Chris King BB ThreadFit30/T47x Cup Tool

You may also be interested in...

• 

  ×

  Stock Code:

  WMTL-BBTOOL-48-44

  Wheels MFG Bottom Bracket Socket

  Double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Compatible with all Wheels Manufacturing bottom brackets. Socket is machined for 1/2" drive, but a 3/8" to 1/2" adapter is included so you can use it with 3/8" drive torque wrenches.
  
  48.5mm, 16-notch pattern matches up with Wheels Mfg bottom brackets, along with some FSA MegaEVO bottom brackets. The 44mm, 16-notch side matches up with Wheels Manufacturing bottom brackets, along with many other outboard bearing bottom brackets including Shimano, FSA MegaEXO and SRAM/Truvativ.

  Stock Level:

  In Stock

  Stock Level:

  In Stock

  $100.80 (RRP)

  Add To Cart

  Qty:
• 

  ×

  Stock Code:

  WMTL-24X37-EXT

  Wheels MFG 24x37(24mm) Bearing Extractor

  Individual extractor for removing 24x37 sealed bearings with 24mm inside diameter.
  
  These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
  
  All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.

  Stock Level:

  2

  Stock Level:

  2

  $49.35 (RRP)

  Add To Cart

  Qty:
• 

  ×

  Stock Code:

  WMTL-BE-22MM-SET

  Wheels MFG 22mm Bearing Extractor Set

  Sealed bearing extractor for 22mm ID (GXP) bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles.
  
  This extractor is part of a system that requires additional pieces to function.

  Stock Level:

  2

  Stock Level:

  2

  $38.85 (RRP)

  Add To Cart

  Qty:
• 

  ×

  Stock Code:

  WMTL-BP0018

  Wheels MFG Thin Flange BB Socket 48mm

  Thin Flange Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 48.5mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 Aluminum Anodized Red.

  Stock Level:

  In Stock

  Stock Level:

  In Stock

  $84.00 (RRP)

  Add To Cart

  Qty:
• 

  ×

  Stock Code:

  WMTL-EX0003

  Wheels MFG BB Extractor Essential Kit

  These extractors remove sealed bearings with inside diameters from 22, 24, 29, and 30mm
  
  Bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
  
  All extractors are size-specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.
  
  Removes these sealed bearing sizes: 6806, 24x37, 29DUB, GXP22
  
  4-piece set includes:
  
  (1) 22mm ID Bearing Extractor
  (1) 24mm ID Bearing Extractor
  (1) 29mm ID Bearing Extractor
  (1) 30mm ID Bearing Extractor
  (1) Spare parts bag
  (1) bolt set

  Stock Level:

  In Stock

  Stock Level:

  In Stock

  $199.50 (RRP)

  Add To Cart

  Qty: