Enduro Zerø Ceramic Jockey Wheels SRAM22
Description
Enduro Zerø Ceramic Jockey Wheel Set SRAM 22 Black
Independently tested and winning competitions for the least rolling resistance, the truly best part of these jockey wheels is the silent and crisp shifting they afford. Machined from solid Delrin at our California machine shop, not molded, they are much harder and precise than any competitor's that have copied this design. Where aluminum jockey wheels are loud and deteriorate almost immediately after installing, Enduro Bearings jockey wheels will shift perfectly and precisely a year or two from now just the same as the day you installed them
Webshops and Bike shops
You may also be interested in...
-
Stock Code:ENDR-BKCJ-0301
Enduro XD15 Ceramic Jockey Wheels SHIMANO 9,10 or 11 Black
The ultimate jockey wheel with Enduro XD-15 bearings. Not only 1 gram lighter each than the super light ZERØ’s, these will outlast your derailleur’s lifespan! They will spin with the same speed years from now, as fast as the day you installed them. When installed with our XD-15 bottom bracket and XD-15 wheel kit, these complete the ultimate Enduro Bearings Speed Kit for your bike, reducing the overall friction to almost nothing.$277.07 (RRP)Add To Cart
-
Stock Code:PSDR-DP0910Stock Code:PSDR-DP0911Stock Code:PSDR-DP0920Stock Code:PSDR-DP0921Stock Code:PSDR-DP0930Stock Code:PSDR-DP0931POAPOAPOAPOAPOAPOA
-
Stock Code:SMDR53102
Old road frames with a braze-on derailleur mount were designed for large road rings. They aren't compatible with sub-compact chainrings
This adapter for the frame front derailleur braze-on allows you to mount your derailleur lower to get it to work with smaller chainrings.$68.89 (RRP)Add To Cart
-
Stock Code:ENDR-BKCJ-0500
ENDURO XD-15 PULLEY SET FOR SRAM EAGLE 12 SPEED
Replaces OE pulley set and idler on all SRAM Eagle 12 speed derailleurs (including GX). Are you looking for increased shifting performance that you can actually feel? These new pulleys are considerabley stiffer than stock due to their large, hollow aluminum centers. The outer wheels are Delrin for very quiet shifts. XD-15 ceramic hybrid bearings have a LIFETIME WARRANTY. They will NOT corrode in even the harshest conditions.
And did we mention faster race times due to reduced friction?
The large lower pulley uses a custom designed XD-15 bearing for quick alignment with the cassette cogs and less friction and noise. The Enduro Idler pulley replaces a bushing with a bearing in order to decrease shift friction by a noticeable amount, especially when shifting up to the larger cogs.
XD-15 high-nitrogen steel alloy races are corrosion proof and long-wearing. They are matched with Grade 3 Silicon Nitride ceramic ball bearings.POA -
Stock Code:WTDRSHF-ISEV-ISII
ShiftMounts are adapter mounts which allows you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura. Handlebar space is prime real-estate and this ShiftMount integrates seamlessly for a clean look.
Mount Type
ShiftMount naming convention is [shifter type - brake type]
MM-ISII is for a SRAM Matchmaker shifter mounting to a Shimano I-Spec II brake
MM-ISEV is for a SRAM Matchmaker shifter mounting to a Shimano I-Spec EV brake
ISEV-ISB is for a Shimano I-Spec EV shifter mounting to a Shimano I-Spec B brake
ISEV-ISII is for a Shimano I-Spec EV shifter mounting to a Shimano I-Spec II brake
MM-MAG is for a SRAM Matchmaker shifter mounting to a Magura brake
Compatibility
Designed to work with rear (right side) brakes and shifters.
Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters.
MM-ISEV, MM-ISII, & MM-MAG is compatible with but not designed for SRAM AXS. With SRAM AXS the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders.
Shimano I-spec A, Hope, and TRP brakes are not supported.
Shimano I-spec EV to Magura brakes is not supported because of geometric challenges.$46.96 (RRP)Add To Cart
