Wheels Manufacturing

Wheels Manufacturing
  • Wheels MFG 10mm Sealed Bearing Extractor
    Stock Code:
    WMTL-6000-EXT

    6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor

    Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings

    6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
    6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
    6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
    6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm

    Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing

    Tap the extractor out with a punch

    Stock Level:
    2
    $30.24 (RRP)

    Add To Cart

  • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    Stock Code:
    WMTL-1526OB
    Stock Code:
    WMTL-1728OB
    Stock Code:
    WMTL-2437OB
    Stock Code:
    WMTL-27537OB
    Stock Code:
    WMTL-6000OB
    Stock Code:
    WMTL-6001OB
    Stock Code:
    WMTL-6002OB
    Stock Code:
    WMTL-6003OB
    Stock Code:
    WMTL-6801OB-1
    Stock Code:
    WMTL-6802OB-1
    Stock Code:
    WMTL-6803OB-1
    Stock Code:
    WMTL-6804OB
    Stock Code:
    WMTL-6805OB
    Stock Code:
    WMTL-6806OB
    Stock Code:
    WMTL-6900OB-1
    Stock Code:
    WMTL-6901OB-1
    Stock Code:
    WMTL-6902OB
    Stock Code:
    WMTL-6903OB
    Stock Code:
    WMTL-6904OB
    Stock Code:
    WMTL-GXP-LEFT

    Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.

    Installs: 15267, 15268 bearings
    Inner Step Outer Diameter: 14.8mm
    Outer Diameter: 25.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 1728 open bore adapter is used to press 28x17 sealed bearings. The adapter is machined with one step at 27mm OD, which fits in to the center of the sealed bearing.

    Installs: 17287 bearing
    Inner Step Outer Diameter: 16.8mm
    Outer Diameter: 27.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 2437 open bore adapter is used to press 24x37 sealed bearings in to Shimano compatible bottom bracket cups, and direct fit frames like Trek BB90. The adapter is machined with one step at 24mm OD, which fits in to the center of the sealed bearing.


    Use with 24x37x7 bearing

    Outer Diameter: 37mm

    Inner Step Diameter: 24mm

    Inner hole sized to fit 3/8" threaded rod

    Compatible with PRESS-1 or PRESS-4 handles

    Machined, anodized gray aluminum

    Sold individually

    SRAM Predictive Steering Bearing Open Bore adapter, also referred to as a drift, is used to press sealed bearings in to SRAM Predictive Steering front hubs. The adapter is machined with a 37mm OD, and a machined step at 27.5mm that slips in to the center of the sealed bearing. Compatible with our PRESS-1 or PRESS-4 sealed bearing press to press in the bearing.

    Installs: 27.5X37 bearing
    Inner Step Outer Diameter: 27.3mm
    Outer Diameter: 36.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6000 open bore adapter, also referred to as a drift, is used to press 6000 sealed bearings.

    Installs: 6000 bearing
    Outer Diameter: 21.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Thickness: 8mm
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6001 open bore adapter is used to press 28x12 sealed bearings. The adapter is machined with one step at 12mm OD, which fits in to the center of the sealed bearing.

    Installs: 6001 bearing
    Inner Step Outer Diameter: 11.9mm
    Outer Diameter: 27.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6002 open bore adapter is used to press 32x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.

    Installs: 6002 bearing
    Inner Step Outer Diameter: 14.8mm
    Outer Diameter: 31.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6003 open bore adapter is used to press 35x17 sealed bearings. The adapter is machined with one step at 17mm OD, which fits in to the center of the sealed bearing.

    Installs: 6003 bearing
    Inner Step Outer Diameter: 16.8mm
    Outer Diameter: 34.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6801 open bore adapter is used to press 21x12 sealed bearings. The adapter is machined with one step at 12mm OD, which fits in to the center of the sealed bearing.

    Installs: 6801 bearing
    Inner Step Outer Diameter: 11.9mm
    Outer Diameter: 20.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6802 open bore adapter is used to press 24x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.

    Installs: 6802 bearing
    Inner Step Outer Diameter: 14.8mm
    Outer Diameter: 23.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6803 open bore adapter is used to press 26x17 sealed bearings. The adapter is machined with one step at 17mm OD, which fits in to the center of the sealed bearing.

    Installs: 6803 bearing
    Inner Step Outer Diameter: 16.9mm
    Outer Diameter: 25.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6804 open bore adapter is used to press 32x20 sealed bearings. The adapter is machined with one step at 20mm OD, which fits in to the center of the sealed bearing.

    Installs: 6804 bearing
    Inner Step Outer Diameter: 19.8mm
    Outer Diameter: 31.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6805 open bore adapter is used to press 37x25 sealed bearings. The adapter is machined with one step at 25mm OD, which fits in to the center of the sealed bearing.

    Installs: 6805 bearing
    Inner Step Outer Diameter: 24.8mm
    Outer Diameter: 36.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm OD, which fits in to the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets.

    Installs: 6806 bearing
    Inner Step Outer Diameter: 29.9mm
    Outer Diameter: 41.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6900 open bore adapter is used to press 22x10 sealed bearings.

    Installs: 6901 bearing
    Outer Diameter: 21.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6901 open bore adapter is used to press 24x12 sealed bearings. The adapter is machined with one step at 12mm OD, which fits in to the center of the sealed bearing.

    Installs: 6901 bearing
    Inner Step Outer Diameter: 11.9mm
    Outer Diameter: 23.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6902 open bore adapter is used to press 28x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.

    Installs: 6902 bearing
    Inner Step Outer Diameter: 14.9mm
    Outer Diameter: 27.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6903 open bore adapter is used to press 30x17 sealed bearings. The adapter is machined with one step at 17mm OD, which fits in to the center of the sealed bearing.

    Installs: 6903 bearing
    Inner Step Outer Diameter: 16.9mm
    Outer Diameter: 29.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our 6904 open bore adapter is used to press 37x20 sealed bearings. The adapter is machined with one step at 20mm OD, which fits in to the center of the sealed bearing.

    Installs: 6904 bearing
    Inner Step Outer Diameter: 19.9mm
    Outer Diameter: 36.8mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum
    Sold individually (2 drifts required for some installations)

    Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings in to SRAM GXP bottom bracket cups and direct fit frames like TREK BB90. The adapter is machined with one step at 22mm OD, which fits in to the center of the sealed bearing.

    Installs: 22X37 (GXP) bearing
    Inner Step Outer Diameter: 22mm
    Outer Diameter: 37mm
    Thru Hole Diameter: 0.387" (9.8mm)
    Inner hole sized to fit 3/8" ACME threaded rod
    Compatible with PRESS-1 or PRESS-4 handles
    Machined, red anodized aluminum

    * Sold individually

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    Out of Stock
    Stock Level:
    In Stock
    Stock Level:
    2
    Stock Level:
    Out of Stock
    Stock Level:
    2
    Stock Level:
    1
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    Out of Stock
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    2
    Expected Date:
    23 April 2019
    Expected Date:
    23 April 2019
    Expected Date:
    23 April 2019
    Expected Date:
    23 April 2019
    Expected Date:
    23 April 2019
    $16.00 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $16.00 (RRP)
    $12.63 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.26 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.26 (RRP)

    Add To Cart

  • Wheels MFG 29MM Sram DUB Open Bore Adapt
    Stock Code:
    WMTL-29SRAM-OB

    29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg Bottom Bracket Press (PRESS-7, PRESS-7-PRO or PRESS-9-PRO)

    Installs: 29X42 (DUB) bearing
    Inner Step Outer Diameter: 41.8mm
    Outer Diameter: 28.9mm
    Thru Hole Diameter: 12.8mm (1/2")
    Thickness: 7mm
    Compatible with PRESS-7, PRESS-7-PRO or PRESS-9-PRO handles/rod.
    Machined, red anodized aluminum
    Sold individually

    Stock Level:
    Out of Stock
    Expected Date:
    23 April 2019
    POA
  • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    • WHEELS MFG OVER AXLE ADAPTER
    Stock Code:
    WMTL-6000OA-6
    Stock Code:
    WMTL-6001OA-7
    Stock Code:
    WMTL-6002OA-7
    Stock Code:
    WMTL-6003OA-7
    Stock Code:
    WMTL-6802OA-20
    Stock Code:
    WMTL-6803OA-20
    Stock Code:
    WMTL-6804OA-20
    Stock Code:
    WMTL-6900OA-40
    Stock Code:
    WMTL-6901OA-40
    Stock Code:
    WMTL-6902OA-7
    Stock Code:
    WMTL-6903OA-7
    Stock Code:
    WMTL-6904OA-7

    These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4

    These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4

    These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4

    These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4

    These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4

    These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4

    These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4

    These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4

    These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4

    These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4

    These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4

    These drifts are spares for your most commonly used bearing sizes. They're also an excelent addition to the Press-4

    Stock Level:
    In Stock
    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    1
    Stock Level:
    2
    Stock Level:
    In Stock
    Stock Level:
    2
    $12.63 (RRP)
    $12.63 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)

    Add To Cart

  • WHEELS MFG DRIFT INDIVIDUAL
    • WHEELS MFG DRIFT INDIVIDUAL
    • WHEELS MFG DRIFT INDIVIDUAL
    • WHEELS MFG DRIFT INDIVIDUAL
    • WHEELS MFG DRIFT INDIVIDUAL
    • WHEELS MFG DRIFT INDIVIDUAL
    Stock Code:
    WMTL-DRIFTS-6001OB
    Stock Code:
    WMTL-DRIFTS-6801OB
    Stock Code:
    WMTL-DRIFTS-6806OB
    Stock Code:
    WMTL-DRIFTS-6900OB
    Stock Code:
    WMTL-DRIFTS-6903OB

    Another must-have tool for the busy bike shop, open bore adapters allow for easy installation of sealed bearings into hub bodies, suspension linkages, bottom bracket cups and BB30 frames. No more destroyed bearings during the installation process!

    Open Bore adapters, also referred to as drifts, are used to press sealed bearings in to hub bodies, suspension linkages, bottom brackets and frames. The adapter slips in to the center of the sealed bearing, and when used with our PRESS-1 or PRESS-4 tools, presses the bearing.

    * Sold individually (2 drifts required for some installations)

    Open Bore adapters, also referred to as drifts, are used to press sealed bearings in to hub bodies, suspension linkages, bottom brackets and frames. The adapter slips in to the center of the sealed bearing, and when used with our PRESS-1 or PRESS-4 tools, presses the bearing.

    *Sold individually (2 drifts required for some installations)

    Another must-have tool for the busy bike shop, open bore adapters allow for easy installation of sealed bearings into hub bodies, suspension linkages, bottom bracket cups and BB30 frames. No more destroyed bearings during the installation process!

    Open Bore adapters, also referred to as drifts, are used to press sealed bearings in to hub bodies, suspension linkages, bottom brackets and frames. The adapter slips in to the center of the sealed bearing, and when used with our PRESS-1 or PRESS-4 tools, presses the bearing.

    * Sold individually (2 drifts required for some installations)

    6900 open bore adapter is used to press 22x10 sealed bearings.

    - Installs: 6901 bearing
    - Outer Diameter: 21.8mm
    - Thru Hole Diameter: 0.387" (9.8mm)
    - Inner hole sized to fit 3/8" ACME threaded rod
    - Compatible with PRESS-1 or PRESS-4 handles
    - Machined, red anodized aluminum
    - Sold individually (2 drifts required for some installations)

    Open Bore adapters, also referred to as drifts, are used to press sealed bearings in to hub bodies, suspension linkages, bottom brackets and frames. The adapter slips in to the center of the sealed bearing, and when used with our PRESS-1 or PRESS-4 tools, presses the bearing.

    *Sold individually (2 drifts required for some installations)

    Stock Level:
    Out of Stock
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    2
    Stock Level:
    In Stock
    $13.37 (RRP)
    $13.37 (RRP)
    $13.37 (RRP)
    $13.26 (RRP)
    $13.37 (RRP)

    Add To Cart

  • Wheels MFG 6003 Bearing Extractor
    Stock Code:
    WMTL-6003-EXT

    Individual extractor for removing 6003 Bearing ID: 17mm / OD: 35mm / Width: 10mm

    Stock Level:
    Out of Stock
    Expected Date:
    23 April 2019
    POA
  • Wheels MFG Axle/Cone thread gauge ruler
    Stock Code:
    WMTL-RULER

    Wheels MFG Axle/Cone thread gauge ruler

    Measures threads for all cones, locknuts, and axles

    Inch and metric scales for measuring axle and spoke lengths


    Durable black anodized aluminum with laser etched Wheels Mfg. part numbers for quick reference


    Easily mounts on bench top

    Stock Level:
    1
    $104.54 (RRP)

    Add To Cart

  • Wheels MFG BB Sealed Bearing Extract Kit
    Stock Code:
    WMTL-BB-EXT

    Bottom Bracket Sealed Bearing Extractor Set

    Bearing extractors set for pushing out 22mm, 24mm and 30mm ID sealed bearings from bottom bracket cups. Compatible with our 1/2" threaded press rod and handles (PRESS-7 and PRESS-7-PRO).

    BB-EXT Includes

    (1) 30mm ID sealed bearing extractor
    (1) 24mm ID sealed bearing extractor
    (1) 22mm ID sealed bearing extractor
    (1) 52mm receiver cup
    (1) 44mm receiver cup sleeve
    (1) 42mm receiver cup sleeve
    (1) 39mm receiver cup sleeve
    (1) bearing pusher shaft

    Stock Level:
    In Stock
    $213.83 (RRP)

    Add To Cart

  • Wheels MFG Bearing Gauge ruler
    Stock Code:
    WMTL-RULER-BEAR

    Measures OD and ID of sealed bearings, as well as outer diameter of loose ball bearings

    Durable black anodized aluminum with laser etched lettering to quickly identify bearing size

    Easily mounts on bench top

    Stock Level:
    1
    $95.05 (RRP)

    Add To Cart

  • WHEELS MFG BEARING PRESS SPEED SPACERS
    • WHEELS MFG BEARING PRESS SPEED SPACERS
    • WHEELS MFG BEARING PRESS SPEED SPACERS
    Stock Code:
    WMTL-SS-30
    Stock Code:
    WMTL-SS-15-25

    Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up.

    Compatible with:
    - PRESS-4 - Economy Press
    - PRESS-1 - Large Sealed Bearing Press
    - PRESS-1 Handle & Rod Assembly
    - Length: 30mm
    - OD: 22mm
    - ID: 10mm
    - Machined Aluminum
    - Anodized Red
    - Sold individually

    Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up. 15mm thru hole size makes this perfect for use on hubs with larger axles.

    Compatible with:

    PRESS-4 - Economy Press
    PRESS-1 - Large Sealed Bearing Press
    PRESS-1 Handle & Rod Assembly

    Length: 25mm
    OD: 23.8mm
    ID: 15.1mm
    Machined Aluminum

    *Sold individually

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $13.26 (RRP)
    $13.26 (RRP)

    Add To Cart

  • Wheels MFG Bottom Bracket Socket
    Stock Code:
    WMTL-BBTOOL-48-44

    Double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Compatible with all Wheels Manufacturing bottom brackets. Socket is machined for 1/2" drive, but a 3/8" to 1/2" adapter is included so you can use it with 3/8" drive torque wrenches.

    48.5mm, 16-notch pattern matches up with Wheels Mfg bottom brackets, along with some FSA MegaEVO bottom brackets. The 44mm, 16-notch side matches up with Wheels Manufacturing bottom brackets, along with many other outboard bearing bottom brackets including Shimano, FSA MegaEXO and SRAM/Truvativ.

    Stock Level:
    In Stock
    $73.50 (RRP)

    Add To Cart

  • Wheels MFG Bottom Bracket Wall Chart
    Stock Code:
    WMTL-BR-5

    Wheels Mfg Bottom Bracket wall chart shows most popular bottom bracket standards and cranksets in an easy to read reference chart detailing the easiest way to determine what bottom bracket, cranks and adapters your shop will need to service most bicycles.

    22" wide x 28" high
    This wall chart is a must for any shop that services and sells our bottom brackets and adapters.

    Stock Level:
    In Stock
    $9.26 (RRP)

    Add To Cart

  • Wheels MFG Bush Tool all sizes of shock
    Stock Code:
    WMTL-TOOL-BUSH

    Easy-to-use tool removes and installs replacement bushings

    Includes retaining tool, top cap and all three eyelet "slammers", color coded and laser etched

    Fits all eyelet sizes - 10mm, 12mm and 1/2"


    Double click on above image to view full picture

    .

    Stock Level:
    In Stock
    $94.71 (RRP)

    Add To Cart

  • Wheels MFG Double End BB Wrench 48.5/44
    Stock Code:
    WMTL-WRENCH-BB48-44

    Wheels Manufacturing very own double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. Machined aluminum, anodized red.

    Compatible with all current Wheels Mfg bottom brackets with notched cups.

    Stock Level:
    In Stock
    $61.95 (RRP)

    Add To Cart

  • Wheels MFG Driftset BB (Use w/Press-4)
    Stock Code:
    WMTL-DRIFTSET-BB

    This 7-piece adapter set is used to install 22mm and larger inside diameter sealed bearings

    Compatible with Wheels Mfg. PRESS-1 and PRESS-4 handles

    This set includes the following drifts and spacers:

    •6806 OB
    •2437 X 6805 OB
    •GXP-LEFT OB
    •52X30 OB

    Stock Level:
    In Stock
    $128.31 (RRP)

    Add To Cart

  • Wheels MFG Driftset Hub-1
    Stock Code:
    WMTL-DRIFTSET-HUB1

    10mm ID & Larger Hub Bearing Installaton Drift SetPart Number: DRIFTSET-HUB1

    This 23-piece drift set is used to install 10mm and larger inside diameter sealed bearings

    Compatible with the Wheels Mfg. PRESS-1 and PRESS-4 handles

    This set includes the following drifts and spacers:

    •6802 Open Bore (x2)
    •6802 Over Axle
    •6901 Over Axle, 20mm
    •6901 Open Bore (x2)
    •6901 Over Axle, 40mm
    •6902 Open Bore (x2)
    •6902 Over Axle, 7mm
    •6903 Open Bore (x2)
    •6903 Over Axle
    •6000 Open Bore (x2)
    •6000 Over Axle, 6mm
    •6001 Open Bore (x2)
    •6000 Over Axle
    •15-25mm Speed Spacer
    •17-25mm Speed Spacer
    •20-25mm Speed Spacer
    •30mm Speed Spacer (x2)

    Stock Level:
    1
    $128.31 (RRP)

    Add To Cart

  • Wheels MFG Drop-out savers <7mm narrow 2
    Stock Code:
    WMTL-DS-2

    Wheels MFG Drop-out savers <7mm narrow 2 per
    Dropout savers are designed to replace damaged threads in rear derailleur mounts.
    Made from aircraft quality steel, dropout savers provide an economical and reliable alternative to the "major surgery" of replacing a complete dropout
    • Wide Dropout Saver fits dropouts 7mm or more in thickness
    • Narrow Dropout Saver fits dropouts 7mm or less in thickness
    • 2 pieces

    Stock Level:
    In Stock
    $39.29 (RRP)

    Add To Cart

  • Wheels MFG Drop-out savers >7mm wide 2 p
    Stock Code:
    WMTL-DS-1

    Wheels MFG Drop-out savers >7mm wide 2 per
    Dropout savers are designed to replace damaged threads in rear derailleur mounts.
    Made from aircraft quality steel, dropout savers provide an economical and reliable alternative to the "major surgery" of replacing a complete dropout
    • Wide Dropout Saver fits dropouts 7mm or more in thickness
    • Narrow Dropout Saver fits dropouts 7mm or less in thickness
    • 2 pieces

    Stock Level:
    In Stock
    $39.29 (RRP)

    Add To Cart

  • Wheels MFG Dropout Saver Kit 6 piece
    Stock Code:
    WMTL-DS-KIT

    Wheels MFG Dropout Saver Kit 6 piece
    The Dropout Saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads and install a Dropout Saver and realign the dropout.
    Kit includes (1) 15/32" drill bit, (2) DS-1 wide, and (3) DS-2 narrow dropout savers

    Stock Level:
    In Stock
    $107.73 (RRP)

    Add To Cart

  • Wheels MFG Hanger Shop tech chart
    Stock Code:
    WMTL-BR-3

    Wheels Manufacturing Derailleur Hanger Chart

    •Actual-size photos of over 176 derailleur hanger models
    •24” wide x 36” high

    •Includes axle and cone sizes & dimensions
    Our derailleur hanger chart is used and valued by repair shops worldwide.

    Stock Level:
    In Stock
    $6.20 (RRP)

    Add To Cart

  • Wheels MFG Jar o ties 600x4 Black
    Stock Code:
    WMTL-JAR-TIE

    Wheels MFG Jar o' ties 600x200mm Black Cable ties

    Stock Level:
    In Stock
    $48.86 (RRP)

    Add To Cart

  • Wheels MFG Lockring Wrench
    Stock Code:
    WMTL-TOOL-SPAN

    Hozan Locring Wrench for use with our Eccentric Bottom Brackets and Track Lockring (LOCKRINGTR).

    Double-ended tool fits most bottom bracket lockrings and also works great for track lockrings
    Length: 265mm
    Weight: 128g

    Stock Level:
    In Stock
    $73.50 (RRP)

    Add To Cart

  • Wheels MFG Press 1 Large Bearing
    Stock Code:
    WMTL-PRESS1

    Wheels MFG Press 1 Large Bearing: For bearings
    SB6000-6001-6002-6003-6801-6802-6803-6804-6805-6806-6900-6901-6902-6903-6904-2437

    Gone are the days when shop mechanics grabbed whatever socket was close enough to the sealed bearing size and just tapped it in. The Press-1 Sealed Bearing Press replaces that archaic installation system, providing the right tool for the job.

    PRESS-1 installs 20 bearing sizes including today's most common bottom bracket bearings. Also includes linkage offsets for full suspension bearing installation and three speed spacers for faster installs. All parts are laser etched for easy identification.

    PRESS-1 includes:

    T-Handles with 3/8" Acme threaded rod
    (3) 30mm "speed spacers"
    (2) 20mm frame linkage standoffs
    (2) 30mm frame linkage standoffs
    42 pieces total, plus wood storage base

    Includes two open bore drifts for the following bearing sizes:
    2437, 22x37 (GXP Left), 6000, 6001, 6002, 6003, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904, 1526, 1728, 27.5x37 (SRAM Predictive Steering)

    Stock Level:
    1
    $594.01 (RRP)

    Add To Cart

  • Wheels MFG Press 2 Small Bearing
    Stock Code:
    WMTL-PRESS2

    Another indispensable tool for the professional bike shop, the Press-2 works with bearings that have an I.D. of 10mm or smaller (most front hub sealed bearing fall in this range).

    - This small bearing press features an aluminum base with 9 open bore and over axle adapters, and a quick release skewer.
    - Installs sealed bearing sizes 6801, 6802, 6803, 6900, 6901, R6, 688, 608, 609
    - All parts are laser etched for easy identification

    Stock Level:
    Out of Stock
    Expected Date:
    23 April 2019
    $313.62 (RRP)