Bearings

Bearings
Brand
  • Enduro DRF 3041 30x41x11
    Stock Code:
    ENBG-DRF3041LLBBO

    DRF-3041-LLB-BO Enduro Bike Bearing 30x41/44x11

    BO (Black Oxide) bearings get an additional Magnetite treatment for hardness, rust resistance and even more reliability.

    Enduro Abec 3 Specification:

    Rubber seals - "LLB" is a double-lip type seal making light contact and also rides in a groove making a labyrinth seal.


    Grade 10 Chromium Steel Balls:
    High precision balls are within 10/1,000,000? round, twice as round as the industry standard, at it’s highest level.

    52100 High Carbon Chromium Alloy Races:
    Vacuum de-gassed process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-3 precision and noiseless movement.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $29.00 (RRP)
  • Enduro F688 8x16x5 Flanged
    Stock Code:
    ENBG-BB-F688-2RS
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $13.30 (RRP)

    Add To Cart

  • Enduro KP5A
    Stock Code:
    ENBG-BB-KP5A
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $18.68 (RRP)

    Add To Cart

  • Enduro Lefty Headset bearing 50.8mm SS
    Stock Code:
    ENBG-ACB-B543-LLB-SS

    CANNONDALE LEFTY / HEADSHOK HEADSET BEARING

    Drop-in replacement B-543 bearing for Cannondale Headshok and Lefty headsets. Compatible Cannondale frames with either removable headset cups or drop-in, direct-fit bearings.

    - Stainless balls with stainless races
    - 50.8mm OD x 39.68mm ID x 7.14mm Width
    - Same as Cannondale part # HD169
    - BEARINGS SOLD INDIVIDUALLY

    Enduro Bearings manufactures some series of bearings using 440C stainless steel balls and races. This material provides maximum corrosion resistance in applications and environments where critical. Depending on the application, they are designed to ABEC-3 or ABEC-5 tolerances. Stainless steel has 20% less load capacity than the 52100 chromium steel, used in most of our bearings, but with far superior corrosion resistance.

    When the rain won’t go away, and your bicycle is more often used as a boat rather than a land craft, you may want to consider 440C stainless steel bearings. While a little softer than chromium bearing steel, 440C stainless steel is a good alternative in constant wet conditions, or where sweat becomes a problem such as headset bearings.

    Enduro Bearings uses LLB* type seals and CRC Marine Grease in these bearings to additionally water proof against the elements.

    * Enduro LLB Type Seals: Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $66.55 (RRP)

    Add To Cart

  • Enduro M8x22/24x8/7
    Stock Code:
    ENBG-BB-608-FE2RS-SP

    Enduro Abec 3 Specification:

    Grade 10 Chromium Steel Balls:
    High precision balls are within 10/1,000,000? round, twice as round as the industry standard, at it’s highest level.

    52100 High Carbon Chromium Alloy Races:
    Vacuum de-gassed process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-3 precision and noiseless movement.

    Riveted Steel Retainer for toughness, ABEC-3 tolerances and noise tested, C-3 or C-N Internal Clearance

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $14.66 (RRP)

    Add To Cart

  • Enduro MR15267 15x26x7 ABEC 3
    Stock Code:
    ENBG-BB-MR15267-LLB

    Enduro LLU Type Seals

    Similar to the LLB type seal, LLU is a full contact, dual lip seal riding in a groove on the inner race. With more sealing pressure, these are ideal for pivots or headsets that continually come in contact with dirt, sweat, and dust. The increased seal pressure and 2 lips help retain the 90% grease fill we use on these bearings to better displace any moisture and continually lubricate the balls and races.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $13.30 (RRP)

    Add To Cart

  • Enduro MR15267 15x26x7 ABEC 5
    Stock Code:
    ENBG-BB-MR15267-LLU

    Enduro LLB Type Seals

    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $18.90 (RRP)

    Add To Cart

  • Enduro MR15267 15x26x7 XD15
    Stock Code:
    ENBG-BB-CXD-MR15267

    Want to make your bike faster than any other? Had enough of servicing your ceramic bearings so that they will survive another rainy day race? Would you rather have a bottom bracket outlast your frameset? Then you have arrived at the solution. XD-15 ceramic bearings have it all - hands down the speediest, and longest lasting ceramic bearing available on the market. Nitrogen steel is the secret, precision machined and ground to ABEC-5 tolerances at our facility in Gilroy, California. Voted “Hands down the best bottom bracket we have ever tested” from Bike Radar, you can find out why. These bearings spin with the very least resistance of anything we have developed to date featuring oversized Grade 3 Silicon Nitride balls. On top of this, they will be spinning with the same ease one year or even two years from now, with longer intervals between servicing. No one else in the bicycle industry offers this combination of speed and durability: XD-15 bearings for wheels, bottom brackets, and drive train.

    - XD-15 are Corrosion Free, little serving required!

    - Si3N4 Grade 3 Balls

    - Silicone Seals allow Faster spinning

    - New Limited Warranty

    - Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $209.85 (RRP)
  • Enduro MR15307 15x30x7 ABEC 5
    Stock Code:
    ENBG-BB-MR-15307-LLU
    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    POA
  • Enduro MR17286 17x28x6 MAX
    Stock Code:
    ENBG-BB-MR17286-LLU-MAX

    Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

    Enduro LLU Type Seals

    Similar to the LLB type seal, LLU is a full contact, dual lip seal riding in a groove on the inner race. With more sealing pressure, these are ideal for pivots or headsets that continually come in contact with dirt, sweat, and dust. The increased seal pressure and 2 lips help retain the 90% grease fill we use on these bearings to better displace any moisture and continually lubricate the balls and races.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $13.98 (RRP)

    Add To Cart

  • Enduro MR17287 17x28x7 ABEC 3
    Stock Code:
    ENBG-BB-MR-17287-LLB

    ABEC 3 precision bearings with Grade 10 steel balls and cryogenically treated chromium steel races.

    Enduro LLB Type Seals

    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Size: 17x28x7

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $13.98 (RRP)

    Add To Cart

  • Enduro MR17287 17x28x7 ABEC 5
    Stock Code:
    ENBG-BB-MR17287-LBB

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $17.88 (RRP)

    Add To Cart

  • Enduro MR18307 18x30x7 ABEC 3
    Stock Code:
    ENBG-BB-MR-18307-LLB

    ABEC 3 precision bearings with Grade 10 steel balls and cryogenically treated chromium steel races.

    Enduro LLB Type Seals

    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $9.79 (RRP)

    Add To Cart

  • Enduro MR18307 18x30x7 ABEC 5
    Stock Code:
    ENBG-BB-MR18307-LBB

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $15.45 (RRP)

    Add To Cart

  • Enduro MR22378 22x37x8 ABEC 5
    Stock Code:
    ENBG-BB-MR22378LLB

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $19.24 (RRP)

    Add To Cart

  • Enduro MR23327 23x32x7 ABEC 3
    Stock Code:
    ENBG-BB-MR-23327-LLB

    ABEC 3 precision bearings with Grade 10 steel balls and cryogenically treated chromium steel races.

    Enduro LLB Type Seals

    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $15.73 (RRP)

    Add To Cart

  • Enduro R6 3/8x7/8x9/32  ABEC 5
    Stock Code:
    ENBG-BB-R6-SRS

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro SRS Type Seals: Featured on many of our ABEC 5 level bearings, these seals employ a snap ring that can be removed with a small knife for quick and easy servicing. These seals can be removed with no danger of bending them while performing lubrication service, ensuring they will spin as smoothly after. The single sealing lip makes contact on a step machined into the inner race, and sealing as an axial face seal. This type of seal configurations has extremely low rolling resistance and speed, while being an effective barrier against dirt and water.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $14.66 (RRP)

    Add To Cart

  • Enduro R8 1/2x1-1/8x5/16 ABEC 5
    Stock Code:
    ENBG-BB-R8-VV

    - Grade 5 Chromium Steel Balls
    - High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.
    - 52100 High Carbon Chromium Alloy Races
    - Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.
    - Graphite/Nylon Ball Retainers
    - Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

    The ABEC 5 Standard
    To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

    C-3 Clearance
    This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

    Enduro LLB Type Seals
    Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

    Stock Level:
    Out Of Stock
    Stock Level:
    Out of Stock
    $11.09 (RRP)
  • Wheels MFG 5/16x12 B/Retain 1pce BB 10pe
    Stock Code:
    WMBG-BALLRET5/16X12

    Wheels MFG 5/16"x12 Bearing Retainer 10 per bag Suit BMX 1 Piece Bottom Bracket

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $28.00 (RRP)

    Add To Cart

  • Wheels MFG 6806/29 DUB 42x29x7mm pair
    Stock Code:
    WMBG-SB-6806/29

    Replacement Enduro 6806/29 ABEC-3 sealed bearings for Wheels Mfg DUB Compatible bottom brackets.

    - Dimensions: OD: 42mm / ID: 29mm / Width: 7mm
    - ABEC-3 - Grade 10, 5/32" chromium steel balls

    - Sold as Bag of 2

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $50.00 (RRP)

    Add To Cart

  • Wheels MFG BB30 Kit> DUB Bearings/Clips
    Stock Code:
    WMBB-BB30-KIT-DUB

    BB30 service kit for SRAM DUB cranks includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips.

    Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm
    Enduro ABEC-3 bearings
    Use with SRAM DUB cranks

    Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $78.00 (RRP)

    Add To Cart

  • Wheels MFG Bearing 1/4 Grade 25 150 Pce
    Stock Code:
    WMBG-BALL-11B

    Wheels MFG Bearing 1/4" Grade 25 150 Piece Bottle

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $27.00 (RRP)

    Add To Cart

  • Wheels MFG Bearing 1/4 Grade 300 250 Pce
    Stock Code:
    WMBG-BALL-05B

    Wheels MFG Bearing 1/4" Grade 300 250 piece Bottle

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $26.67 (RRP)

    Add To Cart

  • Wheels MFG Bearing 1/8 Grade 25 250 Pce
    Stock Code:
    WMBG-BALL-07B

    Wheels MFG Bearing 1/8" Grade 25 250 Pce

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $28.00 (RRP)

    Add To Cart