Enduro 22378 22x37x8/11.5 ABEC 3
Description
ABEC 3 precision bearings with Grade 10 steel balls and cryogenically treated chromium steel races.
Part Number: 282864
Size: 22x37x8/11.5
Seal: LLB
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBG-CSB-0607C*$33.36 (RRP)
Add To Cart
-
Stock Code:ENBG-BK-5539
* Picture not actual kit
- Blur TR
- Tallboy 1.0 Carbon
Pivot bearings are exposed to a vast range of dirt, water, sand and other abuses. We have designed our MAX type bearings to handle these extreme conditions and use them in all of our suspension kits. They have a 35-40% higher load capacity than the standard retainer type bearings most people sell. We also pack them on both sides with a high impact, water proof grease.
The result for you is a much more active and quick rear suspension, eliminating play and wag all at the same time. Upgrading your rear suspension with Enduro Bearings MAX bearings will save you time and money, as they will perform well 2 or 3 times longer than the stock set up.$124.50 (RRP)Add To Cart
-
Stock Code:ENBG-BB-6804-LLU-MAX
Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.
Expected Date:24 March 2021$18.22 (RRP) -
Stock Code:ENBG-BB-61002-LBB
- Grade 5 Chromium Steel Balls
- High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
- 52100 High Carbon Chromium Alloy Races
- Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
- Graphite/Nylon Ball Retainers
- Nylon with graphite retainers are virtually frictionless while providing constant lubrication.
The ABEC 5 Standard
To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.
C-3 Clearance
This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.
Enduro LLB Type Seals
Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.$16.41 (RRP)Add To Cart
-
Stock Code:ENBG-BB-61808-VV
- Grade 5 Chromium Steel Balls
- High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
- 52100 High Carbon Chromium Alloy Races
- Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
- Graphite/Nylon Ball Retainers
- Nylon with graphite retainers are virtually frictionless while providing constant lubrication.
The ABEC 5 Standard
To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.
C-3 Clearance
This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.
Enduro LLB Type Seals
Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.$41.65 (RRP)Add To Cart
