Chris King

Chris King
  • CHRIS KING BASE PLATE S/S
    • CHRIS KING BASE PLATE S/S
    • CHRIS KING BASE PLATE S/S
    • CHRIS KING BASE PLATE S/S
    • CHRIS KING BASE PLATE S/S
    • CHRIS KING BASE PLATE S/S
    • CHRIS KING BASE PLATE S/S
    Stock Code:
    CKHS-PHS430
    Stock Code:
    CKHS-PHS434
    Stock Code:
    CKHS-PHS432
    Stock Code:
    CKHS-PHS529
    Stock Code:
    CKHS-PHS625
    Stock Code:
    CKHS-PHS626

    Chris King Base Plate Stainless Steel.

    Select Size.

    Chris King Baseplate (crown race) - Stainless Steel - 1-1/4 Inch

    Chris King 1-1/8" Base Plate Stainless Steel

    Chris King 1-1/8" Base Plate (Crown Race) 5mm high Stainless Steel

    Chris King 1.5" Base Plate (Crown Race) Stainless Stee

    Chris King 1.5"r Base Plate (Crown Race) 1.5">1-1/8" Stainless Steel

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Expected Date:
    01 April 2019
    Expected Date:
    01 April 2019
    Expected Date:
    01 April 2019
    Expected Date:
    01 April 2019
    Expected Date:
    01 April 2019
    $31.88 (RRP)
    $31.88 (RRP)
    $31.88 (RRP)
    $41.45 (RRP)
    $41.45 (RRP)
    $41.45 (RRP)

    Add To Cart

  • CHRIS KING NTS STEM CAP
    • CHRIS KING NTS STEM CAP
    • CHRIS KING NTS STEM CAP
    • CHRIS KING NTS STEM CAP
    Stock Code:
    CKHS-PHS455B
    Stock Code:
    CKHS-PHS530S
    Stock Code:
    CKHS-PHS456B
    Stock Code:
    CKHS-PHS532Y
    Stock Code:
    CKHS-PHS532S
    Stock Code:
    CKHS-PHS532R
    Stock Code:
    CKHS-PHS532N
    Stock Code:
    CKHS-PHS532L
    Stock Code:
    CKHS-PHS532K
    Stock Code:
    CKHS-PHS532B
    Stock Code:
    CKHS-PHS456Y
    Stock Code:
    CKHS-PHS456R
    Stock Code:
    CKHS-PHS456N
    Stock Code:
    CKHS-PHS456M
    Stock Code:
    CKHS-PHS456L
    Stock Code:
    CKHS-PHS532T
    Stock Code:
    CKHS-PHS605B
    Stock Code:
    CKHS-PHS605S

    Chris King 1" Stem Cap (NTS) Trad Bold Laser Mark logo

    Chris King 1" Silver Stem Cap (NTS) Sotto Voce logo

    Chris King 1-1/8" Black Stem Cap (NTS) Trad Bold Laser Mark logo

    Chris King 1-1/8" Gold Stem Cap (NTS) Sotto Voce logo

    Chris King 1-1/8" Silver Stem Cap (NTS) Sotto Voce logo

    Chris King 1-1/8" Red Stem Cap (NTS) Sotto Voce logo

    Chris King 1-1/8" Navy Stem Cap (NTS) Sotto Voce logo

    Chris King 1-1/8" Pewter Stem Cap (NTS) Sotto Voce logo

    Chris King 1-1/8" Pink Stem Cap (NTS) Sotto Voce logo

    Chris King 1-1/8" Black Stem Cap (NTS) Sotto Voce logo

    Chris King 1-1/8" Bold Stem Cap (NTS) Trad Bold Laser Mark logo

    Chris King 1-1/8" Red Stem Cap (NTS) Trad Bold Laser Mark logo

    Chris King 1-1/8" Navy Stem Cap (NTS) Trad Bold Laser Mark logo

    Chris King 1-1/8" Mango Stem Cap (NTS) Trad Bold Laser Mark logo

    Chris King 1-1/8" Pewter Stem Cap (NTS) Trad Bold Laser Mark logo

    Chris King 1.5" Black Stem Cap (NTS) Sotto Voce logo

    Chris King 1.5" Silver Stem Cap (NTS) Sotto Voce logo

    Stock Level:
    1
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    1
    Stock Level:
    1
    Stock Level:
    1
    Stock Level:
    1
    Stock Level:
    1
    Stock Level:
    1
    Stock Level:
    1
    Stock Level:
    2
    Stock Level:
    1
    Stock Level:
    In Stock
    Stock Level:
    1
    Stock Level:
    1
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $27.10 (RRP)
    $30.30 (RRP)
    $30.30 (RRP)

    Add To Cart

  • CHRIS KING SCUFF WASHER
    • CHRIS KING SCUFF WASHER
    • CHRIS KING SCUFF WASHER
    • CHRIS KING SCUFF WASHER
    Stock Code:
    CKHS-PHS476
    Stock Code:
    CKHS-PHS477
    Stock Code:
    CKHS-PHS641

    Chris King Scuff Washer for 1 inch Chris King NTS Headsets

    Chris King Scuff Washer 1-1/8

    Chris King Scuff Washer 1.5

    Stock Level:
    2
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $4.80 (RRP)
    $4.80 (RRP)
    $4.80 (RRP)

    Add To Cart

  • CHRIS KING GRIPNUT CONVERSION KIT 1-1/8"
    Stock Code:
    CKHS-PHS006B

    Chris King Black 1-1/8" Grip Nut Conversion Kit

    Kit includes lock nut, threaded collet,adjusting ring and baseplate – all the pieces
    you'll need to convert a NoThreadSet or 2Nut to a GripNut.

    Please note that this systemis not intended for use with spacers.

    Stock Level:
    1
    $100.72 (RRP)

    Add To Cart

  • CHRIS KING GRIPLOCK BEARING CAP ASSEMBLY
    Stock Code:
    CKHS-PHS710B
    Stock Code:
    CKHS-PHS710K
    Stock Code:
    CKHS-PHS710N
    Stock Code:
    CKHS-PHS710R
    Stock Code:
    CKHS-PHS711B
    Stock Code:
    CKHS-PHS711R
    Stock Code:
    CKHS-PHS711S

    Chris King 1-1/8" Grip Lock Black Bearing Cap Assembly Bold Laser Mark Logo

    Chris King 1-1/8 GripLock Bearing Cap Assembly Pink

    If you already have a 1-1/8 inch NoThreadSet, this bearing cap converts it to GripLock.

    GripLock is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    If you already have a 1-1/8 inch NoThreadSet, this bearing cap converts it to GripLock.

    GripLock is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    Chris King 1-1/8" Black Bearing Cap Assembly Sotto Voce Logo

    If you already have a 1-1/8 inch NoThreadSet™, this bearing cap converts it to GripLock™!

    is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface

    Chris King 1-1/8" Silver Bearing Cap Assembly Sotto Voce Logo

    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    $70.11 (RRP)
    $70.11 (RRP)
    $70.11 (RRP)
    $70.11 (RRP)
    $54.20 (RRP)
    $54.20 (RRP)
    $54.20 (RRP)

    Add To Cart

  • CHRIS KING 2NUT CONVERSION KIT
    • CHRIS KING 2NUT CONVERSION KIT
    • CHRIS KING 2NUT CONVERSION KIT
    Stock Code:
    CKHS-PHS549K
    Stock Code:
    CKHS-PHS557S

    Chris King 2Nut Headset Conversion Kit 1 inch Pink Sotto Voce

    Kit includes lock nut, adjusting nut,and baseplate – all the pieces you'll
    need to convert from a NoThreadSet or GripNut to a 2Nut.

    Convert your Chris King® GripNut™ or NoThreadSet™ into a 2Nut™

    Stock Level:
    1
    Stock Level:
    1
    $55.80 (RRP)
    $55.80 (RRP)

    Add To Cart

  • CHRIS KING NTS BEARING CAP
    Stock Code:
    CKHS-PHS565B

    Chris King Bearing cap NTS Sotto Vocce 11/4 - 11/8 Devo Black

    Stock Level:
    2
    $70.11 (RRP)

    Add To Cart

  • CHRIS KING DROPSET1 41mm/52mm
    Stock Code:
    CKHS-FB2001
    Stock Code:
    CKHS-FB2011
    Stock Code:
    CKHS-FH2001
    Stock Code:
    CKHS-FJ2001
    Stock Code:
    CKHS-FM2001
    Stock Code:
    CKHS-FT2001
    Stock Code:
    CKHS-FN2001
    Stock Code:
    CKHS-FQ2001
    Stock Code:
    CKHS-FW2001

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - 41.0mm 45x45 upper bearing
    - 52.0mm 45x45 lower bearing
    - Compatible with our baseplate or integrated crown races

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house CERAMIC bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - 41.0mm 45x45 upper bearing
    - 52.0mm 45x45 lower bearing
    - Compatible with our baseplate or integrated crown races

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - 41.0mm 45x45 upper bearing
    - 52.0mm 45x45 lower bearing
    - Compatible with our baseplate or integrated crown races

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - 41.0mm 45x45 upper bearing
    - 52.0mm 45x45 lower bearing
    - Compatible with our baseplate or integrated crown races

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - 41.0mm 45x45 upper bearing
    - 52.0mm 45x45 lower bearing
    - Compatible with our baseplate or integrated crown races

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - 41.0mm 45x45 upper bearing
    - 52.0mm 45x45 lower bearing
    - Compatible with our baseplate or integrated crown races

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - 41.0mm 45x45 upper bearing
    - 52.0mm 45x45 lower bearing
    - Compatible with our baseplate or integrated crown races

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - 41.0mm 45x45 upper bearing
    - 52.0mm 45x45 lower bearing
    - Compatible with our baseplate or integrated crown races

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - 41.0mm 45x45 upper bearing
    - 52.0mm 45x45 lower bearing
    - Compatible with our baseplate or integrated crown races

    Stock Level:
    In Stock
    Stock Level:
    Out of Stock
    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Expected Date:
    01 April 2019
    $235.00 (RRP)
    $430.00 (RRP)
    $235.00 (RRP)
    $235.00 (RRP)
    $235.00 (RRP)
    $235.00 (RRP)
    $235.00 (RRP)
    $235.00 (RRP)
    $235.00 (RRP)

    Add To Cart

  • CHRIS KING DROPSET2 42mm/52mm
    Stock Code:
    CKHS-FB2002
    Stock Code:
    CKHS-FH2002
    Stock Code:
    CKHS-FJ2002
    Stock Code:
    CKHS-FQ2002
    Stock Code:
    CKHS-FW2002

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - Compatible with our baseplate or integrated crown races

    - 42mm 45x45 upper bearing
    - 52mm 45x45 lower bearing

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - Compatible with our baseplate or integrated crown races

    - 42mm 45x45 upper bearing
    - 52mm 45x45 lower bearing

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - Compatible with our baseplate or integrated crown races

    - 42mm 45x45 upper bearing
    - 52mm 45x45 lower bearing

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - Compatible with our baseplate or integrated crown races

    - 42mm 45x45 upper bearing
    - 52mm 45x45 lower bearing

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - Compatible with our baseplate or integrated crown races

    - 42mm 45x45 upper bearing
    - 52mm 45x45 lower bearing

    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Expected Date:
    01 April 2019
    $235.00 (RRP)
    $235.00 (RRP)
    $235.00 (RRP)
    $235.00 (RRP)
    $235.00 (RRP)

    Add To Cart

  • CHRIS KING DROPSET3 41mm/52mm (45x36)
    Stock Code:
    CKHS-FB2003
    Stock Code:
    CKHS-FH2003
    Stock Code:
    CKHS-FJ2003
    Stock Code:
    CKHS-FQ2003
    Stock Code:
    CKHS-FW2003

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - Compatible with our baseplate or integrated crown races

    - 41mm 45x45 upper bearing
    - 52mm 45x36 lower bearing

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - Compatible with our baseplate or integrated crown races

    - 41mm 45x45 upper bearing
    - 52mm 45x36 lower bearing

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - Compatible with our baseplate or integrated crown races

    - 41mm 45x45 upper bearing
    - 52mm 45x36 lower bearing

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - Compatible with our baseplate or integrated crown races

    - 41mm 45x45 upper bearing
    - 52mm 45x36 lower bearing

    Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our ten-year built-to-last warranty.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    -10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment
    - Compatible with our baseplate or integrated crown races

    - 41mm 45x45 upper bearing
    - 52mm 45x36 lower bearing

    Stock Level:
    In Stock
    Stock Level:
    1
    Stock Level:
    2
    Stock Level:
    1
    Stock Level:
    1
    $235.00 (RRP)
    $235.00 (RRP)
    $235.00 (RRP)
    $235.00 (RRP)
    $235.00 (RRP)

    Add To Cart

  • CHRIS KING GRIPNUT CONVERSION KIT
    Stock Code:
    CKHS-PHS548S

    Convert Chris King 1" 2Nut or 1" NoThreadSet into a Gripnut

    Stock Level:
    Out of Stock
    $82.90 (RRP)

    Add To Cart

  • CHRIS KING GRIPNUT 1-1/8"
    Stock Code:
    CKHS-HSK2S

    Our GripNut™ headset is designed for threaded forks that don’t require a cable hanger or additional spacers, allowing us to build a low stack height threaded headset with a unique collet locking system that stays securely adjusted.

    - Engineered, manufactured and assembled in Portland, Oregon USA
    - 10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Available in 9 beautifully anodized colors
    - GripNut™ proprietary collet retention system

    Stock Level:
    1
    $239.13 (RRP)

    Add To Cart

  • CHRIS KING GRIPNUT 1"
    Stock Code:
    CKHS-HSJ2S

    Our GripNut is the outstanding choice for bicycles with threaded forks used without headset spacers or cable hangers. This unique design features a threaded collet positioned inside the adjusting and lock nuts that firmly clamps the fork threads. The result is a headset system with incredible holding power and ease of adjustability.

    GripNut is ideal for heavy touring or rough riding conditions. Its design is also a welcome solution for problem forks with damaged or undersized threads and for threaded forks that have been cut too short.

    *SPECIAL NOTE*
    The GripNut™ design does not allow for the use of headset spacers or cable hangers. Please refer to the Chris King 2Nut™ if using spacers and/or hangers.

    Stock Level:
    1
    $239.13 (RRP)

    Add To Cart

  • CHRIS KING I1 44MM 1-1/8"
    Stock Code:
    CKHS-I1-FB0048
    Stock Code:
    CKHS-I1-FM0048
    Stock Code:
    CKHS-I1-FN0048
    Stock Code:
    CKHS-I1-FR0048
    Stock Code:
    CKHS-I1-FS0048

    Chris King Inset i1 1-1/8" Internal 44mm Griplock Traditional Laser Mark Logo

    Chris King® InSet™ is a low-stack style sealed bearing headset with
    press-in cups and bearings housed within the headtube allowing for an overall lower ride height.

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    You can buy with confidence from our Local Authorised webstores and retail outlets. Shipping is available Australia wide.

    A wealth of other information is also available on the Chris King® website.

    American made in USA (U.S.A.)

    Specifications:
    Steer tube OD: 1-1/8 inch

    Upper head tube ID (tolerances): 44.0mm (+0.00, -0.05)

    Lower head tube ID (tolerances): 44.0mm (+0.00, -0.05)

    Upper cup minimum ream depth: 8mm

    Lower cup minimum ream depth: 8mm

    Fork crown seat OD: 30.1mm

    Maximum press fit: 0.05mm

    Upper cup stack height (upper cup + bearing cap): 8.5mm

    Lower cup stack height (lower cup + baseplate): 4.2mm

    Stem cap screw torque: 1.7 Nm (15 in. lbs)

    Weight: 120 grams

    Chris King Inset i1 Mango 1-1/8" Internal 44mm Griplock Traditional Laser Mark Logo
    Chris King® InSet™ is a low-stack style sealed bearing headset with
    press-in cups and bearings housed within the headtube allowing for an overall lower ride height.

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    You can buy with confidence from our Local Authorised webstores and retail outlets. Shipping is available Australia wide.

    A wealth of other information is also available on the Chris King® website.

    American made in USA (U.S.A.)

    Specifications:
    Steer tube OD: 1-1/8 inch

    Upper head tube ID (tolerances): 44.0mm (+0.00, -0.05)

    Lower head tube ID (tolerances): 44.0mm (+0.00, -0.05)

    Upper cup minimum ream depth: 8mm

    Lower cup minimum ream depth: 8mm

    Fork crown seat OD: 30.1mm

    Maximum press fit: 0.05mm

    Upper cup stack height (upper cup + bearing cap): 8.5mm

    Lower cup stack height (lower cup + baseplate): 4.2mm

    Stem cap screw torque: 1.7 Nm (15 in. lbs)

    Weight: 120 grams

    Chris King Inset i1 Navy 1-1/8" Internal 44mm Griplock Traditional Laser Mark Logo
    Chris King® InSet™ is a low-stack style sealed bearing headset with
    press-in cups and bearings housed within the headtube allowing for an overall lower ride height.

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    You can buy with confidence from our Local Authorised webstores and retail outlets. Shipping is available Australia wide.

    A wealth of other information is also available on the Chris King® website.

    American made in USA (U.S.A.)

    Specifications:
    Steer tube OD: 1-1/8 inch

    Upper head tube ID (tolerances): 44.0mm (+0.00, -0.05)

    Lower head tube ID (tolerances): 44.0mm (+0.00, -0.05)

    Upper cup minimum ream depth: 8mm

    Lower cup minimum ream depth: 8mm

    Fork crown seat OD: 30.1mm

    Maximum press fit: 0.05mm

    Upper cup stack height (upper cup + bearing cap): 8.5mm

    Lower cup stack height (lower cup + baseplate): 4.2mm

    Stem cap screw torque: 1.7 Nm (15 in. lbs)

    Weight: 120 grams

    Chris King Inset i1 Red 1-1/8" Internal 44mm Griplock Traditional Laser Mark Logo
    Chris King® InSet™ is a low-stack style sealed bearing headset with
    press-in cups and bearings housed within the headtube allowing for an overall lower ride height.

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    You can buy with confidence from our Local Authorised webstores and retail outlets. Shipping is available Australia wide.

    A wealth of other information is also available on the Chris King® website.

    American made in USA (U.S.A.)

    Specifications:
    Steer tube OD: 1-1/8 inch

    Upper head tube ID (tolerances): 44.0mm (+0.00, -0.05)

    Lower head tube ID (tolerances): 44.0mm (+0.00, -0.05)

    Upper cup minimum ream depth: 8mm

    Lower cup minimum ream depth: 8mm

    Fork crown seat OD: 30.1mm

    Maximum press fit: 0.05mm

    Upper cup stack height (upper cup + bearing cap): 8.5mm

    Lower cup stack height (lower cup + baseplate): 4.2mm

    Stem cap screw torque: 1.7 Nm (15 in. lbs)

    Weight: 120 grams

    Chris King Inset i1 Silver 1-1/8" Internal 44mm Griplock Traditional Laser Mark Logo
    Chris King® InSet™ is a low-stack style sealed bearing headset with
    press-in cups and bearings housed within the headtube allowing for an overall lower ride height.

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    You can buy with confidence from our Local Authorised webstores and retail outlets. Shipping is available Australia wide.

    A wealth of other information is also available on the Chris King® website.

    American made in USA (U.S.A.)

    Specifications:
    Steer tube OD: 1-1/8 inch

    Upper head tube ID (tolerances): 44.0mm (+0.00, -0.05)

    Lower head tube ID (tolerances): 44.0mm (+0.00, -0.05)

    Upper cup minimum ream depth: 8mm

    Lower cup minimum ream depth: 8mm

    Fork crown seat OD: 30.1mm

    Maximum press fit: 0.05mm

    Upper cup stack height (upper cup + bearing cap): 8.5mm

    Lower cup stack height (lower cup + baseplate): 4.2mm

    Stem cap screw torque: 1.7 Nm (15 in. lbs)

    Weight: 120 grams

    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    2
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Expected Date:
    01 April 2019
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)

    Add To Cart

  • CHRIS KING I2 44-56MM 1-1/8-1.5" TAPERED
    Stock Code:
    CKHS-I2-FB0054
    Stock Code:
    CKHS-I2-FH0054
    Stock Code:
    CKHS-I2-FJ0054
    Stock Code:
    CKHS-I2-FL0054
    Stock Code:
    CKHS-I2-FM0054
    Stock Code:
    CKHS-I2-FN0054
    Stock Code:
    CKHS-I2-FF0054
    Stock Code:
    CKHS-I2-FR0054
    Stock Code:
    CKHS-I2-FS0054
    Stock Code:
    CKHS-I2-FT0054

    Chris King i2 Tapered 44/56mm headtube ( 1-1/8"/1.5" tapered fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)


    Specifications:
    Headset Type: Inset 2 Threadless GripLock™ InSet™

    Weight: 170 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8”

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 55.95 mm (+0, -.05)

    Upper cup minimum ream depth: 8 mm

    Lower cup minimum ream depth: 11 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1 mm

    Upper stack height: 8.2 mm

    Lower stack height: 4.2 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i2 Slate Tapered 44/56mm headtube ( 1-1/8"/1.5" tapered fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)


    Specifications:
    Headset Type: Inset 2 Threadless GripLock™ InSet™

    Weight: 170 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8”

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Chris King i2 Jet Tapered 44/56mm headtube ( 1-1/8"/1.5" tapered fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)


    Specifications:
    Headset Type: Inset 2 Threadless GripLock™ InSet™

    Weight: 170 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8”

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 55.95 mm (+0, -.05)

    Upper cup minimum ream depth: 8 mm

    Lower cup minimum ream depth: 11 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1 mm

    Upper stack height: 8.2 mm

    Lower stack height: 4.2 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i2 Pewter Tapered 44/56mm headtube ( 1-1/8"/1.5" tapered fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)


    Specifications:
    Headset Type: Inset 2 Threadless GripLock™ InSet™

    Weight: 170 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8”

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 55.95 mm (+0, -.05)

    Upper cup minimum ream depth: 8 mm

    Lower cup minimum ream depth: 11 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1 mm

    Upper stack height: 8.2 mm

    Lower stack height: 4.2 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i2 Mango Tapered 44/56mm headtube ( 1-1/8"/1.5" tapered fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)


    Specifications:
    Headset Type: Inset 2 Threadless GripLock™ InSet™

    Weight: 170 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8”

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 55.95 mm (+0, -.05)

    Upper cup minimum ream depth: 8 mm

    Lower cup minimum ream depth: 11 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1 mm

    Upper stack height: 8.2 mm

    Lower stack height: 4.2 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i2 Navy Tapered 44/56mm headtube ( 1-1/8"/1.5" tapered fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)


    Specifications:
    Headset Type: Inset 2 Threadless GripLock™ InSet™

    Weight: 170 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8”

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 55.95 mm (+0, -.05)

    Upper cup minimum ream depth: 8 mm

    Lower cup minimum ream depth: 11 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1 mm

    Upper stack height: 8.2 mm

    Lower stack height: 4.2 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i2 Tapered 44/56mm headtube ( 1-1/8"/1.5" tapered fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)


    Specifications:
    Headset Type: Inset 2 Threadless GripLock™ InSet™

    Weight: 170 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8”

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 55.95 mm (+0, -.05)

    Upper cup minimum ream depth: 8 mm

    Lower cup minimum ream depth: 11 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1 mm

    Upper stack height: 8.2 mm

    Lower stack height: 4.2 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i2 Red Tapered 44/56mm headtube ( 1-1/8"/1.5" tapered fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)


    Specifications:
    Headset Type: Inset 2 Threadless GripLock™ InSet™

    Weight: 170 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8”

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 55.95 mm (+0, -.05)

    Upper cup minimum ream depth: 8 mm

    Lower cup minimum ream depth: 11 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1 mm

    Upper stack height: 8.2 mm

    Lower stack height: 4.2 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i2 Silver Tapered 44/56mm headtube ( 1-1/8"/1.5" tapered fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)


    Specifications:
    Headset Type: Inset 2 Threadless GripLock™ InSet™

    Weight: 170 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8”

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 55.95 mm (+0, -.05)

    Upper cup minimum ream depth: 8 mm

    Lower cup minimum ream depth: 11 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1 mm

    Upper stack height: 8.2 mm

    Lower stack height: 4.2 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i2 Tapered 44/56mm headtube ( 1-1/8"/1.5" tapered fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)


    Specifications:
    Headset Type: Inset 2 Threadless GripLock™ InSet™

    Weight: 170 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8”

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 55.95 mm (+0, -.05)

    Upper cup minimum ream depth: 8 mm

    Lower cup minimum ream depth: 11 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1 mm

    Upper stack height: 8.2 mm

    Lower stack height: 4.2 mm

    Stem cap screw torque: 6-15 in. lbs

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    2
    Stock Level:
    Out of Stock
    Stock Level:
    In Stock
    Stock Level:
    1
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Expected Date:
    01 April 2019
    Expected Date:
    01 April 2019
    Expected Date:
    01 April 2019
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.00 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)

    Add To Cart

  • CHRIS KING I3 44-49MM 1-1/8">1.5" TAPERED
    Stock Code:
    CKHS-I3-FB0046
    Stock Code:
    CKHS-I3-FG0046
    Stock Code:
    CKHS-I3-FH0046
    Stock Code:
    CKHS-I3-FJ0046
    Stock Code:
    CKHS-I3-FM0046
    Stock Code:
    CKHS-I3-FN0046
    Stock Code:
    CKHS-I3-FR0046
    Stock Code:
    CKHS-I3-FS0046
    Stock Code:
    CKHS-I3-FT0046

    Chris King i3 Tapered 44/49mm headtube (1-1/8"/1.5" Tapered Steerer fork) Griplock

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    A wealth of other information is available on the Chris King® website.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA (U.S.A.)


    Specifications:
    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 49.60 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 15 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i3 Green Tapered 44/49mm headtube (1-1/8"/1.5" Tapered Steerer fork) Griplock

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)

    Specifications:
    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 49.60 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 15 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i3 Slate Tapered 44/49mm headtube (1-1/8"/1.5" Tapered Steerer fork) Griplock

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    A wealth of other information is available on the Chris King® website.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA (U.S.A.)


    Specifications:
    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 49.60 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 15 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i3 Jet Tapered 44/49mm headtube (1-1/8"/1.5" Tapered Steerer fork) Griplock

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    A wealth of other information is available on the Chris King® website.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA (U.S.A.)


    Specifications:
    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 49.60 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 15 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i3 Mango Tapered 44/49mm headtube (1-1/8"/1.5" Tapered Steerer fork) Griplock

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)

    Specifications:
    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 49.60 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 15 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i3 Navy Tapered 44/49mm headtube (1-1/8"/1.5" Tapered Steerer fork) Griplock

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)


    Specifications:
    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 49.60 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 15 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i3 Red Tapered 44/49mm headtube (1-1/8"/1.5" Tapered Steerer fork) Griplock

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)


    Specifications:
    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 49.60 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 15 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i3 Silver Tapered 44/49mm headtube (1-1/8"/1.5" Tapered Steerer fork) Griplock

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)

    Specifications:
    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 49.60 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 15 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i3 Tapered 44/49mm headtube (1-1/8"/1.5" Tapered Steerer fork) Griplock

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    This Chris King® Inset™ headset is a low-stack threadless headset for newer model frames with oversized head tubes. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    This Inset™ headset fits bikes from a number of manufacturers. As long as your bike doesn’t require an integrated headset and matches precise specifications (see specification chart below) this Inset™ headset will perform beautifully on your bike.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    You can buy with confidence from our Local Authorised webstores and retail outlets. They will provide Fast, Free, Reliable Shipping Australia wide.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)

    Specifications:
    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 49.60 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 15 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Stock Level:
    2
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    In Stock
    Stock Level:
    2
    Expected Date:
    01 April 2019
    Expected Date:
    01 April 2019
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)

    Add To Cart

  • CHRIS KING I4 49MM 1.5-1-1/8"
    Stock Code:
    CKHS-I4-HSI4B
    Stock Code:
    CKHS-I4-HSI4R
    Stock Code:
    CKHS-I4-HSI4S
    Stock Code:
    CKHS-I4-HSI4T

    Chris King Inset i4 1.5"/49mm Frame suit 1-1/8" fork steerer GripLock

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    InSet™ Model 4 with GripLock™ bearing cap is intended for 1 1-8” steerer dual crown forks, fits bikes from a number of manufacturers and is for long travel applications. As long as your bike doesn’t require an integrated headset this Inset™ headset will perform beautifully on your bike.

    This Chris King® Inset™ headset is a low-stack threadless headset. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)

    Specifications:
    Warranty: 10 years

    Steer tube OD: 1-1/8 inch

    Upper head tube ID (tolerances): 49.61mm (+0, -.04)

    Lower head tube ID (tolerances): 49.61mm (+0, -.04)

    Upper cup minimum ream depth: 16mm

    Lower cup minimum ream depth: 16mm

    Fork crown seat OD: n/a

    Maximum press fit: 0.075mm

    Upper stack height (upper cup + bearing cap): 8.0mm

    Lower stack height (lower cup + baseplate): 4.0mm

    Stem cap screw torque: 15 in. lbs

    Weight:120 grams

    Chris King Inset i4 Red 1.5"/49mm Frame suit 1-1/8" fork steerer GripLock

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    InSet™ Model 4 with GripLock™ bearing cap is intended for 1 1-8” steerer dual crown forks, fits bikes from a number of manufacturers and is for long travel applications. As long as your bike doesn’t require an integrated headset this Inset™ headset will perform beautifully on your bike.

    This Chris King® Inset™ headset is a low-stack threadless headset. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)

    Specifications:
    Warranty: 10 years

    Steer tube OD: 1-1/8 inch

    Upper head tube ID (tolerances): 49.61mm (+0, -.04)

    Lower head tube ID (tolerances): 49.61mm (+0, -.04)

    Upper cup minimum ream depth: 16mm

    Lower cup minimum ream depth: 16mm

    Fork crown seat OD: n/a

    Maximum press fit: 0.075mm

    Upper stack height (upper cup + bearing cap): 8.0mm

    Lower stack height (lower cup + baseplate): 4.0mm

    Stem cap screw torque: 15 in. lbs

    Weight:120 grams

    Chris King Inset i4 Silver 1.5"/49mm Frame suit 1-1/8" fork steerer GripLock
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    InSet™ Model 4 with GripLock™ bearing cap is intended for 1 1-8” steerer dual crown forks, fits bikes from a number of manufacturers and is for long travel applications. As long as your bike doesn’t require an integrated headset this Inset™ headset will perform beautifully on your bike.

    This Chris King® Inset™ headset is a low-stack threadless headset. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)

    Specifications:
    Warranty: 10 years

    Steer tube OD: 1-1/8 inch

    Upper head tube ID (tolerances): 49.61mm (+0, -.04)

    Lower head tube ID (tolerances): 49.61mm (+0, -.04)

    Upper cup minimum ream depth: 16mm

    Lower cup minimum ream depth: 16mm

    Fork crown seat OD: n/a

    Maximum press fit: 0.075mm

    Upper stack height (upper cup + bearing cap): 8.0mm

    Lower stack height (lower cup + baseplate): 4.0mm

    Stem cap screw torque: 15 in. lbs

    Weight:120 grams

    Chris King Inset i4 Black 1.5"/49mm Frame suit 1-1/8" fork steerer GripLock

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    InSet™ Model 4 with GripLock™ bearing cap is intended for 1 1-8” steerer dual crown forks, fits bikes from a number of manufacturers and is for long travel applications. As long as your bike doesn’t require an integrated headset this Inset™ headset will perform beautifully on your bike.

    This Chris King® Inset™ headset is a low-stack threadless headset. Like other Chris King® headsets, it features user-serviceable stainless steel bearings. Chris King’s bearings are legendary because their design gives you years of trouble free performance with only routine maintenance.

    It is absolutely essential that proper reaming and facing of your bike’s head tube be performed by a qualified mechanic during installation of this Inset™ headset. Also, please be aware that modifying a frame to make the Inset™ fit is not a proper method of installation. The proper installation of this headset is so important that you are encouraged to choose another headset if you are not able to have this Inset™ headset properly installed. We highly recommend that you carefully check your bike's specifications before ordering this headset and contact your bike manufacturer if necessary. Please note that we are unable to accept for return, exchange, or credit any headset that has been installed or has been attempted to be installed. This insures that all of our customers receive only pristine, brand new components. Thank you for your understanding. Once properly installed, this Chris King® Inset™ headset will give you years of world class performance.

    A wealth of other information is available on the Chris King® website.

    American made in USA (U.S.A.)

    Specifications:
    Warranty: 10 years

    Steer tube OD: 1-1/8 inch

    Upper head tube ID (tolerances): 49.61mm (+0, -.04)

    Lower head tube ID (tolerances): 49.61mm (+0, -.04)

    Upper cup minimum ream depth: 16mm

    Lower cup minimum ream depth: 16mm

    Fork crown seat OD: n/a

    Maximum press fit: 0.075mm

    Upper stack height (upper cup + bearing cap): 8.0mm

    Lower stack height (lower cup + baseplate): 4.0mm

    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    In Stock
    Stock Level:
    2
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)

    Add To Cart

  • CHRIS KING I5 49MM 1-1/8-1.5" TAPERED
    Stock Code:
    CKHS-I5-HSI5B
    Stock Code:
    CKHS-I5-HSI5N
    Stock Code:
    CKHS-I5-HSI5R
    Stock Code:
    CKHS-I5-HSI5S

    Chris King Inset i5 49mm (1-1/8"/1.5" tapered steerer Fork) Griplock Trad Bold Logo

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    A wealth of other information is available on the Chris King® website.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA (U.S.A.)

    Specifications:

    Headset Type: Threadless InSet™ GripLock™ I5

    Logo Type: Bright Silver Logo

    Warranty: 10 years

    Upper head tube ID (tolerances): 49.61mm (+0, -.04)

    Lower head tube ID (tolerances): 49.61mm (+0, -.04)

    Upper cup minimum ream depth: 16mm

    Lower cup minimum ream depth: 20mm

    Fork crown seat OD: 30.1 / 39.8 mm 1

    Maximum press fit: 0.075mm

    Upper stack height (upper cup + bearing cap): 8.0mm

    Lower stack height (lower cup + baseplate): 4.0mm

    Stem cap screw torque: 15 in. lbs

    Weight: 220 grams (with bolt and StarNut)

    1 30.1 mm fork crown seat OD for 1/1-8” steer tube. This setup requires a 1.5” to 1-1/8” Devolution baseplate, sold separately.

    Chris King Inset i5 Navy 49mm (1-1/8"/1.5" tapered steerer Fork) Griplock Trad Bold Logo

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    A wealth of other information is available on the Chris King® website.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA (U.S.A.)

    Specifications:

    Headset Type: Threadless InSet™ GripLock™ I5

    Logo Type: Bright Silver Logo

    Warranty: 10 years

    Upper head tube ID (tolerances): 49.61mm (+0, -.04)

    Lower head tube ID (tolerances): 49.61mm (+0, -.04)

    Upper cup minimum ream depth: 16mm

    Lower cup minimum ream depth: 20mm

    Fork crown seat OD: 30.1 / 39.8 mm 1

    Maximum press fit: 0.075mm

    Upper stack height (upper cup + bearing cap): 8.0mm

    Lower stack height (lower cup + baseplate): 4.0mm

    Stem cap screw torque: 15 in. lbs

    Weight: 220 grams (with bolt and StarNut)

    1 30.1 mm fork crown seat OD for 1/1-8” steer tube. This setup requires a 1.5” to 1-1/8” Devolution baseplate, sold separately.

    Chris King Inset i5 Red 49mm (1-1/8"/1.5" tapered steerer Fork) Griplock Trad Bold Logo
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    A wealth of other information is available on the Chris King® website.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA (U.S.A.)

    Specifications:

    Headset Type: Threadless InSet™ GripLock™ I5

    Logo Type: Bright Silver Logo

    Warranty: 10 years

    Upper head tube ID (tolerances): 49.61mm (+0, -.04)

    Lower head tube ID (tolerances): 49.61mm (+0, -.04)

    Upper cup minimum ream depth: 16mm

    Lower cup minimum ream depth: 20mm

    Fork crown seat OD: 30.1 / 39.8 mm 1

    Maximum press fit: 0.075mm

    Upper stack height (upper cup + bearing cap): 8.0mm

    Lower stack height (lower cup + baseplate): 4.0mm

    Stem cap screw torque: 15 in. lbs

    Weight: 220 grams (with bolt and StarNut)

    1 30.1 mm fork crown seat OD for 1/1-8” steer tube. This setup requires a 1.5” to 1-1/8” Devolution baseplate, sold separately.

    Chris King Inset i5 Silver 49mm (1-1/8"/1.5" tapered steerer Fork) Griplock Trad Bold Logo
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    A wealth of other information is available on the Chris King® website.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA (U.S.A.)

    Specifications:

    Headset Type: Threadless InSet™ GripLock™ I5

    Logo Type: Bright Silver Logo

    Warranty: 10 years

    Upper head tube ID (tolerances): 49.61mm (+0, -.04)

    Lower head tube ID (tolerances): 49.61mm (+0, -.04)

    Upper cup minimum ream depth: 16mm

    Lower cup minimum ream depth: 20mm

    Fork crown seat OD: 30.1 / 39.8 mm 1

    Maximum press fit: 0.075mm

    Upper stack height (upper cup + bearing cap): 8.0mm

    Lower stack height (lower cup + baseplate): 4.0mm

    Stem cap screw torque: 15 in. lbs

    Weight: 220 grams (with bolt and StarNut)

    1 30.1 mm fork crown seat OD for 1/1-8” steer tube. This setup requires a 1.5” to 1-1/8” Devolution baseplate, sold separately.

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    Out of Stock
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)

    Add To Cart

  • CHRIS KING I7 44MM 1-1/8-1.5" TAPERED
    Stock Code:
    CKHS-I7-FB0058
    Stock Code:
    CKHS-I7-FH0058
    Stock Code:
    CKHS-I7-FJ0058
    Stock Code:
    CKHS-I7-FM0058
    Stock Code:
    CKHS-I7-FN0058
    Stock Code:
    CKHS-I7-FR0058
    Stock Code:
    CKHS-I7-FS0058
    Stock Code:
    CKHS-I7-FT0058
    Stock Code:
    CKHS-I7-FF0058

    Chris King i7 Tapered 44mm Headtube fits 1-1/8"/-1.5" tapered Steerer (convert a 44mm 1-1/8" headtube to work with a tapered steerer fork)

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA

    Logo Type: Bright Silver Logo

    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 10 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    We created our InSet™ family of headsets by applying the legendary form and function of Chris King headsets to fit solutions for a wide variety of tapered and oversized headtubes and steerer tubes being utilized in modern bicycle design.

    The Chris King InSet™ 7 combines seamless design and legendary quality in a 44mm headset with an external lower cup that is a precision headset option for your 1.5” tapered steerer fork. Our InSet™ 7 is equipped with our exclusive built-in-house bearings and our patented GripLock® system for precise fit and function.

    Engineered, manufactured and assembled in Portland, Oregon USA
    10-year built-to-last warranty
    Legendary made-in-house bearings
    Patented GripLock® retention design for exclusively dependable headset adjustment
    Available in 9 beautifully anodized colors
    Responsibly lightweight
    Designed specifically for a 44mm straight headtube and a 1-1/8” to 1.5” tapered steerer tube
    Available in Matte Jet, Matte Slate, and Limited Edition Matte Emerald

    We created our InSet™ family of headsets by applying the legendary form and function of Chris King headsets to fit solutions for a wide variety of tapered and oversized headtubes and steerer tubes being utilized in modern bicycle design.

    The Chris King InSet™ 7 combines seamless design and legendary quality in a 44mm headset with an external lower cup that is a precision headset option for your 1.5” tapered steerer fork. Our InSet™ 7 is equipped with our exclusive built-in-house bearings and our patented GripLock® system for precise fit and function.

    Engineered, manufactured and assembled in Portland, Oregon USA
    10-year built-to-last warranty
    Legendary made-in-house bearings
    Patented GripLock® retention design for exclusively dependable headset adjustment
    Available in 9 beautifully anodized colors
    Responsibly lightweight
    Designed specifically for a 44mm straight headtube and a 1-1/8” to 1.5” tapered steerer tube
    Available in Matte Jet, Matte Slate, and Limited Edition Matte Emerald

    Chris King i7 Mango Tapered 44mm Headtube fits 1-1/8"/-1.5" tapered Steerer (convert a 44mm 1-1/8" headtube to work with a tapered steerer fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    A wealth of other information is available on the Chris King® website.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA

    Logo Type

    Bright Silver Logo

    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 10 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i7 Navy Tapered 44mm Headtube fits 1-1/8"/-1.5" tapered Steerer (convert a 44mm 1-1/8" headtube to work with a tapered steerer fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    A wealth of other information is available on the Chris King® website.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA

    Logo Type

    Bright Silver Logo

    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 10 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i7 Red Tapered 44mm Headtube fits 1-1/8"/-1.5" tapered Steerer (convert a 44mm 1-1/8" headtube to work with a tapered steerer fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    A wealth of other information is available on the Chris King® website.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA

    Logo Type

    Bright Silver Logo

    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 10 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i7 Silver Tapered 44mm Headtube fits 1-1/8"/-1.5" tapered Steerer (convert a 44mm 1-1/8" headtube to work with a tapered steerer fork)
    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    A wealth of other information is available on the Chris King® website.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA

    Logo Type

    Bright Silver Logo

    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 10 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i7 Turquoise Tapered 44mm Headtube fits 1-1/8"/-1.5" tapered Steerer (convert a 44mm 1-1/8" headtube to work with a tapered steerer fork)

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    A wealth of other information is available on the Chris King® website.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA

    Logo Type

    Bright Silver Logo

    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 10 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Chris King i7 Tapered 44mm Headtube fits 1-1/8"/-1.5" tapered Steerer (convert a 44mm 1-1/8" headtube to work with a tapered steerer fork)

    This Chris King® threadless headset features a bearing cap design called GripLock™. GripLock™ is a multi-piece bearing cap that utilizes a split ring that improves steerer tube interface.

    We guarantee to you that each Chris King® bicycle component you buy from us is absolutely brand new with full warranty, and that we are an authorized Chris King® dealer.

    American made in USA

    Logo Type: Bright Silver Logo

    Weight: 150 grams

    Warranty: 10 years

    Steer tube OD: 1-1/8” to 1.5” tapered

    Upper head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Lower head tube bore ID (tolerances): 44.0 mm (+0, -.05)

    Upper head tube ream depth: 10 mm

    Lower head tube ream depth: 10 mm

    Fork crown seat OD: 39.8 mm

    Press fit tolerance: .1mm

    Upper stack height: 8.46 mm

    Lower stack height: 14.8 mm

    Stem cap screw torque: 6-15 in. lbs

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Expected Date:
    01 April 2019
    Expected Date:
    01 April 2019
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)

    Add To Cart

  • CHRIS KING I8 44MM 1-1/8">1-1/4" TAPERED
    Stock Code:
    CKHS-I8-FB0132
    Stock Code:
    CKHS-I8-FN0132
    Stock Code:
    CKHS-I8-FR0132
    Stock Code:
    CKHS-I8-FS0132
    Stock Code:
    CKHS-I8-FF0132

    Chris King InSet 8 is a low-stack style sealed bearing headset with
    press-in cups and bearings housed within the headtube allowing for an overall lower ride height.

    This Chris King threadless headset features Chris King's GripLock bearing cap that utilizes a split ring design that optimizes the steerer tube interface.

    - Upper cup: 44mm InSet
    - Lower cup: 44mm external
    - Steerer tube: Tapered 1-1/8 to 1-1/4*

    *Can swap base plate for straight 1-1/8 steerer

    Chris King InSet 8 is a low-stack style sealed bearing headset with
    press-in cups and bearings housed within the headtube allowing for an overall lower ride height.

    This Chris King threadless headset features Chris King's GripLock bearing cap that utilizes a split ring design that optimizes the steerer tube interface.

    - Upper cup: 44mm InSet
    - Lower cup: 44mm external
    - Steerer tube: Tapered 1-1/8 to 1-1/4*

    *Can swap base plate for straight 1-1/8 steerer

    Chris King InSet 8 is a low-stack style sealed bearing headset with
    press-in cups and bearings housed within the headtube allowing for an overall lower ride height.

    This Chris King threadless headset features Chris King's GripLock bearing cap that utilizes a split ring design that optimizes the steerer tube interface.

    - Upper cup: 44mm InSet
    - Lower cup: 44mm external
    - Steerer tube: Tapered 1-1/8 to 1-1/4*

    *Can swap base plate for straight 1-1/8 steerer

    Chris King InSet 8 is a low-stack style sealed bearing headset with
    press-in cups and bearings housed within the headtube allowing for an overall lower ride height.

    This Chris King threadless headset features Chris King's GripLock bearing cap that utilizes a split ring design that optimizes the steerer tube interface.

    - Upper cup: 44mm InSet
    - Lower cup: 44mm external
    - Steerer tube: Tapered 1-1/8 to 1-1/4*

    *Can swap base plate for straight 1-1/8 steerer

    Chris King InSet 8 is a low-stack style sealed bearing headset with
    press-in cups and bearings housed within the headtube allowing for an overall lower ride height.

    This Chris King threadless headset features Chris King's GripLock bearing cap that utilizes a split ring design that optimizes the steerer tube interface.

    - Upper cup: 44mm InSet
    - Lower cup: 44mm external
    - Steerer tube: Tapered 1-1/8 to 1-1/4*

    *Can swap base plate for straight 1-1/8 steerer

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    1
    Expected Date:
    01 April 2019
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)
    $271.01 (RRP)

    Add To Cart

  • CHRIS KING INSET BEARING CAP
    • CHRIS KING INSET BEARING CAP
    • CHRIS KING INSET BEARING CAP
    Stock Code:
    CKHS-PHS714B
    Stock Code:
    CKHS-PHS714R
    Stock Code:
    CKHS-PHS714S
    Stock Code:
    CKHS-PHS720B

    Chris King InSet GripLock Bearing Cap 1-1/8 (44mm) for InSet 1, 2, 3, 7, 8 Black

    Chris King InSet GripLock Bearing Cap 1-1/8 (44mm) for InSet 1, 2, 3, 7, 8 Red

    Chris King InSet GripLock Bearing Cap 1-1/8 (44mm) for InSet 1, 2, 3, 7, 8 Silver

    Chris King InSet Bearing Cap- 1-1/8 inch (49mm) for InSet 4, 5, Black

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    $54.20 (RRP)
    $54.20 (RRP)
    $54.20 (RRP)
    $54.20 (RRP)

    Add To Cart

  • CHRIS KING NTS 1"
    Stock Code:
    CKHS-1A-HSA1B
    Stock Code:
    CKHS-1A-HSJ1B
    Stock Code:
    CKHS-1A-HSJ1C
    Stock Code:
    CKHS-1A-HSJ1N
    Stock Code:
    CKHS-1A-HSJ1R
    Stock Code:
    CKHS-1A-HSJ1S

    Chris King NoThreadSet 1" Bold Laser mark griplock

    - For 30.1mm ID headtube
    - 26.4mm Crown Race

    Chris King NoThreadSet Black 1" Sotto Voce griplock

    - For 30.1mm ID headtube
    - 26.4mm Crown Race

    Chris King NoThreadSet Brown 1" Sotto Voce griplock

    - For 30.1mm ID headtube
    - 26.4mm Crown Race

    Chris King NoThreadSet Navy 1" Sotto Voce griplock

    - For 30.1mm ID headtube
    - 26.4mm Crown Race

    Chris King NoThreadSet Red 1" Sotto Voce griplock

    - For 30.1mm ID headtube
    - 26.4mm Crown Race

    Chris King NoThreadSet Silver 1" Sotto Voce griplock

    - For 30.1mm ID headtube
    - 26.4mm Crown Race

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Expected Date:
    01 April 2019
    Expected Date:
    01 April 2019
    $239.13 (RRP)
    $239.13 (RRP)
    $239.13 (RRP)
    $239.13 (RRP)
    $239.13 (RRP)
    $239.13 (RRP)

    Add To Cart

  • CHRIS KING NTS 1-1/4"
    Stock Code:
    CKHS-14-HSL1B
    Stock Code:
    CKHS-14-HSL1S

    Chris King NoThreadSet 1-1/4" (36.9mm Headtube) Sotto Voco

    Chris King NoThreadSet Silver 1-1/4" (36.9mm Headtube) Griplock Sotto Voco

    Stock Level:
    1
    Stock Level:
    2
    $233.30 (RRP)
    $233.30 (RRP)

    Add To Cart

  • CHRIS KING NTS 1-1/8"
    Stock Code:
    CKHS-44-FB0044
    Stock Code:
    CKHS-44-FH0044
    Stock Code:
    CKHS-44-FJ0044
    Stock Code:
    CKHS-44-FM0044
    Stock Code:
    CKHS-44-FN0044
    Stock Code:
    CKHS-44-FR0044
    Stock Code:
    CKHS-44-FT0044
    Stock Code:
    CKHS-44-FY0044
    Stock Code:
    CKHS-45-FB0045
    Stock Code:
    CKHS-45-FM0045
    Stock Code:
    CKHS-45-FN0045
    Stock Code:
    CKHS-45-FR0045
    Stock Code:
    CKHS-45-FS0045
    Stock Code:
    CKHS-44-FG0044

    The NoThreadSet™ is built to be precise and dependable and sets the standard for quality headset function delivering precision performance to numerous world champions, grand tour winners, and aspiring riders around the world.

    - Fits 34mm headtube
    - Engineered, manufactured and assembled in Portland, Oregon USA
    - 10-year built-to-last warranty
    - Legendary made-in-house bearings
    - Patented GripLock® retention design for exclusively reliable headset adjustment (1-1/8” only)
    - Available in 9 beautifully anodized colors in both bold and sotto voce marking options
    - Responsibly lightweight

    Our NoThreadSet™ is built to be precise and dependable and sets the standard for quality headset function delivering precision performance to numerous world champions, grand tour winners, and aspiring riders around the world.

    Engineered, manufactured and assembled in Portland, Oregon USA
    10-year built-to-last warranty
    Legendary made-in-house bearings
    Patented GripLock® retention design for exclusively reliable headset adjustment (1-1/8” only)

    Our NoThreadSet™ is built to be precise and dependable and sets the standard for quality headset function delivering precision performance to numerous world champions, grand tour winners, and aspiring riders around the world.

    Engineered, manufactured and assembled in Portland, Oregon USA
    10-year built-to-last warranty
    Legendary made-in-house bearings
    Patented GripLock® retention design for exclusively reliable headset adjustment (1-1/8” only)

    Chris King NoThreadset Mango 1-1/8" Griplock Traditional Bold Laser Mark Logo

    Chris King NoThreadset Navy 1-1/8" Griplock Traditional Bold Laser Mark Logo

    Chris King NoThreadset Red 1-1/8" Griplock Traditional Bold Laser Mark Logo

    Chris King NoThreadset Red 1-1/8" Griplock Traditional Bold Laser Mark Logo

    Chris King NoThreadset Gold 1-1/8" Griplock Traditional Bold Laser Mark Logo

    Chris King NoThreadSet Black 1-1/8" Griplock Sotto Voco

    Chris King NoThreadset Mango 1-1/8" Griplock Sotto Voco

    Chris King NoThreadSet Navy 1-1/8" Griplock Sotto Voco

    Chris King NoThreadset Red 1-1/8" Griplock Sotto Voco

    Chris King NoThreadset Silver 1-1/8" Griplock Sotto Voco

    Chris King NoThreadSet Green 1-1/8" Griplock Traditional Bold Laser Mark Logo

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    2
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Expected Date:
    01 April 2019
    Expected Date:
    01 April 2019
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)
    $245.51 (RRP)

    Add To Cart