Wheels MFG SBR6 22.2x9.5x7mm pair
Wheels MFG SBR6 22.2x9.5x7mm Sealed Bearing pair
Webshops and Bike shops
You may also be interested in...
Stock Code:CKBG-PHB516Stock Code:CKBG-PHB517Stock Code:CKBG-PHB518Stock Code:CKBG-PHB515Stock Code:CKBG-PHB700Stock Code:CKBG-PHB343
CHRIS KING ISO MTB HUB BEARINGS
This bearing is designed for use only on Chris King second generation Front 15mmLD and 20mm hubs with a serial number that starts with 172.Stock Level:In StockStock Level:In StockStock Level:In StockStock Level:2Stock Level:2Stock Level:Out of StockStock Level:2$82.29 (RRP)$82.29 (RRP)$75.82 (RRP)$100.39 (RRP)$82.29 (RRP)$75.71 (RRP)
Stock Code:CKBG-PHB723Stock Code:CKBG-PHB730Stock Code:CKBG-PHB716Stock Code:CKBG-PHB731Stock Code:CKBG-PHB713Stock Code:CKBG-PHB729Stock Code:CKBG-PHB715Stock Code:CKBG-PHB732Stock Code:CKBG-PHB714
CHRIS KING R45/ROAD HUB BEARINGSStock Level:In StockStock Level:In StockStock Level:In StockStock Level:2Stock Level:In StockStock Level:2Stock Level:Out of StockStock Level:1Stock Level:Out of StockStock Level:1$82.29 (RRP)$161.28 (RRP)$82.29 (RRP)$161.28 (RRP)$75.71 (RRP)$153.06 (RRP)$82.29 (RRP)$161.28 (RRP)$82.29 (RRP)
Wheels MFG CERAMIC loose Ball 7/32" bearing 25 packStock Level:In StockStock Level:In Stock$262.08 (RRP)
Add To Cart
BB30 service kit for SRAM DUB cranks includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips.
Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm
Enduro ABEC-3 bearings
Use with SRAM DUB cranks
Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.Stock Level:In StockStock Level:In Stock$78.00 (RRP)
Add To Cart
Want to make your bike faster than any other? Had enough of servicing your ceramic bearings so that they will survive another rainy day race? Would you rather have a bottom bracket outlast your frameset? Then you have arrived at the solution. XD-15 ceramic bearings have it all - hands down the speediest, and longest lasting ceramic bearing available on the market. Nitrogen steel is the secret, precision machined and ground to ABEC-5 tolerances at our facility in Gilroy, California. Voted “Hands down the best bottom bracket we have ever tested” from Bike Radar, you can find out why. These bearings spin with the very least resistance of anything we have developed to date featuring oversized Grade 3 Silicon Nitride balls. On top of this, they will be spinning with the same ease one year or even two years from now, with longer intervals between servicing. No one else in the bicycle industry offers this combination of speed and durability: XD-15 bearings for wheels, bottom brackets, and drive train.
- XD-15 are Corrosion Free, little serving required!
- Si3N4 Grade 3 Balls
- Silicone Seals allow Faster spinning
- New Limited Warranty
- Enduro LLB Type Seals
Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.Stock Level:Out Of StockStock Level:Out of Stock$209.85 (RRP)