- Home /
- Lube /
- Lubes, Grease, & oil /
- Juice Lubes Chain Juice Wet 100ml bottle
Juice Lubes Chain Juice Wet 100ml bottle
Description
Juice Lubes Chain Juice Wet 100ml bottle (Chain Lube)
Chain Juice Wet – For Wet Riding Conditions
Chain Juice Wet is a wet conditions chain lube which does what a wet lube should – it stays on your chain and keeps lubricating in wet conditions. Simple. You get a handy twist top flow regulator cap for easy and precise application which also removes the problem of ever losing the lid!
How To Use:
Un-screw nozzle and pierce security seal. Re-attach nozzle.
For top performance, apply to a degreased chain (Use Dirt Juice Super Gnarl for this!) and wipe off excess before starting your ride.
Size: 100ml
Webshops and Bike shops
You may also be interested in...
-
Stock Code:JLLU-0304
Juice Lubes Frame Juice Gleaming Frame Polish 400ml (Areosol)
Showroom Shine with a Very Pleasing Scent!
You know how annoying it is to look at your cleaned and gleaming wet bike and feel all proud of your hard work, only to turn round 5 minutes later when its dried off, to be confronted with the same cack stained bike that was there an hour ago, just minus the clods of mud? Well, be frustrated no more as Juice Lubes buffing marvellous Frame Juice will sort this little problem out in no time.
How To Use
After cleaning your frame with Dirt Juice and rinsing with fresh water, allow frame to dry. Then, spray directly on to the area you want shiny again (TAKE CARE TO AVOID CONTACT WITH ANY BRAKING SURFACES) Finally, buff with a clean rag to your level of satisfaction. It will also leave the surface slippery, making cleaning next time round that bit easier and quicker as well.
Size: 400mlStock Level:In StockStock Level:In Stock$26.22 (RRP)Add To Cart
-
Stock Code:SHLU-LU2007
Slick Honey has a superior ability to reduce sliding friction making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts that require a super-slick yet mildly tacky grease.
· Slick Honey is waterproof, highly resistant to washout, and has a working temperature range of -65 F to 250 F
· Safe for use with elastomers, microcellular urethane (MCU) elastomers, o-rings, and oil baths
· Rust and corrosion inhibitors prevent seizure in bike partsStock Level:In StockStock Level:In StockPOA -
Stock Code:JLLU-MFD500
Frame Juice Matt is your Blueberry scented secret formula to a beautiful matt finish. It protects and preserves, stepping in to buff your bike to brilliance leaving no streaks, smears or oily marks.
It restores matt paint jobs, vinyl and plastic parts back to good-as-new brilliance and leaves a dry, non-sticky protective force-field behind that will shrug off mud and water. Did we mention it also smells nice and it's biodegradable?
It works a treat on mountain bikes, road bikes and everything in between.
Perfect for polishing your helmet... buffs those matt bits back to brilliance and leaves a mud-resistant, protective coat.Stock Level:In StockStock Level:In Stock$25.00 (RRP)Add To Cart
-
Stock Code:WTLU-LUBE-WT1-0_5OZ
WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions
- Optimal choice for complex modern drivetrains
- Easy to use. Quick to apply.
- Also works on other places of your bike, including hubs, cables, and pulley wheels
APPLICATION PROCESS
Ease of use is important in selecting a chain lubricant and chain treatment. The complete application process of WT-1 Chain Lube takes less than a minute and there is no need to clean your chain before getting started.
Here’s how to begin using WT-1 Chain Lube:
1. Shake bottle of WT-1 for 30 seconds. A ball bearing is present in every bottle to help mix things up.
2. Apply one drop to each roller of your chain. We recommend applying WT-1 Chain Lube to the top side of your chain between your derailleur and chainring, just in front of that lower pulley wheel.
3. Backpedal 20-30 times. This helps WT-1 Chain Lube find its way between all the pieces of your chain.
4. Wipe chain with microfiber cloth until it appears clean with a light sheen. It'll look extra dirty at first, then it will clear up as you wipe away that dirt.
5. Ride your bike. Reapply at least once every 650km
After your first couple applications, you’ll notice that your chain looks extra dirty following your first few rides. This means that WT-1 Chain Lube is working because that detergent-like additive has made its way into the gaps and crevices of your chain and is actively pushing out dirt, grease, and debris. You’ll want to wipe down your chain after those first few rides to remove chain contaminants. As you ride more and more, you’ll see WT-1 get into its stride and your chain will be clean, silent, and efficient.Stock Level:In StockStock Level:In Stock$17.80 (RRP)Add To Cart
-
Stock Code:WTLU-LUBE-WT1-2OZ-12PK
WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions
- Optimal choice for complex modern drivetrains
- Easy to use. Quick to apply.
- Also works on other places of your bike, including hubs, cables, and pulley wheels
APPLICATION PROCESS
Ease of use is important in selecting a chain lubricant and chain treatment. The complete application process of WT-1 Chain Lube takes less than a minute and there is no need to clean your chain before getting started.
Here’s how to begin using WT-1 Chain Lube:
1. Shake bottle of WT-1 for 30 seconds. A ball bearing is present in every bottle to help mix things up.
2. Apply one drop to each roller of your chain. We recommend applying WT-1 Chain Lube to the top side of your chain between your derailleur and chainring, just in front of that lower pulley wheel.
3. Backpedal 20-30 times. This helps WT-1 Chain Lube find its way between all the pieces of your chain.
4. Wipe chain with microfiber cloth until it appears clean with a light sheen. It'll look extra dirty at first, then it will clear up as you wipe away that dirt.
5. Ride your bike. Reapply at least once every 650km
After your first couple applications, you’ll notice that your chain looks extra dirty following your first few rides. This means that WT-1 Chain Lube is working because that detergent-like additive has made its way into the gaps and crevices of your chain and is actively pushing out dirt, grease, and debris. You’ll want to wipe down your chain after those first few rides to remove chain contaminants. As you ride more and more, you’ll see WT-1 get into its stride and your chain will be clean, silent, and efficient.Stock Level:1Stock Level:1POA