Chris King
-
Stock Code:CKHS-PHS430Stock Code:CKHS-PHS434Stock Code:CKHS-PHS432Stock Code:CKHS-PHS625Stock Code:CKHS-PHS626Stock Code:CKHS-PHS813Stock Code:CKHS-PHS812Expected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024$34.48 (RRP)$34.48 (RRP)$34.48 (RRP)$52.99 (RRP)$52.99 (RRP)$52.99 (RRP)$52.99 (RRP)
-
Stock Code:CKHS-PHS476Stock Code:CKHS-PHS477Stock Code:CKHS-PHS641$5.19 (RRP)$5.19 (RRP)$5.19 (RRP)
-
Stock Code:CKHS-PHS006B
Chris King Black 1-1/8" Grip Nut Conversion Kit
Kit includes lock nut, threaded collet,adjusting ring and baseplate – all the pieces
you'll need to convert a NoThreadSet or 2Nut to a GripNut.
Please note that this systemis not intended for use with spacers.$108.93 (RRP) -
Stock Code:CKHS-PHS530SStock Code:CKHS-PHS456BStock Code:CKHS-PHS456RStock Code:CKHS-PHS532BStock Code:CKHS-PHS532RStock Code:CKHS-PHS532SStock Code:CKHS-PHS456WStock Code:CKHS-PHS456JStock Code:CKHS-PHS605BStock Code:CKHS-PHS605SExpected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024$29.31 (RRP)$29.31 (RRP)$40.00 (RRP)$29.31 (RRP)$29.31 (RRP)$29.31 (RRP)$40.00 (RRP)POA$32.77 (RRP)$32.77 (RRP)
-
Stock Code:CKHS-PHS710BStock Code:CKHS-PHS710RStock Code:CKHS-PHS711BStock Code:CKHS-PHS711RStock Code:CKHS-PHS711S
Chris King 1-1/8" Grip Lock Black Bearing Cap Assembly Bold Laser Mark Logo
$75.82 (RRP)$75.82 (RRP)$58.62 (RRP)$58.62 (RRP)$58.62 (RRP) -
Stock Code:CKWA-PHB780B
The Chris King ISO AB Torque Cap allows the new ISO AB boost front hub to take full advantage of the new Rock Shox forks.
$66.65 (RRP)Add To Cart
-
Stock Code:CKWA-PHB578
This axle is specifically for Gen 2 ISO DH rear hubs. They will not fit Gen 1 ISO DH hubshells.
Expected Date:06 June 2024POA -
Stock Code:CKBB-PBB018Stock Code:CKBB-PBB019Stock Code:CKBB-PBB003$18.97 (RRP)$18.97 (RRP)POA
-
Stock Code:CKWA-PHB712B
Adjustment clamps are used to adjust bearing preload on Chris King hubs.
- Includes one Adjustment Clamp
- Fits ONLY Chris King ISO B Rear Hubs with twin-bearing driver/axle$99.00 (RRP)Add To Cart
-
Stock Code:CKWA-PHB326$30.00 (RRP)
Add To Cart
-
Stock Code:CKBB-PBB023Stock Code:CKBB-PBB024
Fits:
• Press Fit 30 BB Shells
• 73mm Wide BB Shells
• 24mm>22mm Mountain Cranksets
• Common Cranks*: SRAM mtn, Zinn mtn, Bontrager mtn, TruVativ mtn$48.28 (RRP)$54.08 (RRP) -
Stock Code:CKTL-TBB007
The Chris King® Bottom Bracket External Cup Tool is anodized aluminum and features a 3/8" socket drive. Ahigh-quality torque wrench is recommended for installation. The spline interface on the reverse side perfectly matches the Chris King® Bottom Bracket cups to ensure a secure fit during installation while preventing damage to the finish of the bracket.
For use with Chris King Threadfit T47 30i and 24i Bottom Brackets.Expected Date:06 June 2024$90.00 (RRP) -
Stock Code:CKTL-TBB004
For installation of the bottom bracket we offer the Chris King BB External Cup Tool. Our cup tool is anodized aluminum and features a 3/8" socket drive and recommend use with a high-quality torque wrench. The spline interface is precision made to match our bottom bracket cups ensuring a secure fit during installation while preventing finish damage.
Fits Threadfit 24$72.42 (RRP)Add To Cart
-
Stock Code:CKTL-TBB006
Chris King Bottom Bracket cup installation tool required for the installation of Chris King ThreadFit™ 30, T47 30x and 24x bottom brackets.
Expected Date:06 June 2024$85.00 (RRP) -
Stock Code:CKBC-CKC0764
The King Bee is humble, hardworking, and reliable, knowing that it takes many small parts working together to make something great.
Specialized's 650ml Purist bottle with Mo-Flo top.$40.00 (RRP)Add To Cart
-
Stock Code:CKXT-CKC0550$38.00 (RRP)
Add To Cart
-
Stock Code:CKXT-CKC0770
Classic Chris King Logo in black and gold.
2x2.25"
Sold as an individual sticker$9.00 (RRP)Add To Cart
-
Stock Code:CKSC-PHS217B
Chris King headsets spacers are turned from solid bar-stock to ensure precise and parallel surfaces and guarantee proper headset preload. And they look great too.
Kits include a 3mm, 2x6mm, and 2x12mm, spacers.$89.00 (RRP)Add To Cart
-
Stock Code:CKBB-ABBY
Built on the familiar BSA threading, the ThreadFit™ 30 is reliable. A silky smooth, long-lasting bottom bracket built around our angular contact bearings that wear in instead of out. The ThreadFit™30 is made for 30mm spindles.
Fully serviceable and backed by our 5-year built-to-last warranty this bottom bracket will outlast your bike. Built to ultra tight aerospace tolerances we use machined Delrin spindle sleeves to create a perfect, and precise, fit between cranks and frame, providing ultra low drag, and a butter smooth feel.
* Uses Chris King bottom bracket cup tool for installation
** A Fit Kit is required for use$330.00 (RRP)Add To Cart
-
Stock Code:CKBB-AAB1Stock Code:CKBB-AAR1Stock Code:CKBB-AAS1Stock Code:CKBB-AAT2Stock Code:CKBB-AAY1
REQUIRES A CHRIS KING THREADFIT24 FIT KIT
ThreadFit™ 24 fits 24mm cranks in 68mm BB shells.
Our ThreadFit™ 24 bottom bracket is designed and built to be durable, serviceable, and silent. Manufactured to create the most precise interface between your frame’s bottom bracket shell and your cranks, it makes your cranks spin lightly and easily, without interference, for the lifetime of your bike (with a little regular service). King’s legendary, angular-contact bearings, both steel and ceramic, are the best in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
Our Threadfit™ 24 bottom brackets come in an array of beautifully anodized colors and each one includes a Fit Kits that allow our ThreadFit™ 24 to be used with a wide selection of road and mountain bike cranks.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for use$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP) -
Stock Code:CKBB-ABB1Stock Code:CKBB-ABR1Stock Code:CKBB-ABS1Stock Code:CKBB-ABY1Stock Code:CKBB-ABM2Stock Code:CKBB-ABZ1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ 30 fits 30mm spindle cranks in 68mm BB shells and SRAM DUB cranks.
Our ThreadFit™ 30 bottom bracket is silky smooth and long-lasting thanks to our legendary, angular-contact bearings, both steel and ceramic, the best in the industry. They actually get faster over time as their contact surfaces wear, because we build them to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag and butter smooth feel come from.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
Our Threadfit™ 30 bottom brackets come in an array of beautifully anodized colors and each one includes a Fit Kit that allows it to be used with a wide selection of road and mountain bike cranks.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for use
- Uses Chris King bottom bracket cup tool for installationExpected Date:06 June 2024$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP) -
Stock Code:CKLU-THB030
Chris King Blue Grease is a resilient lubricant optimized for headsets and as a general assembly compound. Viscous and tacky, Blue Grease is an ideal headset bearing lubricant and assembly compound, engineered to withstand extreme riding conditions.
$125.00 (RRP)Add To Cart
-
Stock Code:CKLU-THB029
Chris King Blue Grease is a resilient lubricant optimized for headsets and as a general assembly compound. Viscous and tacky, Blue Grease is an ideal headset bearing lubricant and assembly compound, engineered to withstand extreme riding conditions.
Expected Date:06 June 2024$43.23 (RRP)
