ENDURO

ENDURO
  • Enduro 24mm ID BB Press/Remove
    Stock Code:
    ENTL-BRT-003

    Description

    Tool for removal and install of press fit bb86/92 cups, and the bearings inside them.

    Stock Level:
    In Stock
    $271.50 (RRP)

    Add To Cart

  • Enduro 30mm ID BB Press/Remove
    Stock Code:
    ENTL-BRT-002

    Description

    This tool allows you to safely remove and install the 6806 bearings into any model BB30 bottom bracket. It will now also work with any PF30 system.

    Stock Level:
    In Stock
    $316.50 (RRP)

    Add To Cart

  • Enduro BB90 Tool
    Stock Code:
    ENTL-BBT-006

    Description

    This tool works in conjunction with the BRT-005 to press bearings into the BB90 bottom brackets. Will work with the Shimano and SRAM style bearings from Enduro Bearings.

    Stock Level:
    1
    POA
  • Enduro Bearing press Tool Set
    Stock Code:
    ENTL-BRT-005

    Description

    This tool set is for pressing bearings into hubs, pivots or some bottom brackets. Contains 12 bushings to fit all the major size bearings used in hubs and pivots.

    Stock Level:
    2
    $362.00 (RRP)

    Add To Cart

  • Enduro Bearing Puller 8-25mm
    Stock Code:
    ENTL-BBT-105

    Description

    Makes the removal of bearings simple and efficient.

    Fits 10-20mm I.D. bearings

    Stock Level:
    In Stock
    $9.00 (RRP)

    Add To Cart

  • Enduro Campy Ultra Tool
    Stock Code:
    ENTL-CT-006

    Description

    Tool for removing the bearings from the crank spindle on Campagnolo cranks.

    Stock Level:
    1
    POA
  • Enduro Campy UltraTorque Install Tool
    Stock Code:
    ENTL-CT-007

    Description

    These pilots work with the BRT-005 (Hub Press) to press new bearings onto the ultra torque cranks.

    Stock Level:
    1
    POA
  • Enduro Cannondale Spider Tool
    Stock Code:
    ENTL-CT-001

    Description

    This tool allows you to swap out the chain rings on Cannondale cranks by removing the spider.

    Stock Level:
    1
    POA
  • Enduro Cap Pin Tool
    Stock Code:
    ENTL-CT-002

    Description

    This tool allows you to remove the cap pin on the FSA, Cannondale and Zipp cranksets.

    Stock Level:
    1
    POA
  • Enduro DT ratchet tool/seal driver
    Stock Code:
    ENTL-BBT-013

    Description

    This tool set is designed to fully service DT Swiss hubs and other hub manufacturers that utilize DT Swiss hub internals. The set includes all the bearing guide sizes for front and rear hubs, two low-drag silicone freehub seals and a high-quality, ratchet removal tool.

    Stock Level:
    In Stock
    $232.65 (RRP)

    Add To Cart

  • Enduro Front Hub over axle press
    Stock Code:
    ENTL-BRT-045

    Description

    This tool is for pressing bearings into front hubs, and suspension pivots. The BRT-045 features a smaller diameter threaded rod for smaller bearing applications. This tool is designed to be used in conjunction with the NBT-030, needle bearing guides, and inner/outer bearings guides.

    Stock Level:
    1
    $217.50 (RRP)

    Add To Cart

  • Enduro Hollowgram Crank Tool
    Stock Code:
    ENTL-CT-008

    Description

    Tool for removing the crank arms off of Cannondale Hollowgram cranks. Utilizes a puller style thread straight into the crank arm, and presses against the spindle for safe removal.

    Stock Level:
    1
    POA
  • Enduro Lefty Hub Pin Tool
    Stock Code:
    ENTL-LHT-001

    Description

    Pin tool for removal/replace Lefty cap on Cannondale Lefty hubs.

    Stock Level:
    1
    POA
  • Enduro Needle Bearing Guide
    Stock Code:
    ENTL-NBT-030

    Description

    This is the tool for removal and installation of needle bearings in rear shocks on full suspension bicycles. These bearing guides are designed to be used with the BRT-045, front hub and needle bearing press.

    Stock Level:
    1
    POA
  • Enduro Outboard BB Tool Set
    Stock Code:
    ENTL-BRT-001

    Description

    Tool for removal and install of bearings into any standard outboard cups.


    NOTE: This tool is not compatible with 2013+ Shimano BB-9000 bottom brackets.

    Stock Level:
    Out of Stock
    $203.50 (RRP)
  • Enduro Pedal Dummy Tool
    Stock Code:
    ENTL-CT-010

    Description

    Tool for making adjustments on frame when pedals are not in place or present. Threads into crank arm and rotates on smooth steel bearings.

    Stock Level:
    In Stock
    $149.00 (RRP)

    Add To Cart

  • Enduro Pilot Bushing Set
    Stock Code:
    ENTL-BBT-004

    Description

    Toolset that includes outer guides for all the most common bearing sizes.

    Can be used in conjunction with our Hub Press Tool (BRT-005).

    Stock Level:
    1
    POA
  • Enduro Pro Bearing Removal Tool
    Stock Code:
    ENTL-BBT-200

    Description

    This tool set allows you to pull bearings that are pressed into a housing as found in all hubs and pivots. The slide hammer threads in 2 pieces for smaller bearing applications. This tool includes high-quality Stainless collets designed to remove bearings with an inside diameter between 8-40mm.

    Stock Level:
    1
    POA
  • Enduro Pro Fork Seal Tool
    Stock Code:
    ENTL-ST-010
    Stock Level:
    In Stock
    POA
  • Enduro Rotor 24mm Lockring Tool
    Stock Code:
    ENTL-CT-004

    Description

    This tool allows you to remove and replace the lockring for Rotor Cranksets with 24mm spindles. The Extrusion in the tool allows it to slide over the spindle.

    Stock Level:
    1
    POA
  • Enduro Rotor 30mm Lockring Tool
    Stock Code:
    ENTL-CT-003/2

    Description

    This tool allows you to remove and replace the lockring for either 30mm or compact spider new style on Rotor cranks.

    Stock Level:
    Out of Stock
    POA
  • Enduro Shimano Fixing Bolt Tool
    Stock Code:
    ENTL-BBT-001/B

    Description

    Tool for securing the crank fixing bolt on Shimano cranksets. Designed with a 3/8" drive on the back for torque wrench/breaker bar attachment

    Stock Level:
    Out of Stock
    $52.00 (RRP)
  • Enduro Shimano Tool
    Stock Code:
    ENTL-BBT-020
    Stock Level:
    1
    POA
  • Enduro Stainless Blind Hole Puller
    Stock Code:
    ENTL-BBT-100

    Description

    This tool set allows you to pull bearings that are pressed into a housing as found in all hubs and pivots. Works with any bearing with an inside diameter between 8-32mm.

    Stock Level:
    Out of Stock
    POA