Chain rings

Chain rings
Brand
  • WOLF TOOTH ELLIPTICAL 64 BCD CHAINRINGS
    Stock Code:
    WTCHOVAL6428
    Stock Code:
    WTCHOVAL6430

    - These rings fit any crankset that has a 64 BCD "small ring" position. This includes standard 104 BCD cranksets, the M960 Shimano XTR crankset, the 96 BCD Triple cranksets (e.g. M782) and some others.
    - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
    Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
    If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
    - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
    - Chainline (approximate as BB centering and cranksets vary) - 47mm on a triple and 48mm on a double crankset
    - Ovality of 10% and timing of 112° after TDC (top dead center)
    - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)

    Stock Level:
    Out of Stock
    Stock Level:
    In Stock
    $122.26 (RRP)
    $122.26 (RRP)

    Add To Cart

  • WOLF TOOTH  ELLIPTICAL 96 BCD XT M8000 CHAINRINGS
    • WOLF TOOTH  ELLIPTICAL 96 BCD XT M8000 CHAINRINGS
    • WOLF TOOTH  ELLIPTICAL 96 BCD XT M8000 CHAINRINGS
    Stock Code:
    WTCHOVAL-M8K-30
    Stock Code:
    WTCHOVAL-M8K-34

    - These rings fit on the Shimano XT M8000 and SLX M7000 1x or 2x cranksets.
    - Use only the stock Shimano XT M8000 or SLX M7000 chainring bolts
    - These CAN be mounted to the XTR 9000 series cranks, but you will have to use the bolt caps that come with that crankset and you will need to file roughly 1mm off the threaded boss on each bolt cap (they are a little too long and don't allow the ring to be tightened down).
    - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
    - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
    Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
    If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).

    - Provide a great chainline on most boost bikes.
    - Chainline - 49mm
    - Boost Crankset Chainline - 52 mm
    - Must use the stock chainring bolts. The Wolf Tooth chainring bolts are a different size.
    - Ovality of 10% and timing of 112° after TDC (top dead center)
    - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)

    More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth’s PowerTrac Elliptical™ (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors’ versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.

    It’s like having two chainrings in one! With PowerTrac Elliptical rings, the larger-diameter section of the ring engages with the chain at the optimal point on the downstroke, or “Power Zone,” – between 1-5 and 7-11 on a clock face – to take advantage of your body’s natural biomechanical POWER: For example, during this section, a PTE 34t ring is equivalent to a 36t round ring. Similarly in the “Recovery Zone” (11-1 and 5-7), the smaller section on the PTE ring engages, maximizing EFFICIENCY in the weakest part of the pedal stroke; here the PTE 34t ring is equivalent to a 32t round ring.

    Additionally, the above provides a smoother, more efficient pedal rotation, which means better TRACTION. Steadier torque on the rear wheel means less spinning out in the “Power Zone,” while pedaling is easier during the “Recovery Zone,” so you maintain momentum.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $122.26 (RRP)
    $122.26 (RRP)

    Add To Cart

  • WOLF TOOTH  ELLIPTICAL96 BCD XT M8000 CHAINRINGS
    Stock Code:
    WTCHOVAL-M8K-32

    - These rings fit on the Shimano XT M8000 and SLX M7000 1x or 2x cranksets.
    - Use only the stock Shimano XT M8000 or SLX M7000 chainring bolts
    - These CAN be mounted to the XTR 9000 series cranks, but you will have to use the bolt caps that come with that crankset and you will need to file roughly 1mm off the threaded boss on each bolt cap (they are a little too long and don't allow the ring to be tightened down).
    - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
    - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
    Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
    If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).

    - Provide a great chainline on most boost bikes.
    - Chainline - 49mm
    - Boost Crankset Chainline - 52 mm
    - Must use the stock chainring bolts. The Wolf Tooth chainring bolts are a different size.
    - Ovality of 10% and timing of 112° after TDC (top dead center)
    - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)

    More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth’s PowerTrac Elliptical™ (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors’ versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.

    It’s like having two chainrings in one! With PowerTrac Elliptical rings, the larger-diameter section of the ring engages with the chain at the optimal point on the downstroke, or “Power Zone,” – between 1-5 and 7-11 on a clock face – to take advantage of your body’s natural biomechanical POWER: For example, during this section, a PTE 34t ring is equivalent to a 36t round ring. Similarly in the “Recovery Zone” (11-1 and 5-7), the smaller section on the PTE ring engages, maximizing EFFICIENCY in the weakest part of the pedal stroke; here the PTE 34t ring is equivalent to a 32t round ring.

    Additionally, the above provides a smoother, more efficient pedal rotation, which means better TRACTION. Steadier torque on the rear wheel means less spinning out in the “Power Zone,” while pedaling is easier during the “Recovery Zone,” so you maintain momentum.

    Stock Level:
    In Stock
    $122.26 (RRP)

    Add To Cart

  • WOLF TOOTH 96 BCD XTR ELLIPTICAL CHAINRINGS
    • WOLF TOOTH 96 BCD XTR ELLIPTICAL CHAINRINGS
    • WOLF TOOTH 96 BCD XTR ELLIPTICAL CHAINRINGS
    • WOLF TOOTH 96 BCD XTR ELLIPTICAL CHAINRINGS
    Stock Code:
    WTCHOVAL-30XTRM9000
    Stock Code:
    WTCHOVAL-32XTRM9000
    Stock Code:
    WTCHOVAL-34XTRM9000

    These chainrings fit only the Shimano XTR M9000 and M9020 cranksets (race and trail respectively). They have an asymmetrical 96 mm BCD with built-in threaded standoffs to provide the ideal 1X chainline.

    - Use only the stock Shimano XTR chainring bolts (M7)
    - You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset.
    - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.
    - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)

    Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
    If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).

    - Provide a great chainline on most boost bikes.
    - Chainline - 49mm for 30-34t

    More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth’s PowerTrac Elliptical™ (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors’ versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.

    It’s like having two chainrings in one! With PowerTrac Elliptical rings, the larger-diameter section of the ring engages with the chain at the optimal point on the downstroke, or “Power Zone,” – between 1-5 and 7-11 on a clock face – to take advantage of your body’s natural biomechanical POWER: For example, during this section, a PTE 34t ring is equivalent to a 36t round ring. Similarly in the “Recovery Zone” (11-1 and 5-7), the smaller section on the PTE ring engages, maximizing EFFICIENCY in the weakest part of the pedal stroke; here the PTE 34t ring is equivalent to a 32t round ring.

    Additionally, the above provides a smoother, more efficient pedal rotation, which means better TRACTION. Steadier torque on the rear wheel means less spinning out in the “Power Zone,” while pedaling is easier during the “Recovery Zone,” so you maintain momentum.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    2
    $122.26 (RRP)
    $122.26 (RRP)
    $131.67 (RRP)

    Add To Cart

  • WOLF TOOTH RACE FACE CINCH DIRECT MOUNT CHAINRINGS
    • WOLF TOOTH RACE FACE CINCH DIRECT MOUNT CHAINRINGS
    • WOLF TOOTH RACE FACE CINCH DIRECT MOUNT CHAINRINGS
    • WOLF TOOTH RACE FACE CINCH DIRECT MOUNT CHAINRINGS
    Stock Code:
    WTCHRFC26
    Stock Code:
    WTCHRFC28
    Stock Code:
    WTCHRFC28-BST
    Stock Code:
    WTCHRFC30
    Stock Code:
    WTCHRFC30-BST
    Stock Code:
    WTCHRFC32
    Stock Code:
    WTCHRFC32-BST
    Stock Code:
    WTCHRFC34
    Stock Code:
    WTCHRFC34-BST
    Stock Code:
    WTCHRFC36
    Stock Code:
    WTCHRFC36-BST

    Direct Mount Chainrings for Race Face Cinch STANDARD / 6mm Offset

    These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature our patented Drop-Stop® design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings.

    Compatibility

    - Any Race Face Cinch™ system crankset.
    - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
    - Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available.
    - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
    Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
    If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    In Stock
    Stock Level:
    1
    Stock Level:
    In Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    $131.67 (RRP)
    $131.67 (RRP)
    $131.67 (RRP)
    $131.67 (RRP)
    $131.67 (RRP)
    $131.67 (RRP)
    $131.67 (RRP)
    $141.08 (RRP)
    $141.08 (RRP)
    $150.49 (RRP)
    $150.49 (RRP)

    Add To Cart

  • WOLF TOOTH RACE FACE CINCH DIRECT MOUNT SHIMANO 12SPD CHAINRINGS
    Stock Code:
    WTCHRFC30-BST-SH12

    Direct Mount Chainrings for Race Face Cinch for Shimano 12spd Hyperglide+ Chain BOOST / 3mm Offset

    The new Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology.

    - The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.
    - Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.
    - Prevents premature ring and chain wear that can come from non-optimized profiles.

    Compatibility

    - Any Race Face Cinch™ system crankset.
    - Compatible with Shimano 12-speed Hyperglide+ chains
    - Shimano 12 speed HG+ drivetrains use a 52mm Boost chainline for both 148mm Boost and 142mm standard rear hub spacing

    Stock Level:
    In Stock
    $150.49 (RRP)

    Add To Cart

  • WOLF TOOTH RACE FACE CINCH DIRECT MOUNT 12SPD SHIMANO CHAINRINGS
    • WOLF TOOTH RACE FACE CINCH DIRECT MOUNT 12SPD SHIMANO CHAINRINGS
    • WOLF TOOTH RACE FACE CINCH DIRECT MOUNT 12SPD SHIMANO CHAINRINGS
    Stock Code:
    WTCHRFC32-BST-SH12
    Stock Code:
    WTCHRFC34-BST-SH12

    Direct Mount Chainrings for Race Face Cinch for Shimano 12spd Hyperglide+ Chain BOOST / 3mm Offset

    The new Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology.

    - The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.
    - Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.
    - Prevents premature ring and chain wear that can come from non-optimized profiles.

    Compatibility

    - Any Race Face Cinch™ system crankset.
    - Compatible with Shimano 12-speed Hyperglide+ chains
    - Shimano 12 speed HG+ drivetrains use a 52mm Boost chainline for both 148mm Boost and 142mm standard rear hub spacing

    Stock Level:
    1
    Stock Level:
    1
    $150.49 (RRP)
    $150.49 (RRP)

    Add To Cart

  • WOLF TOOTH DIRECT MOUNT SHIMANO 12SPD CHAINRINGS
    • WOLF TOOTH DIRECT MOUNT SHIMANO 12SPD CHAINRINGS
    • WOLF TOOTH DIRECT MOUNT SHIMANO 12SPD CHAINRINGS
    • WOLF TOOTH DIRECT MOUNT SHIMANO 12SPD CHAINRINGS
    Stock Code:
    WTCHSHDM30-BST-SH12
    Stock Code:
    WTCHSHDM32-BST-SH12
    Stock Code:
    WTCHSHDM34-BST-SH12

    Direct Mount Chainrings for Shimano Cranks for Shimano 12spd Hyperglide+ Chain BOOST / 3mm Offset

    The Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology.

    - The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.
    - Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.
    - Prevents premature ring and chain wear that can come from non-optimized profiles.


    Compatibility

    - Shimano XTR M9100, XT M8100, and SLX M7100 series 12 speed cranksets.
    - Compatible with Shimano 12-speed Hyperglide+ chains
    - Boost crankset, models M9100, M8100, M7100, MT610 - will use a Boost ring with Boost rear hub spacing (148mm)

    Stock Level:
    Out of Stock
    Stock Level:
    2
    Stock Level:
    2
    $150.49 (RRP)
    $150.49 (RRP)
    $150.49 (RRP)

    Add To Cart

  • WOLF TOOTH DIRECT MOUNT SHIMANO 12SPD SUPER BOOST CHAINRINGS
    • WOLF TOOTH DIRECT MOUNT SHIMANO 12SPD SUPER BOOST CHAINRINGS
    • WOLF TOOTH DIRECT MOUNT SHIMANO 12SPD SUPER BOOST CHAINRINGS
    Stock Code:
    WTCHSHDM32-SBP-SH12
    Stock Code:
    WTCHSHDM34-SBP-SH12

    Direct Mount Chainrings for Shimano Cranks for Shimano 12spd Hyperglide+ Chain SUPER BOOST

    The Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology.

    - The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.
    - Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.
    - Prevents premature ring and chain wear that can come from non-optimized profiles.


    Compatibility

    - Shimano XTR M9100, XT M8100, and SLX M7100 series 12 speed cranksets.
    - Compatible with Shimano 12-speed Hyperglide+ chains
    - Super boost cranksets -models M8120, M8130, M7120 and M7130 - use the Boost chainring. These Super Boost cranksets have a longer spindle and do not use the Super Boost chainring. These cranks and ring should ONLY be used on bikes with Super Boost rear hub spacing (157mm)
    - Boost crankset, models M9100, M8100, M7100, MT610 - will use a Boost ring with Boost rear hub spacing (148mm) and a Super Boost ring with Super Boost rear hub spacing (157mm).

    Stock Level:
    Out of Stock
    Stock Level:
    In Stock
    $150.49 (RRP)
    $150.49 (RRP)

    Add To Cart

  • WOLF TOOTH SRAM DIRECT MOUNT CHAINRINGS
    • WOLF TOOTH SRAM DIRECT MOUNT CHAINRINGS
    • WOLF TOOTH SRAM DIRECT MOUNT CHAINRINGS
    • WOLF TOOTH SRAM DIRECT MOUNT CHAINRINGS
    Stock Code:
    WTCHBB3026
    Stock Code:
    WTCHASM5-SDM26
    Stock Code:
    WTCHASM5-SDM28
    Stock Code:
    WTCHBB3028
    Stock Code:
    WTCHASM5-SDM30
    Stock Code:
    WTCHBB3030
    Stock Code:
    WTCHASM5-SDM32
    Stock Code:
    WTCHBB3032
    Stock Code:
    WTCHASM5-SDM34
    Stock Code:
    WTCHBB3034
    Stock Code:
    WTCHASM5-SDM36
    Stock Code:
    WTCHBB3036

    SDM® Standard 6mm offset chainrings replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet.

    - 9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9 speed, 10 speed, and 11 speed chains. They also work with 12 speed Eagle and 12 speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12 speed Flattop chain.

    - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks
    - Standard: 49mm chainline, 6mm offset for non-Boost mountain bikes, GXP and long spindle BB30

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    In Stock
    Stock Level:
    2
    Stock Level:
    Out of Stock
    $131.67 (RRP)
    $131.67 (RRP)
    $131.67 (RRP)
    $131.67 (RRP)
    $131.67 (RRP)
    $131.67 (RRP)
    $131.67 (RRP)
    $131.67 (RRP)
    $141.08 (RRP)
    $141.08 (RRP)
    $150.49 (RRP)
    $150.49 (RRP)

    Add To Cart

  • WOLF TOOTH SRAM DIRECT MOUNT FLAT TOP CHAINRINGS
    • WOLF TOOTH SRAM DIRECT MOUNT FLAT TOP CHAINRINGS
    • WOLF TOOTH SRAM DIRECT MOUNT FLAT TOP CHAINRINGS
    • WOLF TOOTH SRAM DIRECT MOUNT FLAT TOP CHAINRINGS
    Stock Code:
    WTCHSDM38-FT
    Stock Code:
    WTCHSDM40-FT
    Stock Code:
    WTCHSDM42-FT

    Direct Mount Chainrings for SRAM Cranks STANDARD / 6mm Offset FLATTOP

    Compatibility

    - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8 bolt mounting interface that is not compatible with these chainrings.
    - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
    - 10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10 speed, and 11 speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain.

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    $150.49 (RRP)
    $159.91 (RRP)
    $159.91 (RRP)

    Add To Cart

  • WOLF TOOTH SRAM BOOST DIRECT MOUNT CHAINRINGS
    • WOLF TOOTH SRAM BOOST DIRECT MOUNT CHAINRINGS
    • WOLF TOOTH SRAM BOOST DIRECT MOUNT CHAINRINGS
    • WOLF TOOTH SRAM BOOST DIRECT MOUNT CHAINRINGS
    • WOLF TOOTH SRAM BOOST DIRECT MOUNT CHAINRINGS
    • WOLF TOOTH SRAM BOOST DIRECT MOUNT CHAINRINGS
    Stock Code:
    WTCHSDM28-BST
    Stock Code:
    WTCHSDM30-BST
    Stock Code:
    WTCHSDM32-BST
    Stock Code:
    WTCHSDM34-BST
    Stock Code:
    WTCHSDM36-BST

    Direct Mount Chainrings for SRAM Cranks BOOST / 3mm Offset

    Compatibility

    - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8 bolt mounting interface that is not compatible with these chainrings.
    - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
    - 9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9 speed, 10 speed, and 11 speed chains. They also work with 12 speed Eagle and 12 speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12 speed Flattop chain.

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    2
    Stock Level:
    In Stock
    $131.67 (RRP)
    $131.67 (RRP)
    $131.67 (RRP)
    $141.08 (RRP)
    $141.08 (RRP)

    Add To Cart

  • Wolf Tooth SRAM D/M Boost32t SH12 Nickel
    Stock Code:
    WTCHSDM32-BST-NI-SH12

    Direct Mount Chainrings for Cane Creek and SRAM Cranks for Shimano 12spd Hyperglide+ Chain BOOST / 3mm

    These nickel-plated chainrings were designed to look great on the Cane Creek eeWing titanium cranksets. They also work great on SRAM direct mount cranksets.
    The Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology.

    - The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.
    - Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.
    - Prevents premature ring and chain wear that can come from non-optimized profiles.

    Compatibility

    - Cane Creek eeWing cranksets
    - SRAM 3 bolt direct mount cranksets
    - Compatible with Shimano 12-speed Hyperglide+ chains on bikes with boost and non-boost spacing

    Stock Level:
    1
    $150.49 (RRP)

    Add To Cart

  • Wolf Tooth SRAM D/M Boost34t SH12 Nickel
    Stock Code:
    WTCHSDM34-BST-NI-SH12

    Direct Mount Chainrings for Cane Creek and SRAM Cranks for Shimano 12spd Hyperglide+ Chain BOOST / 3mm

    These nickel-plated chainrings were designed to look great on the Cane Creek eeWing titanium cranksets. They also work great on SRAM direct mount cranksets.
    The Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology.

    - The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.
    - Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.
    - Prevents premature ring and chain wear that can come from non-optimized profiles.

    Compatibility

    - Cane Creek eeWing cranksets
    - SRAM 3 bolt direct mount cranksets
    - Compatible with Shimano 12-speed Hyperglide+ chains on bikes with boost and non-boost spacing

    Stock Level:
    Out of Stock
    $150.49 (RRP)
  • Wolf Tooth SRAM D/M Chainring Bolts
    Stock Code:
    WTChBOLT-M5X8
    Stock Level:
    Out of Stock
    $9.32 (RRP)
  • WOLF TOOTH DIRECT MOUNT SRAM STAINLESS STEEL CHAINRING
    • WOLF TOOTH DIRECT MOUNT SRAM STAINLESS STEEL CHAINRING
    • WOLF TOOTH DIRECT MOUNT SRAM STAINLESS STEEL CHAINRING
    • WOLF TOOTH DIRECT MOUNT SRAM STAINLESS STEEL CHAINRING
    • WOLF TOOTH DIRECT MOUNT SRAM STAINLESS STEEL CHAINRING
    Stock Code:
    WTCHSST-SDM24
    Stock Code:
    WTCHSST-SDM26
    Stock Code:
    WTCHSST-SDM28
    Stock Code:
    WTCHSST-SDM30
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    $188.14 (RRP)
    $188.14 (RRP)
    $188.14 (RRP)
    $188.14 (RRP)

    Add To Cart