SURLY

SURLY
  • SURLY CLOWN SHOE RIM
    Stock Code:
    SLWR-RM0040

    100mm wide! Holy moley! Designed for use with 4.0–5.0? tires such as our Big Fat Larry, Bud or Lou, and of course a frame with appropriate clearance such as our Moonlander. Same 64h dual spoke pattern as Marge Lite and Rolling Darryl rims. Cutouts for weight reduction and rimstrip pimping.

    Hub Compatibility: 32h hubs

    ETRTO*: 559mm

    Weight: 960g

    Stock Level:
    2
    POA
  • SURLY MY OTHER BROTHER DARRYL RIM
    Stock Code:
    SLWR-RM0270

    Surly My Other Brother Darryl. 80mm wide for use with tires from 3.8." to 5" plus. My Other Brother Darryl uses a tubeless ready rim bed for easier tubeless tire setup with a no-stretch rim strip and tubeless rim tape.

    - 64 spoke holes (two sets of 32) to allow for a symmetric wheel build with an alternating lacing pattern, or an offset wheel build with a single row lacing pattern

    - Disc Brake use only. Not compatible with any rim brake systems

    Stock Level:
    Out of Stock
    POA
  • SURLY RABBIT HOLE RIM
    • SURLY RABBIT HOLE RIM
    • SURLY RABBIT HOLE RIM
    Stock Code:
    SLWR-RM0062
    Stock Code:
    SLWR-RM0060
    Stock Code:
    SLWR-RM0050

    · 64 dual row spoke holes for symmetric or asymmetric builds
    · Designed for tires with a minimum width of 2.4"
    · Disc Brake use only. Not compatible with any rim brake systems

    A 26inch version of our 50mm Rabbit Hole rim. Run tires as small as 2.3 or 2.4, or as large as 4inch (depending on the clearance of your frame) to get yourself more traction, simple suspension and float than you can get with standard width rims. Our semi-single wall design maintains rim strength and rigidity without adding significant weight. All our rims use a dual-row spoke hole design, allowing one rim to be built on-center or offset, depending on the type frame you’ll use. Just make sure you use a frame with proper clearance.

    Hub Compatibility: 32h hubs

    ETRTO*: 559mm

    Weight: 600g

    50mm wide, and technically a single wall with internal tubes to buttress it, the Rabbit Hole is designed in conjunction with our Knard 29 x 3? tire and Krampus frame to provide a wide, stable footprint that walks the line between the traction and float of fat bike rims and the speed and even greater obstacle crushing approach angle of 29ers. Its weight is more than a standard 29er rim but less than a fat bike rim, so there you go. It’s made of high quality 6061-T6 aluminum with a welded seam, and comes to you round and true because that’s part of what makes strong wheels. The Rabbit Hole will also spread 2.3–2.4? tires, but your frame needs to have enough space. Available in the same 64 dual row spoke holes as our other rims with weight-shaving cut-outs.

    Hub Compatibility: 32h hubs

    ETRTO*: 622mm

    Weight: 699g

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    2
    POA
    POA
    POA
  • SURLY ROLLING DARRYL RIM
    • SURLY ROLLING DARRYL RIM
    • SURLY ROLLING DARRYL RIM
    Stock Code:
    SLWR-RM0020
    Stock Code:
    SLWR-RM0122
    Stock Code:
    SLWR-RM0028

    The Surly Rolling Darryl rim. It's your platform for a big(ger) footprint.
    · Single wall construction, 82mm wide
    · For centered wheel building: alternate between rows of spoke holes, keeping the spokes from one side of the flange going to the row of spoke holes on the same side of the rim
    · Cutout versions save weight and show off your rimstrips
    · 82mm rims on a Pugsley may require drivetrain modification to avoid chain rub on the tire in the lowest gears; Surly MWOD crankset recommended in this instance
    · For offset wheel building: choose one row of spoke holes and stick to it
    · Rim has a unique 64 hole dual spoke hole pattern; allows for offset or non-offset wheelbuilding

    82mm wide single wall. Same 64 dual-spoke hole design as Marge Lite (now available in 72-hole for use with 36h hubs). This rim will increase the footprint of 3.8? tires compared to 65mm rims. Cutouts shave weight and allow your rimstrips to show through, which looks pretty cool we think. Note: Use of this rim will increase the width of your tire and may cause the chain to rub the tire in the lowest gears, so either remove a couple cogs and add some spacers behind the cassette or else get you an O.D. Crankset or some of our Mr. Whirly Offset Double chainrings. Available in 32-hole and seasonally 36-hole (without cutouts).

    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    2
    POA
    POA
    POA