PROBLEM SOLVERS

PROBLEM SOLVERS
  • Problem Solvers 10mm Canti Brk Boss Plug
    Stock Code:
    PSBR-FK9943

    Brake boss plugs are used to fill the void left in frames when cantilever bosses are removed. This prevents thread corrosion and cleans up the look of a frame.

    - 10 x 1.25 threading
    - ALLOY

    Stock Level:
    Out of Stock
    POA
  • PROBLEM SOLVERS S/S CLAMP ON CABLE GUIDE
    • PROBLEM SOLVERS S/S CLAMP ON CABLE GUIDE
    • PROBLEM SOLVERS S/S CLAMP ON CABLE GUIDE
    • PROBLEM SOLVERS S/S CLAMP ON CABLE GUIDE
    Stock Code:
    PSBR-CA0900
    Stock Code:
    PSBR-CA0901
    Stock Code:
    PSBR-CA0902

    Problem Solvers Stainless Clamp-on Cable Guides Set/3 available in 25.4, 28.6 & 31.8mm diameters.

    Our Clamp-on Cable Guides secure full housing on frames that don’t have cable stops or housing guides brazed on. Perfect for converting an older frame for use with larger diameter housing or for adding brakes to track frames.

    Problem Solvers 28.6 Stainless Clamp-on Cable Guides Set of 3

    Problem Solvers 31.8 Stainless Clamp-on Cable Guides Set of 3

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    2
    POA
    POA
    POA
  • Problem Solvers Cable Double 1:2
    Stock Code:
    PSBR-BR3341

    Problem Solvers Cable Doubler 1:2 allows one lever to operate two brakes

    Allows you to control two brakes with just one lever. Why? Well, there are myriad applications: cyclocross, fixies, tandems, bike polo, tricycles, recumbents, cycles for those with special needs, those four-person bikes you see on beach boulevards, and so on. You could even link them both together for ultimate redundancy!

    - Machined and anodized aluminum tube with Teflon coating ensures low friction
    - Setup requires three standard brake cables, two of which must be road cables

    Stock Level:
    In Stock
    POA
  • Problem Solvers Cable Doubler 2:1
    Stock Code:
    PSBR-BR3342

    Problem Solvers Cable Doubler 2:1 two levers and one brake

    Problem Solvers Cable Doubler 2:1 allows for two levers to operate the same brake. The 2:1 features precision counterbalance springs that allow for independent operation of two brake levers without feedback. Applications include Tri bikes wih aero bars, tandems and urban bike oddities. Keep your options open.
    · Includes precision counterbalance springs that allow for independent operation of two brake levers without feedback
    · Allows two levers to actuate one brake
    · Low profile machined aluminum tube hard anodized with Teflon allows low friction movement of the internal slider
    · 82mm in length; 18mm diameter

    Stock Level:
    2
    POA
  • PROBLEM SOLVERS CABLE HANGER
    • PROBLEM SOLVERS CABLE HANGER
    • PROBLEM SOLVERS CABLE HANGER
    Stock Code:
    PSBR-BR3358
    Stock Code:
    PSBR-BR3359
    Stock Code:
    PSBR-BR3360
    Stock Code:
    PSBR-BR3361
    Stock Code:
    PSBR-BR3363

    Clamp-on Cable Hanger1"Silver

    25.4mm clamp cable hanger for use with front cantilever brakes.

    28.6mm clamp cable hanger for use with front cantilever brakes.

    -Clamp-on cable hangers for 1-1/8" steerers

    -Includes noodle and cable guide

    -Black

    Interlok Cross Cable Hanger 28.6mm BLACK

    We increased the throw and the length for cyclocross. This allows you to mount the Cross Hanger at the bottom of your stack and reduces the length of cable to your carrier for more braking power.

    - 1-1/8" steerer tubes only
    - 35mm drop for more power and less brake chatter
    - 10mm forward throw to clear most headset cups
    - Includes adjuster barrel
    - 10mm forward extension to clear most headsets

    Stock Level:
    2
    Stock Level:
    In Stock
    Stock Level:
    2
    Stock Level:
    In Stock
    Stock Level:
    1
    POA
    POA
    POA
    POA
    POA
  • Problem Solvers Canti Stud 10x1mm
    Stock Code:
    PSBR-FS1169

    PS Cantilever Stud 10x1mm Each.

    Thread-in replacement studs for canti brake bosses.

    Stock Level:
    1
    POA
  • Problem Solvers Centerlock Adap w/lockri
    Stock Code:
    PSBR-BR0381

    Problem Solvers Centerlock Adaptor for 6-bolt Rotors with Lockring

    Stock Level:
    In Stock
    POA
  • Problem Solvers Double Barrel Lever left
    Stock Code:
    PSBR-BR2903

    Problem Solvers Double Barrel Brake Lever, Left

    · The Double Barrel lever pulls two long-pull brakes simultaneously
    · Forged aluminum lever and cast aluminum bracket
    · Three-finger design

    Stock Level:
    2
    POA
  • PROBLEM SOLVERS DUAL CABLE BACKSTOP
    • PROBLEM SOLVERS DUAL CABLE BACKSTOP
    • PROBLEM SOLVERS DUAL CABLE BACKSTOP
    • PROBLEM SOLVERS DUAL CABLE BACKSTOP
    • PROBLEM SOLVERS DUAL CABLE BACKSTOP
    Stock Code:
    PSBR-BR5454
    Stock Code:
    PSBR-BR5455
    Stock Code:
    PSBR-BR5456
    Stock Code:
    PSBR-BR5457

    Problem Solvers Backstop Frame-mounted clamp-on housing stop. For use when installing internal hubs or linear pull brakes on frames lacking necessary housing braze-ons.

    · Machined and anodized 6061 aluminum, hinged clamp, 14g for 1-1/8" (28.6mm)
    · Frame-mounted clamp-on housing to replace cable guide or lack of cable stop on frame

    Problem Solvers Backstop Frame-mounted clamp-on housing stop. For use when installing internal hubs or linear pull brakes on frames lacking necessary housing braze-ons.

    · Machined and anodized 6061 aluminum, hinged clamp, 14g for 1-1/4" (31.8mm)
    · Frame-mounted clamp-on housing to replace cable guide or lack of cable stop on frame

    Problem Solvers Backstop Frame-mounted clamp-on housing stop. For use when installing internal hubs or linear pull brakes on frames lacking necessary housing braze-ons.

    · Machined and anodized 6061 aluminum, hinged clamp, 14g for 1-3/8" (34.9mm)
    · Frame-mounted clamp-on housing to replace cable guide or lack of cable stop on frame

    Problem Solvers Backstop Frame-mounted clamp-on housing stop. For use when installing internal hubs or linear pull brakes on frames lacking necessary housing braze-ons.

    · Machined and anodized 6061 aluminum, hinged clamp, 14g for 1-1/2" (38mm)
    · Frame-mounted clamp-on housing to replace cable guide or lack of cable stop on frame

    Stock Level:
    2
    Stock Level:
    2
    Stock Level:
    Out of Stock
    Stock Level:
    2
    POA
    POA
    POA
    POA
  • Problem Solvers Fat Fork Disc Rotor Spac
    Stock Code:
    PSBR-BR0360

    Problem Solvers Fat Fork Disc Rotor Spacer

    Spaces rotor outboard for mounting 135mm REAR hubs on 135mm FRONT forks
    · One-piece alloy spacer, anodized black
    · Spacer is 4.8mm thick, includes mounting bolts

    Stock Level:
    In Stock
    POA
  • Problem Solvers Hydraulic Brake Guides
    Stock Code:
    PSBR-BR4115

    Problem Solvers Black Hydraulic Brake guides; pair

    Stock Level:
    Out of Stock
    Expected Date:
    23 April 2019
    POA
  • Problem Solvers Hydraulic Housing Guide
    Stock Code:
    PSBR-BR4120

    Problem Solvers Stick-On Hydraulic Housing Guide Bag of 5

    Stock Level:
    In Stock
    POA
  • PROBLEM SOLVERS MISMATCH ADAPTERS
    • PROBLEM SOLVERS MISMATCH ADAPTERS
    • PROBLEM SOLVERS MISMATCH ADAPTERS
    • PROBLEM SOLVERS MISMATCH ADAPTERS
    • PROBLEM SOLVERS MISMATCH ADAPTERS
    • PROBLEM SOLVERS MISMATCH ADAPTERS
    • PROBLEM SOLVERS MISMATCH ADAPTERS
    • PROBLEM SOLVERS MISMATCH ADAPTERS
    Stock Code:
    PSBR-BR0395
    Stock Code:
    PSBR-BR0394
    Stock Code:
    PSBR-BR0393
    Stock Code:
    PSBR-BR0392
    Stock Code:
    PSBR-BR0387
    Stock Code:
    PSBR-BR0397
    Stock Code:
    PSBR-BR0396

    Problem Solvers MisMatch Adaptor 1.1. Fits Shimano I-Spec B Brake levers to SRAM MatchMaker Shifters

    *RIGHT HAND ONLY

    · Accepts I-Spec-compatible shifters from Shimano
    · Attaches to MatchMaker-compatible brake clamps
    · CNC-machined & anodized black
    · Fits Shimano 2014 I-spec compatible brake levers to SRAM MatchMaker Compatible Shifters

    You need a MisMatch 1.1 adaptor for these model number Shimano brakes: BL-M820-B, BL-M785-B, BL-M675-B, BL-M640-B, BL-M615, BL-M506

    Problem Solvers MisMatch Adaptor 1.1. Fits Shimano I-Spec B Brake levers to SRAM MatchMaker Shifters

    · Accepts I-Spec-compatible shifters from Shimano
    · Attaches to MatchMaker-compatible brake clamps
    · CNC-machined & anodized black
    · Fits Shimano 2014 I-spec compatible brake levers to SRAM MatchMaker Compatible Shifters

    You need a MisMatch 1.1 adaptor for these model number Shimano brakes: BL-M820-B, BL-M785-B, BL-M675-B, BL-M640-B, BL-M615, BL-M506

    Problem Solvers MisMatch Adaptor 1.2, Shimano I-Spec II Brakes, SRAM Shifters, RIGHT ONLY

    You need a MisMatch 1.2 adaptor for these model number Shimano brakes: BL-M9000, BL-M8000, BL-M7000

    Problem Solvers MisMatch Adaptor 1.2, Shimano I-Spec II Brakes, SRAM Shifters

    You need a MisMatch 1.2 adaptor for these model number Shimano brakes: BL-M9000, BL-M8000, BL-M7000

    Boy howdy. When we started making little machined blocks to attach our SRAM shifters to our Shimano brakes, we had no idea it would be a whole product category for us. Now we’ve got four different MisMatch adapter styles to mate six different shift & brake lever combinations together. Why? Because handlebar space is precious, and every little bit of consolidation helps.

    Problem Solvers MisMatch 2.2 Adaptor, mates SRAM Brakes to Shimano I- Spec II Compatible Shifters

    - fits Shimano shifters: SL-M9000-I, SL-M8000-I, SL-M7000-I

    - Sold right-side only

    Problem Solvers MisMatch 2.2 Adaptor, mates SRAM Brakes to Shimano I- Spec II Compatible Shifters

    fits Shimano shifters: SL-M9000-I, SL-M8000-I, SL-M7000-I

    Stock Level:
    2
    Stock Level:
    In Stock
    Stock Level:
    Out of Stock
    Stock Level:
    Out of Stock
    Stock Level:
    1
    Stock Level:
    In Stock
    Stock Level:
    Out of Stock
    Expected Date:
    23 April 2019
    Expected Date:
    23 April 2019
    POA
    POA
    POA
    POA
    POA
    POA
    POA
  • Problem Solvers ReMatch Adapt 1.1 Pair
    Stock Code:
    PSBR-BR7000

    ReMatch adaptors are designed to integrate different generations of Shimano Brakes to Shimano Shifters.

    - Connects Shimano I-Spec A/B shifter to I-Spec II brake
    - Made from CNC Machined T6061 Aluminum
    - Anodized Black
    - Includes RH & LH adaptors
    - No additional hardware needed

    Stock Level:
    Out of Stock
    Expected Date:
    23 April 2019
    POA
  • Problem Solvers ReMatch Adapt 1.1 RH
    Stock Code:
    PSBR-BR7001

    ReMatch adaptors are designed to integrate different generations of Shimano Brakes to Shimano Shifters.

    - Connects Shimano I-Spec A/B shifter to I-Spec II brake
    - Made from CNC Machined T6061 Aluminum
    - Anodized Black
    - Includes RH adaptor only
    - No additional hardware needed

    Stock Level:
    Out of Stock
    Expected Date:
    23 April 2019
    POA
  • Problem Solvers ReMatch Adapt 1.2 Pair
    Stock Code:
    PSBR-BR7002

    ReMatch adaptors are designed to integrate different generations of Shimano Brakes to Shimano Shifters.

    - Connects Shimano I-Spec A/B brake to I-Spec II Shifter
    - Made from CNC Machined T6061 Aluminum
    - Anodized Black
    - Includes RH & LH adaptors, and all necessary hardware for both I-Spec A and I-Spec B brake
    - No additional hardware needed

    Stock Level:
    In Stock
    POA
  • Problem Solvers ReMatch Adapt 1.2 RH
    Stock Code:
    PSBR-BR7003

    ReMatch adaptors are designed to integrate different generations of Shimano Brakes to Shimano Shifters.

    - Connects Shimano I-Spec A/B brake to I-Spec II Shifter
    - Made from CNC Machined T6061 Aluminum
    - Anodized Black
    - Includes RH adaptor only, and all necessary hardware for both I-Spec A and I-Spec B brake
    - No additional hardware needed

    Stock Level:
    In Stock
    POA
  • Problem Solvers WideCable Carier 50mmSIL
    Stock Code:
    PSBR-BR0350

    Spanning 50mm, the Wide Cable Carriers can be mounted lower than conventional hangers, allowing for greater leverage and braking power, especially handy for 'cross setups. The extra clearance also makes it perfect for use with fenders.

    Stock Level:
    1
    POA