Thomson

Thomson
  • THOMSON KFC CX CARBON HANDLEBAR
    • THOMSON KFC CX CARBON HANDLEBAR
    • THOMSON KFC CX CARBON HANDLEBAR
    • THOMSON KFC CX CARBON HANDLEBAR
    Stock Code:
    TNHB-HB-E110
    Stock Code:
    TNHB-HB-E128
    Stock Code:
    TNHB-HB-E129

    Description

    Thomson Cyclocross KFC-ONE (Katie Compton Signature) 40x31.8 Carbon
    Clipon compatible keep all accessory clamps inside the area marked on the bar as safe for clamping. 90mm total safe clamp area available.

    For Cyclocross we present the KFC-One, Katie Compton Signature ‘cross bar. Katie brings her multiple National Championships and European racing experience to give you a bar built her way for cross. The natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a completely round bar when wrapped. Top profile is round and as wide as possible. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands.

    Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.

    All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.

    Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.

    Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.

    Reach 78.5mm. Drop is proportional.
    Cross drops are: 40CM 131mm, 42CM 133mm, 44CM 135mm.

    Stock Level:
    2
    Stock Level:
    1
    Stock Level:
    Out of Stock
    Expected Date:
    04 April 2018
    $419.26 (RRP)
    $419.26 (RRP)
    $419.26 (RRP)

    Add To Cart

  • THOMSON DH ALLOY HANDLEBAR
    Stock Code:
    TNHB-HB-E115

    Description

    800mm wide, 20mm of rise, 9° of backsweep and 5° of upsweep. Built using 7050 Aluminum alloy for strength and long life. 65mm wide clamping area to fit our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 center section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems

    Bar is butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground.

    Bar is produced by advanced CNC bending to avoid the need for hand grinding. Almost all other bars are manually bent and bends are ground to appear smooth. CNC bending ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high.

    Weight 295 g

    The perfect addition to your Elite X4 Stem or Direct Mount Stem.

    Stock Level:
    Out of Stock
    Expected Date:
    04 April 2018
    $175.50 (RRP)

    Add To Cart

  • THOMSON GRAVEL ALLOY HANDLEBAR
    • THOMSON GRAVEL ALLOY HANDLEBAR
    • THOMSON GRAVEL ALLOY HANDLEBAR
    Stock Code:
    TNHB-HB-E130
    Stock Code:
    TNHB-HB-E131

    Description

    Our aluminum drop bars bring the performance, and dependability you have come to expect from Thomson. The lineup is available in 3 profiles, and varying widths. Each made from 7000 series aluminum. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.

    Our road bar wing section is small enough not to restrict hand movements when riding on the top, and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.

    The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm

    The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm

    The Dirt drop is available in 44cm, and 46cm, a wide drop bar with 25° flare ready for your next adventure, regardless of the road you choose.

    Stock Level:
    Out of Stock
    Stock Level:
    In Stock
    Expected Date:
    04 April 2018
    $220.00 (RRP)
    $220.00 (RRP)

    Add To Cart

  • THOMSON MID COMPACT CARBON HANDLEBAR
    • THOMSON MID COMPACT CARBON HANDLEBAR
    • THOMSON MID COMPACT CARBON HANDLEBAR
    • THOMSON MID COMPACT CARBON HANDLEBAR
    • THOMSON MID COMPACT CARBON HANDLEBAR
    Stock Code:
    TNHB-HB-E104
    Stock Code:
    TNHB-HB-E105
    Stock Code:
    TNHB-HB-E106
    Stock Code:
    TNHB-HB-E107

    Description

    Our road bar features a mild wing shape on top, clamping area wide enough for aero bars, mid-compact reach and drop. This is the modern bar for the modern road bike. Our Road bar wing section is small enough not to restrict hand movement when riding on the top and allows bar angle adjustment with out “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.

    Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.

    All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.

    Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.

    Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.

    1.5K woven impact ends help prevent damage to uni-directional fibers from impact.

    Reach 78.5mm.
    Drop is proportional. Road drops are: 40CM 137mm, 42CM 140mm, 44CM 140mm, 46CM 143mm

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $388.54 (RRP)
    $388.54 (RRP)
    $388.54 (RRP)
    $388.54 (RRP)

    Add To Cart

  • THOMSON ROAD AERO ALLOY HANDLEBAR
    • THOMSON ROAD AERO ALLOY HANDLEBAR
    • THOMSON ROAD AERO ALLOY HANDLEBAR
    • THOMSON ROAD AERO ALLOY HANDLEBAR
    Stock Code:
    TNHB-HB-E120
    Stock Code:
    TNHB-HB-E121
    Stock Code:
    TNHB-HB-E123

    Description

    Our aluminum drop bars bring the performance, and dependability you have come to expect from Thomson. The lineup is available in 3 profiles, and varying widths. Each made from 7000 series aluminum. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.

    Our road bar wing section is small enough not to restrict hand movements when riding on the top, and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.

    The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm

    The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm

    The Dirt drop is available in 44cm, and 46cm, a wide drop bar with 25° flare ready for your next adventure, regardless of the road you choose.

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $220.00 (RRP)
    $220.00 (RRP)
    $220.00 (RRP)

    Add To Cart

  • THOMSON ROAD ROUND ALLOY HANDLEBAR
    • THOMSON ROAD ROUND ALLOY HANDLEBAR
    • THOMSON ROAD ROUND ALLOY HANDLEBAR
    • THOMSON ROAD ROUND ALLOY HANDLEBAR
    Stock Code:
    TNHB-HB-E124
    Stock Code:
    TNHB-HB-E125
    Stock Code:
    TNHB-HB-E126

    Description

    Our aluminum drop bars bring the performance, and dependability you have come to expect from Thomson. The lineup is available in 3 profiles, and varying widths. Each made from 7000 series aluminum. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.

    Our road bar wing section is small enough not to restrict hand movements when riding on the top, and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.

    The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm

    The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm

    The Dirt drop is available in 44cm, and 46cm, a wide drop bar with 25° flare ready for your next adventure, regardless of the road you choose.

    Stock Level:
    2
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $220.00 (RRP)
    $220.00 (RRP)
    $220.00 (RRP)

    Add To Cart

  • THOMSON TRAIL ALUMINIUM HANDLEBAR
    Stock Code:
    TNHB-HB-E118

    Description

    The Thomson aluminum trail bar is 750mm wide with 20mm of rise, 8° of backsweep and 5° of upsweep. The clamping area is 50mm allowing a different bend profile for a more compliant ride. The Trail bar gives you a light aluminum all-around bar for your Mountain Bike.

    Stock Level:
    1
    $175.50 (RRP)

    Add To Cart

  • THOMSON TRAIL CARBON HANDLEBAR
    Stock Code:
    TNHB-HB-E103

    Description

    750mm wide and offers 12mm (1/2 inch) of rise together with a 6° backsweep and 4° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for All Mountain/Freeride, light enough for racing.

    Bars are made with three different fiber types with different tensile strength and tensile modulus, including High Strength carbon fibers. This helps to allocate stiffness and flex where needed.

    Bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.

    All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.

    1.5K woven impact ends help prevent damage to uni directional fibers from shortening the bar or impact with the ground.

    Weight 210g

    *NOT SUITABLE FOR BAR ENDS.

    Stock Level:
    In Stock
    $223.20 (RRP)

    Add To Cart

  • THOMSON XC CARBON HANDLEBAR
    Stock Code:
    TNHB-HB-E116

    Description

    A flat bar with an off center clamp area allowing a flat riding position and reversible for an 8mm drop for 29 inch bikes. 8° of backsweep for comfort. 730mm (29?) in width for plenty of leverage.

    Bars are made with three different fiber types with different tensile strength and tensile modulus, including High Strength carbon fibers. This helps to allocate stiffness and flex where needed.

    Bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.

    All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.

    1.5K woven impact ends help prevent damage to uni directional fibers from shortening the bar or impact with the ground.

    Weight 185g

    *NOT SUITABLE FOR BAR ENDS

    Stock Level:
    Out of Stock
    Expected Date:
    04 April 2018
    $223.20 (RRP)

    Add To Cart

  • THOMSON TITANIUM HANDLEBAR
    • THOMSON TITANIUM HANDLEBAR
    • THOMSON TITANIUM HANDLEBAR
    • THOMSON TITANIUM HANDLEBAR
    Stock Code:
    TNHB-HB-E108
    Stock Code:
    TNHB-HB-E109
    Stock Code:
    TNHB-HB-E113

    Description

    Titanium is a wonderful material for a handlebar. Not as light as carbon but for a little weight you get an unparalleled ride. Strength and beauty count for something as well. This bar will look good and ride well on your bike for years. Built for 31.8mm stems, no shims are used for clamping the Thomson Titanium bar. The very best bar you can buy for a rigid MTB.

    730mm x 6° backsweep x 31.8

    295 g

    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    In Stock
    $349.00 (RRP)
    $349.00 (RRP)
    $569.00 (RRP)

    Add To Cart