of rolling as fast as possible, this dual lip configuration does not make contact with the bottom of the machined groove. Since these bearings also have a high rate of grease fill, the grease migrates to the bottom of the groove where a hydromatic type seal is established between the 2 lips and the grease in the groove. This grease barrier keeps the dirt and contaminates from coming inside the bearing, while still rolling smoothly and with the least resistance of all our bearings.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $139.90 (RRP)

    Add To Cart

  • Enduro 3/16 Grade 25 Steel Balls 100
    Stock Code:
    ENBG-BK-5041

    Enduro 3/16 Grade 25 Steel Balls 100 pack

    Grade 25:
    Dura Ace or Campy Record quality

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $14.94 (RRP)

    Add To Cart

  • Enduro 3/4x1-5/8
    Stock Code:
    ENBG-BB-R12-LLB/C3

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $9.42 (RRP)

    Add To Cart

  • Enduro 30mm ID BB Press/Remove
    Stock Code:
    ENTL-BRT-002

    This tool allows you to safely remove and install the 6806 bearings into any model BB30 bottom bracket. It will now also work with any PF30 system.

    Stock Level:
    2
    Stock Level:
    2
    $329.09 (RRP)

    Add To Cart

  • Enduro 30x42x7 ZERO Ceramic
    Stock Code:
    ENBG-BB-CO-6806-VV

    Proven time and again in World Cup race conditions, the ZERØ Ceramic bearings are the ultimate race day weapon. Oversized Grade 3 balls roll on races which are ground to a mirror finish after receiving Magnetite and then Cryogenic treatments for hardness and longevity. More durable and with even lower rolling resistance than any 2RS bearings, they come closer to that magic “zero” rolling resistance number. Enduro Bearings uses Silicone seals which are more slippery than rubber seals used by other ceramic bearing suppliers. We get more email and blog feedback on the ZERØ's than any other bearing, describing the noticed difference in downhill rolling speed. And they win the independent wattage output tests when stacked against the competition. If you want to buy raw speed, ZERØ bearings are it.

    - ABEC 5 precision cartridge bearing
    - CERBEC USA Grade 3 Si3n4 Silicon Nitride balls
    - 52100 high carbon Chromium alloy races
    - Races receive 3 cryogenic treatments and a rust proof Magnetite finish
    - "VV" type 2-lip non-contact Silicone labyrinth seals

    Enduro VV Type Seals
    Developed with the idea of rolling as fast as possible, this dual lip configuration does not make contact with the bottom of the machined groove. Since these bearings also have a high rate of grease fill, the grease migrates to the bottom of the groove where a hydromatic type seal is established between the 2 lips and the grease in the groove. This grease barrier keeps the dirt and contaminates from coming inside the bearing, while still rolling smoothly and with the least resistance of all our bearings.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $103.90 (RRP)

    Add To Cart

  • Enduro 35x47x7mm  (Headset)
    Stock Code:
    ENBG-BB-6807-LLB

    USED ON PINARELLO ROAD BIKES WITH NON-TAPERED 1-1/4? HEADSET

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    POA
  • Enduro 3802 15x24x7 MAX
    Stock Code:
    ENBG-BB-3802-LLU-MAX

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    1
    Stock Level:
    1
    $40.52 (RRP)

    Add To Cart

  • Enduro 3803 17x26x10
    Stock Code:
    ENBG-BB-3803-LLB-W
    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $36.73 (RRP)
  • Enduro 398 8x19x10/11 MAX-E 10mm
    Stock Code:
    ENBG-BB-398-LLU-MAX-E

    10mm Extended Race

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $19.58 (RRP)

    Add To Cart

  • Enduro 398 8x19x10/13 MAX-EE
    Stock Code:
    ENBG-BB-398-LLU-MAX-EE
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $21.68 (RRP)

    Add To Cart

  • Enduro 40x52x7 MAX
    Stock Code:
    ENBG-BB-6808-LLU-MAX-BX

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $27.96 (RRP)

    Add To Cart

  • Enduro 5/32 Grade 25 Steel Balls 100
    Stock Code:
    ENBG-BK-5049

    Enduro 5/32 Grade 25 Steel Balls 100 pack

    Grade 25:
    Dura Ace or Campy Record quality

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $16.98 (RRP)
  • Enduro 6000 0.5x26x7/10 MAX
    Stock Code:
    ENBG-BB-6000-SM-MAX

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $27.96 (RRP)

    Add To Cart

  • Enduro 6000 FE 10x26/28x8/9
    Stock Code:
    ENBG-BB-6000-FE

    6000-FE-2RS Flanged Extended Inner Bike Bearing Abec 3 10x26/28x8/9

    Enduro Abec 3 Specification:
    Grade 10 Chromium Steel Balls:
    High precision balls are within 10/1,000,000? round, twice as round as the industry standard, at it’s highest level.

    52100 High Carbon Chromium Alloy Races:
    Vacuum de-gassed process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-3 precision and noiseless movement.

    Riveted Steel Retainer for toughness, ABEC-3 tolerances and noise tested, C-3 or C-N Internal Clearance

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $11.88 (RRP)

    Add To Cart

  • Enduro 6001 12x28x8 MAX
    Stock Code:
    ENBG-6001LLUMAX

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $10.98 (RRP)

    Add To Cart

  • Enduro 6003 17x35x10
    Stock Code:
    ENBG-BB-6003-LLB/C3

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $9.05 (RRP)
  • Enduro 6004 20x42x12
    Stock Code:
    ENBG-BB-6004-LLB
    Stock Level:
    2
    Stock Level:
    2
    $10.87 (RRP)

    Add To Cart

  • Enduro 606 6x17x6 MAX
    Stock Code:
    ENBG-BB-606-LLU-MAX-BX

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $28.30 (RRP)

    Add To Cart

  • Enduro 608 8x22/24x8/7
    Stock Code:
    ENBG-BB-608-FE2RS-C3

    These bearings are made using Grade 10 Chromium Steel Balls, 52100 High Carbon Chromium Alloy Races and Riveted Steel Retainers. Enduro Blue series bearings are ABEC 3 standard with C3 clearance.

    Flanged and extended inner race

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $10.13 (RRP)

    Add To Cart

  • Enduro 608 8x22x7 MAX
    Stock Code:
    ENBG-BB-608-LLU-MAX

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $8.77 (RRP)

    Add To Cart

  • Enduro 608 8x22x7 MAX-E 10mm
    Stock Code:
    ENBG-BB-608-LLU-MAX-E

    10mm Extended Race

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $10.87 (RRP)

    Add To Cart

  • Enduro 608 M8x22/24x11/7
    Stock Code:
    ENBG-BB-608-FE2RS-SPMX

    Enduro Abec 3 Specification:

    Grade 10 Chromium Steel Balls:
    High precision balls are within 10/1,000,000? round, twice as round as the industry standard, at it’s highest level.

    52100 High Carbon Chromium Alloy Races:
    Vacuum de-gassed process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-3 precision and noiseless movement.

    Riveted Steel Retainer for toughness, ABEC-3 tolerances and noise tested, C-3 or C-N Internal Clearance

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $21.68 (RRP)

    Add To Cart

  • Enduro 609 9x24x7
    Stock Code:
    ENBG-BB-609-LLB

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $6.32 (RRP)

    Add To Cart